Productos

regulador de presión electrónico de la serie ITV

  • Stepless, continuous pressure regulation—not limited to a few fixed settings; pressure can be adjusted at any time via the program.
  •  Closed-loop feedback ensures stable pressure, high repeatability, and minimal hysteresis.
  • Integrated digital display; supports setting upper and lower limits, as well as fault alarms.
  • Automatic output pressure compensation to account for fluctuations in the air supply.

Compártelo con tus amigos:


ArtículoDescripción
Presión mínima de alimentaciónPresión ajustada + 0,1 MPa
Presión máxima de alimentación1,0 MPa
Rango de presión ajustado0.005~0.9 MPa
Power SupplyTensiónDC24V ±10%   DC12-15V
Consumo de corrienteDC24V type: 0.12A max.   DC12-15V type: 0.18A max.
Input SignalCurrent TypeDC4-20mA, DC0-20mA (Sink type)
Voltage TypeDC0-5V, DC0-10V
Input ImpedanceSet Input2500Ω max.
Voltage TypeApprox. 16.5 KΩ
Output Signal (Monitor)Set InputDC24V type: approx. 4.7 KΩ   DC12V type: approx. 2.0 KΩ
Analog OutputDC1-5V (load impedance: 1KΩ min.), DC4-20mA (sink type, load impedance: 250Ω max.), output accuracy: ±6% F.S max.
Salida del interruptorNPN open collector: 80mA max.   PNP open collector: 80mA max.
Linealidad±1% F.S max.
Hysteresis0.5% F.S max.
Repeatability±0.5% F.S max.
Sensibilidad0.2% F.S max.
Características de temperatura±0.12% F.S/°C max.
Pressure DisplayAccuracy±3% F.S, ±1 digit
Min. UnitMPa: 0.001, kgf/cm²: 0.01, bar: 0.01, psi: 0.1, kPa: 1
Temperatura ambiente y del fluido0~50°C
Estructura de protecciónIP65
Notas:
1. Max. set pressure varies depending on pressure display.
2. Type DC24-20mA cannot be used. Required power supply voltage: DC24V or DC12-15V.
3. Either analog output or switch output can be selected. Also, either NPN or PNP switch output can be selected.
4. Zero / span adjustment and preset settings are made from the output pressure display minimum unit setting. (0.01~0.50 MPa). Unit cannot be switched.
5. 0.9 MPa (130 psi) type, minimum unit: 1 psi.
6. Excluding current loop state. With current loop, input impedance changes. Input current DC20mA case: within 350Ω.
7. Above characteristics are static; pressure may fluctuate under flow.
8. Standard specification: maximum current consumption: 0.16A max.
9. For threaded specification: weight increases by approx. 80g (PRPFIBUS DP flange type: 100g).
10. ITV1000 series: non-lubricated grease (flow section).



ITV Series Electronic Pressure Regulator Order Code Generator

Código del pedido actual:
ITV2090-312L5

Notas:
1. Code format: ITV{model}0{pressure}{power}-{input}{monitor}{thread}{port}{bracket}{cable}{unit}; blank segments are omitted. Position 3 is a fixed “0” (no dropdown).
2. Model: 1=1000, 2=2000, 3=3000. Pressure: 1=0.1MPa, 5=0.5MPa, 9=0.9MPa. Power: 0=DC24V, 1=DC12-15V.
3. Input: 0=4-20mA sinking, 1=0-20mA sinking, 2=0-5V, 3=0-10V. Monitor: 1=1-5V, 2=NPN, 3=PNP, 4=4-20mA sinking. Thread: blank=RC, N=NPT, T=PT, F=G.
4. Port by model: 1000 → 1(1/8)/2(1/4); 2000 → 2(1/4)/3(3/8); 3000 → 2(1/4)/3(3/8)/4(1/2).
5. Bracket: B=flat, C=L-type. Cable: S=straight 3m, L=right-angle 3m, N=no cable. Unit: blank=MPa, 2=kgf/cm², 3=bar, 4=psi, 5=kPa.
▲ Para opciones no estándar o requisitos especiales, ponte en contacto con el departamento de ventas.

Logotipo MYFEQD NEW2

Envíanos un mensaje

Fabricantes de neumáticos en China