– Uses only compressed air; eliminates the need for a hydraulic power unit, resulting in lower costs and simple installation.
– Delivers high output force with a compact footprint; smaller than a hydraulic cylinder for the same force output.
– Provides stable output with adjustable pressure and stroke.
– Operates quietly and carries a lower risk of oil leakage compared to standalone hydraulic systems.
İmalat sektöründe 20 yıllık deneyimimizle, tam olarak sizin teknik şartnamelerinize ve üretim gereksinimlerinize uygun özel çözümler sunuyoruz.
20 yılı aşkın deneyimÖnde gelen ulusal ve uluslararası markaların teknik standartlarına titizlikle uyduğumuzdan, sunduğumuz kalite büyük markaların kalitesiyle boy ölçüşebilmektedir.
ISO Standartlarına Uygun KaliteÇin’in Zhejiang Eyaleti, Wenzhou Şehri, Yueqing İlçesi, Liushi’de bulunan şirketimiz, kapsamlı bir ürün bileşenleri tedarik zincirine, gelişmiş ve üst düzey ekipmanlara ve köklü bir üretim geleneğine sahiptir.
Doğrudan Fabrika FiyatlandırmasıA booster cylinder (also known as a pneumatic-hydraulic booster cylinder or force-amplifying cylinder) is a force-amplifying actuator that combines pneumatic and hydraulic technologies;
it accepts low-pressure compressed air as input and outputs high-pressure hydraulic force,
requiring only an air supply and no hydraulic pump station.

1. Integrated design requiring only an air supply; eliminates the need for oil pumps, oil tanks, and hydraulic power units, simplifying installation.
2. Rapid approach to the workpiece with pre-pressure; automatic pressure intensification upon contact ensures a “soft landing” to protect the mold.
3. High output force; more compact than hydraulic cylinders of the same tonnage, with low noise operation.
4. Pressure is adjustable via an air pressure regulator; maintenance is simple.
| Ürün | Total Output (T) | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| 1 | 3 | 5 | 10 | 13 | 15 | 20 | 30 | 40 | |
| Bore (mm) | 63 | 63 | 80 | 100 | 100 | 125 | 125 | 125 | 160 |
| Eylem Türü | Çift Etkili | ||||||||
| Çalışma Ortamı | Air (filtered through 40μm) + ISO VG68 Oil, 2~7 kg/cm² | ||||||||
| Çalışma Sıcaklığı | -5°C ~ +60°C | ||||||||
| Operating Speed | 50~700 mm/s | ||||||||
| Oil Cylinder Proof Pressure | 300 kg/cm² | ||||||||
| Air Cylinder Proof Pressure | 15 kg/cm² | ||||||||
| Operating Frequency | 20~30 cycles/min | 10 cycles/min | |||||||
| Piston Kolunun Uçundaki Diş | M30×1,5 | M30×1,5 | M30×1,5 | M39×2 | M39×2 | M48×2 | M48×2 | M48×2 | M63×2 |
| Liman Konusu | G3/8 | G1/2 | |||||||

1. High-speed reciprocating motion; suitable for continuous operation with short cycle times on automated production lines.
2. Strict separation of oil and air minimizes bubble formation, ensuring more stable output and longer seal life.
3. Integrated design; supports standard vertical mounting (output force directed downward) as well as horizontal installation.
4. Pressure is adjustable via an air supply regulator; maintenance is simple.
| Ürün | Total Output (T) | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| 1 | 3 | 5 | 10 | 13 | 15 | 20 | 30 | 40 | |
| Bore (mm) | 63 | 63 | 80 | 100 | 100 | 125 | 125 | 125 | 160 |
| Eylem Türü | Çift Etkili | ||||||||
| Çalışma Ortamı | Air (filtered through 40μm) + ISO VG68 Oil, 2~7 kg/cm² | ||||||||
| Çalışma Sıcaklığı | -5°C ~ +60°C | ||||||||
| Operating Speed | 50~1000 mm/s | ||||||||
| Oil Cylinder Proof Pressure | 300 kg/cm² | ||||||||
| Air Cylinder Proof Pressure | 15 kg/cm² | ||||||||
| Operating Frequency | 20~30 cycles/min | 10 cycles/min | |||||||
| Piston Kolunun Uçundaki Diş | M30×1,5 | M30×1,5 | M30×1,5 | M39×2 | M39×2 | M48×2 | M48×2 | M48×2 | M63×2 |
| Liman Konusu | G3/8 | G1/2 | |||||||

1. Maintains high-pressure thrust throughout the entire piston rod stroke; no need for workpiece contact to trigger pressure intensification.
2. Compact, integrated design allows for easy installation and eliminates the need for a hydraulic pump station.
3. Delivers stable output force; pressure can be adjusted via an air supply regulator.
4. Features a built-in pressure gauge port for direct pressure monitoring.
| Ürün | Total Output (T) | |||||
|---|---|---|---|---|---|---|
| 1 | 2 | 3 | 5 | 8 | 13 | |
| Bore (mm) | 50 | 50 | 50 | 50 | 80 | 80 |
| Eylem Türü | Çift Etkili | |||||
| Çalışma Ortamı | Air (filtered through 40μm) + ISO VG32 Oil, 2~7 kg/cm² | |||||
| Çalışma Sıcaklığı | -5°C ~ +60°C | |||||
| Operating Speed | 50~700 mm/s | |||||
| Oil Cylinder Proof Pressure | 300 kg/cm² | |||||
| Air Cylinder Proof Pressure | 15 kg/cm² | |||||
| Operating Frequency | ≥ 20 cycles/min | |||||
| Piston Kolunun Uçundaki Diş | M16×2 | M16×2 | M16×2 | M30×1,5 | M30×1,5 | M39×2 |
| Liman Konusu | G1/4 | G1/4 | G1/4 | G1/4 | G3/8 | G1/2 |

1. Special sealing materials ensure the sealing performance of the hydraulic cylinder;
2. The hydraulic cylinder barrel undergoes special treatment, significantly enhancing wear and corrosion resistance;
3. Features a spindle air-blast function.
| Total Output at 0.6MPa | 3,5 ton | 4,5 ton | 6,0T |
|---|---|---|---|
| Eylem Türü | Oil End: Single Acting Air End: Double Acting | ||
| Çalışma Ortamı | Air (filtered through 40μm) + ISO VG32 Oil, 2~7 kg/cm² | ||
| Çalışma Sıcaklığı | -5°C ~ +60°C | ||
| Çalışma Basıncı Aralığı | 0.5~0.8 MPa | ||
| Air Cylinder Proof Pressure | 1,0 MPa | ||
| Liman Konusu | PT3/8 | PT3/8 | PT3/8 |
| Hayır. | Series | Tür | Temel Özellikler | Typical Application |
|---|---|---|---|---|
| 01 | MPT | Standard pre-press booster | Most common standard air-oil booster; faster than hydraulic, oil-level output; total stroke adjustable; leak-proof design; output 1T–40T; simple setup, easy maintenance, low noise | General press-fitting, punching, riveting, bending; electronics / automotive |
| 02 | MPTF | High-speed booster | Upgraded from MPT for speed; fast pre-press approach and quick boost response; high-cycle operation; for high-takt automation lines | High-frequency press-fitting, fast stamping, assembly lines |
| 03 | MPTC | Direct-press booster | Direct-pressure structure (no pre-press stroke, presses in one go); short stroke, high force; more compact body; for direct-force applications | Short-stroke press, riveting, punching |
| 04 | NPM | Compact booster | Compact mounting variant; same air-oil principle as MPT but smaller footprint; for space-constrained booster stations | Compact equipment, small press-fitting |
Bu web sitesinde bahsedilen marka isimleri, yalnızca teknik standartlara ilişkin referans amacıyla belirtilmiştir. Bu ürün, söz konusu markanın orijinal bir ürünü değildir ve söz konusu marka tarafından onaylanmamıştır. İlgili markanın teknik özelliklerine uygun olarak üretilmiş olup benzer bir görünüme sahiptir; ancak, bağımsız olarak geliştirilmiş bir üründür ve söz konusu markayla herhangi bir bağlantısı bulunmamaktadır.
Suitable for stamping, press-fitting, riveting, punching,
bending, fixture clamping, and mold locking; widely used in automation equipment for applications such as bearing pressing,
plastic component pressing, and hardware riveting.
Torba besleme, kapatma kafası, hazne kapağı, karton kanat katlama, boşaltma itici
İş parçasının konumlandırılması ve sıkıştırılması, yükleme ve boşaltma için kaldırma mekanizmaları, durdurma mekanizmaları ve bileşenlerin presle takılması.
Kaynak fikstürünün konumlandırılması, iş parçasının sıkıştırılması ve bileşenlerin aktarımı
Montaj hattı durdurucuları, ayırma iticileri ve palet kaldırma üniteleri.
Takım tezgahının kapılarının açılması/kapanması, iş parçasının beslenmesi ve hurdanın dışarı atılması.
Konveyör kılavuz plakası, basit sabitleme tertibatı (nemli ortamlar için paslanmaz çelik versiyonu mevcuttur)
MYFEQD kapsamlı bir ürün yelpazesi sunar Booster Cylinder çözümler.
Pnömatik aktüatörlerimiz, önde gelen küresel markaların teknik standartlarına uygundur,
çeşitli endüstrilerde model seçimi için hızlı çözümler sunmak
pnömatik sistemler.
No hydraulic power unit, pump or oil lines—high force from shop air, clean, energy-saving and low maintenance.
A pneumatic-hydraulic hybrid: air input, high-pressure oil output—a converter and amplifier.
Low-pressure fast approach saves time; high pressure engages only after contact, balancing speed and force.
Air drives the booster piston, compressing a sealed oil chamber; oil is incompressible, so pressure spikes.
Insufficient oil lets air enter the oil during stroke, causing unstable force, creeping and noise.
If oil runs out before the stroke ends, cavitation occurs; oil must cover the full stroke.
Complete air-oil separation prevents gas mixing, stabilizing force and avoiding cavitation/emulsification.
Output tonnage, total stroke and power stroke.
Pre-pressure is taller with two-stage structure; direct-pressure is shorter with one stage.
High-speed type, large-flow valve and air-oil separated design.
Fill to the gauge mark via the filler port and vent air initially.
Different ports/valves control them; boost triggers after contact.
Check supply pressure, internal leakage, low oil and valve leaks.
Dry hits release high force without a workpiece, shocking and damaging parts.
Damaged seals, overfilled oil, damaged barrel or oil through the valve.
Provide process, workpiece, tonnage, strokes and dimensions for the manufacturer to assist.

Çin'deki Pnömatik Üreticileri