Features a flat, compact design with an ultra-thin cylinder body, making it suitable for equipment with limited installation space; allows for direct mounting via countersunk screws on the end face—eliminating the need for additional brackets—for convenient installation.
20 años de experiencia en el sector manufacturero, ofreciendo soluciones a medida que se adaptan a tus especificaciones exactas y a tus necesidades de producción.
Más de 20 años de experienciaLa calidad que ofrecemos está a la altura de la de las principales marcas, ya que cumplimos estrictamente con las normas técnicas de las marcas líderes nacionales e internacionales.
Calidad conforme a las normas ISOSituada en Liushi, Yueqing, Wenzhou, provincia de Zhejiang (China), nuestra empresa cuenta con una completa cadena de suministro de componentes, equipos avanzados de alta gama y una larga tradición en la fabricación.
Precios directos de fábricaCompact thin air cylinders—also known as compact cylinders—are short-bodied,
double-acting cylinders characterized primarily by their short axial length and minimal installation space requirements;
they are the most commonly used actuators for confined workstations in automated tooling.
| Bore (Inner Diameter mm) | 12 | 16 | 20 | 25 | 32 | 40 | 50 | 63 | 80 | 100 | |
|---|---|---|---|---|---|---|---|---|---|---|---|
| Action Type | Single-acting extend type, Double-acting type, Single-acting retract type | ||||||||||
| Working Medium | Air (Filtered with 40μm or finer filter) | ||||||||||
| Temperatura de trabajo | -20~70°C | ||||||||||
| Operating Pressure Range | Double-acting: 0.15~1.0MPa, Single-acting: 0.2~1.0MPa | ||||||||||
| Presión de prueba | 1.5MPa | ||||||||||
| Speed Range | Double-acting: 30~500mm/s, Single-acting: 50~500mm/s | ||||||||||
| Buffer Type | Anti-collision pad | ||||||||||
| Piston Rod Diameter mm | 6 | 6 | 8 | 10 | 12 | 16 | 20 | 20 | 25 | 32 | |
| Hilo del puerto | M5*0.8 | M5*0.8 | M5*0.8 | M5*0.8 | PT1/8 | PT1/8 | PT1/4 | PT1/4 | PT3/8 | PT3/8 | |
| Note: Port thread optional PT thread, G thread, NPT thread. Please contact us for other special strokes. | |||||||||||
| Bore (Inner Diameter mm) | 12 | 16 | 20 | 25 | 32 | 40 | 50 | 63 | 80 | 100 | 125 | 140 | 160 | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Action Type | Single-acting extend type, Double-acting type, Single-acting retract type | |||||||||||||
| Working Medium | Air (Filtered with 40μm or finer filter) | |||||||||||||
| Temperatura de trabajo | -20~70°C | |||||||||||||
| Operating Pressure Range | Double-acting: 0.15~1.0MPa, Single-acting: 0.2~1.0MPa | |||||||||||||
| Presión de prueba | 1.5MPa | |||||||||||||
| Speed Range | Double-acting: 30~500mm/s, Single-acting: 50~500mm/s | |||||||||||||
| Buffer Type | Anti-collision pad | |||||||||||||
| Piston Rod Diameter mm | 6 | 8 | 10 | 12 | 16 | 16 | 20 | 20 | 25 | 32 | 32 | 32 | 40 | |
| Hilo del puerto | M5*0.8 | M5*0.8 | M5*0.8 | M5*0.8 | PT1/8 | PT1/8 | PT1/4 | PT1/4 | PT3/8 | PT3/8 | PT3/8 | PT3/8 | PT3/8 | |
| Note: Port thread optional PT thread, G thread, NPT thread. Please contact us for other special strokes. | ||||||||||||||
Código del pedido actual:
Note:
1. Stroke auto filtered according to standard catalog; ASQ/ATQ cannot use long stroke L; BG option is disabled when bore＜125; Magnet S only available for models with built-in magnet ring; TACQ has no mounting options; Adjustable Stroke only active for ACQJ / ACQJ-BG / ACQJ-L.
2. ACQ-BG / ACQD-BG / ACQJ-BG = Large bore version; ACQ-L / ACQD-L / ACQJ-L = Long stroke version. No need to repeat BG/L in extra requirement.
▲ Para requisitos no estándar, ponte en contacto con nuestro personal de ventas.
| Bore (Inner Diameter mm) | 125 | 140 | 160 | 200 | 250 |
|---|---|---|---|---|---|
| Action Type | Double-acting type | ||||
| Working Medium | Air (Filtered with 40μm or finer filter) | ||||
| Temperatura de trabajo | -20~70°C | ||||
| Operating Pressure Range | Double-acting: 0.15~1.0MPa | ||||
| Presión de prueba | 1.5MPa | ||||
| Speed Range | Double-acting: 30~500mm/s | ||||
| Buffer Type | Anti-collision pad | ||||
| Piston Rod Diameter mm | 32 | 32 | 40 | 40 | 60 |
| Hilo del puerto | PT1/4 | PT1/4 | PT3/8 | PT1/2 | PT1/2 |
| Note: Port thread optional PT thread, G thread, NPT thread. Please contact us for other special strokes. | |||||
| Bore (Inner Diameter mm) | 12 | 16 | 20 | 25 | 32 | 40 | 50 | 63 | 80 | 100 |
|---|---|---|---|---|---|---|---|---|---|---|
| Action Type | Double-acting type, Single-acting extend type, Single-acting retract type | |||||||||
| Working Medium | Air (Filtered with 40μm or finer filter) | |||||||||
| Temperatura de trabajo | -20~70°C | |||||||||
| Operating Pressure Range | Double-acting: 0.15~1.0MPa, Single-acting: 0.2~1.0MPa | |||||||||
| Presión de prueba | 1.5MPa | |||||||||
| Speed Range | Double-acting: 30~500mm/s, Single-acting: 50~500mm/s | |||||||||
| Buffer Type | Anti-collision pad | |||||||||
| Piston Rod Diameter mm | 6 | 8 | 10 | 10 | 12 | 12 | 16 | 16 | 20 | 25 |
| Hilo del puerto | M5*0.8 | M5*0.8 | M5*0.8 | M5*0.8 | G1/8 | G1/8 | G1/8 | G1/8 | G1/8 | G1/4 |
| Note: Port thread optional PT thread, G thread, NPT thread. Please contact us for other special strokes. | ||||||||||
1. Complies with the ISO 21287 standard, ensuring high interchangeability of mounting dimensions;
2. The cylinder barrel is connected to the front and rear caps via threads, offering high strength and ease of maintenance;
3. The cylinder bore undergoes precision machining followed by hard-anodizing treatment, resulting in excellent wear resistance and durability;
4. The piston utilizes a specialized double-acting seal structure that is compact and features an oil-retention function;
5. The compact design effectively saves installation space; compared to ISO 15552 standard cylinders of the same bore size, it saves up to 50% of space;
6. Sensor slots are provided on three sides of the cylinder barrel, facilitating convenient sensor installation;
7. Built-in bumpers effectively absorb residual energy generated during high-speed operation and mechanical cycling;
8. A wide range of mounting accessories is available.
| Bore (Inner Diameter mm) | 12 | 16 | 20 | 25 | 32 | 40 | 50 | 63 | 80 | 100 | 125 |
|---|---|---|---|---|---|---|---|---|---|---|---|
| Action Type | Double-acting type, Single-acting extend type, Single-acting retract type | ||||||||||
| Working Medium | Air (Filtered with 40μm or finer filter) | ||||||||||
| Temperatura de trabajo | -20~70°C | ||||||||||
| Operating Pressure Range | Double-acting: 0.15~1.0MPa, Single-acting: 0.2~1.0MPa | ||||||||||
| Presión de prueba | 1.5MPa | ||||||||||
| Speed Range | Double-acting: 30~500mm/s, Single-acting: 50~500mm/s | ||||||||||
| Buffer Type | Anti-collision pad | ||||||||||
| Piston Rod Diameter mm | 6 | 8 | 10 | 10 | 12 | 12 | 16 | 16 | 20 | 20 | 25 |
| Hilo del puerto | M5*0.8 | M5*0.8 | M5*0.8 | M5*0.8 | PT1/8 | PT1/8 | PT1/8 | PT1/8 | PT1/8 | PT1/8 | PT1/4 |
| Note: Port thread optional PT thread, G thread, NPT thread. Please contact us for other special strokes. | |||||||||||
| Series | SDA |
| Características | Economical thin cylinder, domestic standard; low price, in stock; shape similar to ACQ but different flange thickness; only functional equivalent, cannot directly replace CQ2/ACQ |
| Series | ACT |
| Características | Old ultra-thin cylinder, discontinued; replaced by ACQ, not recommended for new projects |
| Series | ACQ |
| Características | JIS standard thin cylinder, widely used on market, compatible with CQ2B; rubber buffer, optional magnetic switch; most common for automation fixtures |
| Series | ACP |
| Características | Flat oval piston thin cylinder, flat structure, multi-side mounting; cannot replace standard square thin cylinder |
| Series | TACQ |
| Características | ACQ body + built-in guide rod, anti-rotation; can bear radial load; cannot replace standard single rod thin cylinder |
| Series | ACE |
| Características | ISO21287 standard thin cylinder, international standard, suitable for export equipment; not compatible with ACQ/JIS system |
| Series | TACE |
| Características | ACE body + built-in guide rod (ISO standard guided cylinder); independent system, not interchangeable with TACQ |
| Series | CQ2B |
| Características | JIS standard, internal thread piston rod; highly compatible and directly interchangeable with ACQ; high precision & long service life |
| Series | CQ2A |
| Características | JIS standard, external thread piston rod; rest same as CQ2B, interchangeable with ACQ |
| Series | RQB |
| Características | Upgraded CQ2 version, built-in air buffer; suitable for heavy impact working condition; interchangeable with CQ2B/A in same series |
| Series | CQMB |
| Características | CQ2 integrated guide rod cylinder, anti-rotation; cannot replace standard single rod thin cylinder |
| Series | MUB |
| Características | Flat thin cylinder, flat irregular shape; cannot replace standard square thin cylinder |
| Series | CQSB |
| Características | Simplified CQ2 version, no magnetic switch slot; cannot install magnetic ring, dimension close to CQ2B |
| Series | JCQ |
| Características | Thin cylinder with stroke adjustment mechanism; fine adjustable stroke; normal thin cylinder without this function |
| Series | C55 |
| Características | ISO21287 international standard thin cylinder; widely used for export equipment; not interchangeable with JIS CQ2/ACQ |
| Series | ADVU |
| Características | ISO21287 compact cylinder, high precision; interchangeable with C55, ACE under same standard; check drawing for detail differences |
| Series | ADN |
| Características | ISO15552 tie rod standard cylinder, NOT thin cylinder type; long barrel, cannot replace thin cylinder |
| Series | CDC |
| Características | Compact short-stroke small cylinder, dedicated for small bore; drawings must be checked before interchange |
| Series | ADVC |
| Características | Ultra-short stroke compact type; short body, only for short stroke positioning |
| Series | ADVUL |
| Características | ISO guided compact cylinder, anti rotation; cannot replace normal single rod thin cylinder |
| Series | DZF |
| Características | Flat rodless cylinder, no piston rod; special structure, fully incompatible with regular thin cylinder |
Las marcas mencionadas en este sitio web se citan únicamente a título de referencia en relación con las normas técnicas. Este producto no es un producto original de la marca en cuestión y no cuenta con la autorización de dicha marca. Se fabrica de acuerdo con las especificaciones técnicas de la marca correspondiente y presenta un aspecto similar; sin embargo, se trata de un producto desarrollado de forma independiente y no tiene ninguna relación con la marca en cuestión.
Bag feeding, sealing head, hopper gate, carton flap folding, discharge pusher
Workpiece positioning and clamping, lifting mechanisms for loading and unloading, stopping mechanisms, and component press-fitting.
Welding fixture positioning, workpiece clamping, and component transfer
Assembly line stoppers, sorting pushers, and pallet lifting units.
Machine tool door opening/closing, workpiece feeding, and scrap ejection.
Conveyor guide plate, simple hold-down device (stainless steel version available for humid environments)
MYFEQD offers a comprehensive range of Compact cylinders solutions.
Our pneumatic actuators comply with the technical standards of major global brands,
providing quick solutions for model selection across various industrial
pneumatic systems.
Compact thin cylinder features ultra-short axial body for limited mounting space. It can be mounted directly via front counter-sunk holes without extra brackets. It is designed for short-stroke clamping, ejecting and positioning, not suitable for long-stroke movement.
Standard stroke range: 5~100mm. Longer stroke can be customized. Note that longer stroke will reduce rod stability, not recommended.
Magnet inside the cylinder works with reed switch for position sensing. Reed switch is sold as separate accessory.
Theoretical force = piston area × air pressure. Actual output force is lower due to friction loss. Please keep safety margin during selection.
Working pressure: 0.1~1.0MPa. Pressure under 0.3MPa causes obvious force drop and slow movement. Recommended working pressure:0.4~0.7MPa.
Yes. Custom stroke, extended rod, male thread rod, special seals and modified mounting holes are available. OEM logo service is supported with MOQ requirement.
Standard seal: -20℃ ~ +80℃. FKM seal for high temperature up to 120℃ as customized option.
Yes, any mounting direction is allowed. For vertical upward pushing, please consider workpiece weight and select larger bore size.
Standard version is rubber bumper buffer for low speed and light load. CQ2 series optional air buffer for heavy impact.
Standard models in stock, ship within 1~3 days. Custom order:7~15 days. Samples available, freight negotiable.
12 months warranty under normal working condition. Damage caused by overpressure, corrosion or improper operation is excluded.
Fabricantes de neumáticos en China
