Products

push button pneumatic valve VM100 series

  • Poppet-style valve design; compact and lightweight—the base model weighs only about 60g—saving installation space and making it ideal for tight, confined workspaces.
  • Wide pressure range: -100 kPa to 1.0 MPa; suitable for vacuum circuits (note: the VM200 series does not support negative pressure).
  • Comprehensive selection of actuators—including straight plungers, roller plungers, side rollers, toggle levers, and mushroom-head buttons—all of which are interchangeable.
  • Two piping configurations: side-ported and bottom-ported (bottom-porting is exclusive to the VM100 series). Supports bracket mounting, direct screw mounting, and panel mounting.
  • Non-lube design; typically requires no oil supply. If lubrication is necessary, use ISO VG32 turbine oil (Type 1).
  • Low flow capacity (Cv ≈ 0.11); suitable for short piping runs and small-signal circuits, but not for main control circuits of high-flow cylinders.
  • Resistant to shock and vibration with highly responsive actuation; well-suited for high-frequency limit-switching applications.

Share with friends:


ItemInformation
FluidAir, Inert Gas
ActuationExternal pilot direct acting
Operating Pressure-0.1~1.0 MPa
Proof Pressure1.5 MPa
Ambient Temperature-5~60°C
Effective Area2.5 mm²
Port ThreadSide: PT1/8; Bottom: M5×0.8
LubricationNot required (if lubricated, use Turbine Oil No.1 ISO VG32)



VM100 Series Push Button Pneumatic Valve Order Code Generator

Current Order Code:
VM1-2-0-01-00
VM1
2
2
3
0
4
01
5
00
6
–
7
–






Notes:
1. Ports: 2 = 2 way, 3 = 3 way. Mounting: 0/1 = side piping, 2/3 = bottom piping.
2. Thread: 01=PT1/8 for side (0/1); M5 for bottom (2/3), auto-matched to mounting.
3. Actuator suffix: P/S = roller material (only 01/02/06/07); R/B/G/Y = button color (only 30/32/33).
4. Indicator Z = mini indicator light, only available for bottom piping (2/3).

MYFEQD Logo NEW2

Send us a message

Pneumatic Manufacturers in China