Products

SH+PH air quick coupler

Improve efficiency, complete pneumatic tool switching in 10 seconds
Strong sealing performance, sealing leakage rate <0.1%, four-layer rubber sealing ring protection
Ordinary two-handed operation, reducing the labor intensity of staff
Strong compatibility, with internal thread style, external thread style, direct connection air pipe style, each model can be connected and used

SKU:

Model:	Connecting pneumatic hose type：	Model:	Connecting pneumatic hose type：
SH-20	PU Tube：12*8	PH-20	PU Tube：12*8
SH-30	PU Tube：14*10	PH-30	PU Tube：14*10
SH-40	PU Tube：16*12	PH-40	PU Tube：16*12

Share with friends:

SH+PH air quick coupler Introduction:

MYFEQD’s SH+PH air quick coupler is a pneumatic quick coupler that directly connects the pneumatic hoses at both ends, suitable for convenient and quick disconnection and connection of air pressure. It adopts a mechanical locking structure, which can achieve quick connection and disassembly, greatly reducing the labor intensity of manual installation.
Its overall structure is made of carbon steel (08Al steel), and after a series of processes such as pickling and chrome plating, it is more beautiful, corrosion-resistant, wear-resistant, high-strength, and not easy to rust. It requires two-handed operation, commonly known as semi-automatic pneumatic quick connector.
Connect various types of pneumatic hoses. Such as: PU/PA/PE/PEE/tube

Order Code:

Technical parameters:

Fluid:	Air,If use liquid please contact factory
Max.proof Pressure:	1.32Mpa (13.5kgf/cm²）
Working Pressure Range:	0~0.9Mpa (0~10.2kgf/cm²）
Ambient Temperature:	0~60℃
Applicable Pipe:	PU/PA/PE/PEE Tube

Interface requirements:

SH-20	It requires a pneumatic hose with an inner diameter of 8mm for connection.
SH-30	It requires a pneumatic hose with an inner diameter of 10mm for connection.
SH-40	It requires a pneumatic hose with an inner diameter of 12mm for connection.
PH-20	It requires a pneumatic hose with an inner diameter of 8mm for connection.
PH-30	It requires a pneumatic hose with an inner diameter of 10mm for connection.
PH-30	It requires a pneumatic hose with an inner diameter of 12mm for connection.