Manifold Plug

Pneumatic plugs—also known as blanking plugs or threaded plugs—are used to seal unused threaded ports in pneumatic circuits, such as those found on manifold blocks, valves, cylinders, or fittings, and to seal off air supply ports.

Поделитесь с друзьями:

Manifold Plug is a sealing fitting for pneumatic systems. It is screwed by its external thread into an unused threaded hole and seals through the end face or tapered surface to close the air path and block off unused outlet / inlet ports. It is available in brass, steel and 304 stainless steel, and in socket head (tightened with an Allen / hex key), hex head (tightened with an open-end wrench) and small socket head types.

The external thread (G / PT) of the plug is screwed into the internal threaded hole: a tapered thread seals by compression on the tapered thread surface, while a flat-end plug seals together with a sealing ring. Once tightened, it isolates the internal and external air paths so compressed air cannot leak from the port. Socket-head types use an Allen wrench and hex-head types an open-end wrench.

Характеристики

Blocks redundant threaded holes to prevent air leakage; unified specifications match the threads of pneumatic components; different materials suit dry, damp, corrosive and export equipment; the small socket head is dedicated to narrow mounting spaces; the hex head suits high-torque wrench tightening.

For reserved threaded holes in an air path that need no air supply after commissioning, and for blocking to prevent leakage and dust. Choose the material by working condition: steel for low-cost dry use; brass for rust prevention on ordinary export equipment; 304 stainless steel for damp / salt-spray / copper-free conditions; the small socket head for narrow spaces; and the hex head for high-torque tightening.

Широкий спектр применения

Automation equipment factories, pneumatic integrators, manifold block manufacturers, solenoid valve assembly plants, foreign trade pneumatic traders, machine tools and packaging machinery manufacturers.

Redundant holes in solenoid valve manifold blocks, spare threaded ports of cylinders, extra ports of filter regulators, unused threaded holes of pneumatic fittings, and reserved holes in air circuit boards.


Series Specification Comparison

ИмяMaterialТипПреимуществаLimitations
Brass Inner Hex PlugNickel-plated BrassStandard Inner HexGood rust resistance, wide applicability, preferred for export equipmentContains copper; not usable in copper-prohibited lithium battery / semiconductor conditions; price higher than iron
Iron Inner Hex PlugNickel-plated IronStandard Inner HexLowest price, strong cost advantage for mass assemblyProne to rust in humid environments; unsuitable for water-vapor and salt-spray conditions
Compact Iron Small Inner Hex PlugNickel-plated IronLow Profile Small Inner HexUltra-thin head, saves space in dense manifold holes, low costThin head cannot take high torque; easy to strip threads and rust
Iron Outer Hex PlugNickel-plated IronOuter HexWithstands high torque, reliable high-pressure sealing, not easy to slipSide projection takes up space; prone to rust in humidity; easy to scratch cables
SUS304 Inner Hex PlugSUS304 Stainless SteelStandard Inner HexSalt-spray and weak acid / alkali resistant, no copper release, washableHigh unit price; stainless threads tend to seize; thread sealant recommended
Compact SUS304 Small Inner Hex PlugSUS304 Stainless SteelLow Profile Small Inner HexCorrosion resistant and space-saving; dedicated to compact manifolds, copper-freeThin-head torque limited; easy to strip; high cost
SUS304 Outer Hex PlugSUS304Outer HexCopper-free corrosion resistance; supports high-torque tightening; stable high-pressure sealingLarge size and side projection; expensive; threads easy to seize



Manifold Plug Order Code Generator

Код текущего заказа:
BBD-01
1
BBD
2
01


Примечания:
1. Spec: BBD brass, IBD iron, IBDG iron small hex socket, XIBD external hex iron, SBD stainless, SBDG stainless small hex socket, XSBD stainless external hex.
2. Thread sizes: PT1/8, PT1/4, PT3/8, PT1/2, PT3/4, PT1. For other requirements, please contact us for consultation.

Логотип MYFEQD NEW2

Отправить нам сообщение

Производители пневматики в Китае