Products

pneumatic valve 2P series

  • Direct-acting, normally closed, 2-port 2-position solenoid valve; features rapid and sensitive switching.
  • Compact structure, small size, and lightweight; easy to install and disassemble.
  • Valve body made of Nylon 66; equipped with a Class B solenoid coil and Viton seals;
  • suitable for a wide range of working media. 4. Coil protection rating is IP65; electrical connection is via direct lead wires.

Share with friends:


Model2P025-062P025-08
Working MediumAir, Water, Oil
Actuation TypeDirect Acting
Initial StateNormally Closed
Position Number2 Port 2 Position
Port ThreadPT1/8PT1/4
Orifice Diameter2.5 mm
Cv Value0.23
Operating Pressure Range0~0.7 MPa
Fluid Viscosity≤ 20 CST
Proof Pressure1.05 MPa
Working Temperature-20°C ~ +70°C
Seal MaterialVITON
Body MaterialEngineering Plastic & Brass Optional
Port Thread TypePT, NPT, G
Standard VoltageAC220V, AC110V, AC24V, DC24V, DC12V
Voltage ToleranceAC: ±15%  DC: ±10%
Power Consumption(AC: 7VA), (DC: 7W)
Insulation ClassClass B
Electrical EntryDIN Plug Type / Lead Wire Type
Response Time0.05 sec or less



2P Series 2-Way Pneumatic Solenoid Valve Order Code Generator

Current Order Code:
B-2P025-06-A-IG

Notes:
1. 2P = 2-way 2-position solenoid valve, bore 025 (2.5mm). Body: B = engineering plastic, C = brass.
2. Port: 06(1/8) / 08(1/4). Wiring: I = lead wire (fixed). Thread: G = G thread (fixed).
3. Voltage: A=AC220V, B=DC24V, C=AC110V, E=AC24V, F=DC12V.
▲ For non-standard options or special requirements, please contact sales.

MYFEQD Logo NEW2

Send us a message

Pneumatic Manufacturers in China