Products

solenoid valve 2W series

  • High Versatility: The valve body is primarily made of brass, with NBR as the standard sealing material (EPDM and Viton are also available as options). It is compatible with cold water, hot water, air, and low-pressure oil.
  • Semi-Direct Acting Structure: Allows for the operation of large-bore valves using a small solenoid coil, resulting in low power consumption. It supports zero-differential pressure startup, making it suitable for gravity-fed or low-pressure water supply systems (unlike some pilot-operated valves, which may require a minimum pressure differential of 0.05 MPa).
  • Stable and Durable: Features a diaphragm seal that ensures excellent sealing performance with minimal leakage. The solenoid coil is encapsulated in plastic, providing protection against dust and moisture—ideal for water treatment and water supply equipment.
  • Flexible Configuration: Options include manual overrides and explosion-proof coils. The standard operating temperature range for media is -10°C to 80°C; switching to EPDM seals allows for use with higher-temperature hot water.
  • Excellent Cost-Performance Ratio: As a standardized, widely used model, it is readily available in stock and easy to replace. It is a common choice for applications such as water purification systems, car wash equipment, irrigation, cooling towers, and automated water supply systems.

Share with friends:


2/2 Way Direct Acting Solenoid Valve
FluidGas / Steam
ActuationDirect acting
TypeNormally closed (NC) standard; Normally open (NO) optional
Cv Value0.25:0.23, 040:0.6, 160:4.8, 200:7.6, 250:12, 350:24, 400:29, 500:48
Fluid Viscosity200 SUS (below)
Compatible FluidsWater, Air, Oil, Gas
Proof Pressure10.5 MPa
Ambient Temperature5~80°C
Voltage Tolerance±10%
Seal MaterialNBR, EPDM or VITON
Body MaterialBrass



2W Series Solenoid Valve Order Code Generator

Current Order Code:
2W025-06-DC24V
2W
2
025
3
06
4
–
5
DC24V
6
–





Notes:
1. Orifice: 025=2.5mm, 040=4mm, 160=16mm, 200=20mm, 250=25mm, 350=35mm, 400=40mm, 500=50mm.
2. Port: 06=1/8, 08=1/4, 10=3/8, 15=1/2, 20=3/4, 25=1″, 35=1-1/4″, 40=1-1/2″, 50=2″. Port auto-matches orifice selection.
3. Type: blank=NC (normally closed), NO=normally open.
4. Form: blank=lead wire iron shell, O=terminal box, N=explosion-proof, E=waterproof, H=high temp, J=energy saving.

MYFEQD Logo NEW2

Send us a message

Pneumatic Manufacturers in China