Features a flat, compact design with an ultra-thin cylinder body, making it suitable for equipment with limited installation space; allows for direct mounting via countersunk screws on the end face—eliminating the need for additional brackets—for convenient installation.
20 лет опыта работы в обрабатывающей промышленности, предоставление индивидуальных решений, разработанных с учётом ваших конкретных технических требований и производственных нужд.
Более 20 лет опытаКачество нашей продукции не уступает качеству продукции крупнейших брендов, поскольку мы строго соблюдаем технические стандарты ведущих отечественных и международных брендов.
Качество в соответствии с требованиями ISOНаша компания, расположенная в городе Люши, уезде Юэцин, городе Вэньчжоу, провинции Чжэцзян, Китай, может похвастаться комплексной цепочкой поставок компонентов для продукции, современным высокотехнологичным оборудованием и многолетними традициями производства.
Цены напрямую от завода-изготовителяCompact thin air cylinders—also known as compact cylinders—are short-bodied,
double-acting cylinders characterized primarily by their short axial length and minimal installation space requirements;
they are the most commonly used actuators for confined workstations in automated tooling.
| Bore (Inner Diameter mm) | 12 | 16 | 20 | 25 | 32 | 40 | 50 | 63 | 80 | 100 | |
|---|---|---|---|---|---|---|---|---|---|---|---|
| Action Type | Single-acting extend type, Double-acting type, Single-acting retract type | ||||||||||
| Working Medium | Air (Filtered with 40μm or finer filter) | ||||||||||
| Рабочая температура | -20~70°C | ||||||||||
| Operating Pressure Range | Double-acting: 0.15~1.0MPa, Single-acting: 0.2~1.0MPa | ||||||||||
| Proof Pressure | 1.5MPa | ||||||||||
| Speed Range | Double-acting: 30~500mm/s, Single-acting: 50~500mm/s | ||||||||||
| Buffer Type | Anti-collision pad | ||||||||||
| Piston Rod Diameter mm | 6 | 6 | 8 | 10 | 12 | 16 | 20 | 20 | 25 | 32 | |
| Поток порта | M5*0.8 | M5*0.8 | M5*0.8 | M5*0.8 | PT1/8 | PT1/8 | PT1/4 | PT1/4 | PT3/8 | PT3/8 | |
| Note: Port thread optional PT thread, G thread, NPT thread. Please contact us for other special strokes. | |||||||||||
| Bore (Inner Diameter mm) | 12 | 16 | 20 | 25 | 32 | 40 | 50 | 63 | 80 | 100 | 125 | 140 | 160 | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Action Type | Single-acting extend type, Double-acting type, Single-acting retract type | |||||||||||||
| Working Medium | Air (Filtered with 40μm or finer filter) | |||||||||||||
| Рабочая температура | -20~70°C | |||||||||||||
| Operating Pressure Range | Double-acting: 0.15~1.0MPa, Single-acting: 0.2~1.0MPa | |||||||||||||
| Proof Pressure | 1.5MPa | |||||||||||||
| Speed Range | Double-acting: 30~500mm/s, Single-acting: 50~500mm/s | |||||||||||||
| Buffer Type | Anti-collision pad | |||||||||||||
| Piston Rod Diameter mm | 6 | 8 | 10 | 12 | 16 | 16 | 20 | 20 | 25 | 32 | 32 | 32 | 40 | |
| Поток порта | M5*0.8 | M5*0.8 | M5*0.8 | M5*0.8 | PT1/8 | PT1/8 | PT1/4 | PT1/4 | PT3/8 | PT3/8 | PT3/8 | PT3/8 | PT3/8 | |
| Note: Port thread optional PT thread, G thread, NPT thread. Please contact us for other special strokes. | ||||||||||||||
Код текущего заказа:
Note:
1. Stroke auto filtered according to standard catalog; ASQ/ATQ cannot use long stroke L; BG option is disabled when bore＜125; Magnet S only available for models with built-in magnet ring; TACQ has no mounting options; Adjustable Stroke only active for ACQJ / ACQJ-BG / ACQJ-L.
2. ACQ-BG / ACQD-BG / ACQJ-BG = Large bore version; ACQ-L / ACQD-L / ACQJ-L = Long stroke version. No need to repeat BG/L in extra requirement.
▲ По вопросам нестандартных требований просим обращаться к нашим специалистам по продажам.
| Bore (Inner Diameter mm) | 125 | 140 | 160 | 200 | 250 |
|---|---|---|---|---|---|
| Action Type | Double-acting type | ||||
| Working Medium | Air (Filtered with 40μm or finer filter) | ||||
| Рабочая температура | -20~70°C | ||||
| Operating Pressure Range | Double-acting: 0.15~1.0MPa | ||||
| Proof Pressure | 1.5MPa | ||||
| Speed Range | Double-acting: 30~500mm/s | ||||
| Buffer Type | Anti-collision pad | ||||
| Piston Rod Diameter mm | 32 | 32 | 40 | 40 | 60 |
| Поток порта | PT1/4 | PT1/4 | PT3/8 | PT1/2 | PT1/2 |
| Note: Port thread optional PT thread, G thread, NPT thread. Please contact us for other special strokes. | |||||
| Bore (Inner Diameter mm) | 12 | 16 | 20 | 25 | 32 | 40 | 50 | 63 | 80 | 100 |
|---|---|---|---|---|---|---|---|---|---|---|
| Action Type | Double-acting type, Single-acting extend type, Single-acting retract type | |||||||||
| Working Medium | Air (Filtered with 40μm or finer filter) | |||||||||
| Рабочая температура | -20~70°C | |||||||||
| Operating Pressure Range | Double-acting: 0.15~1.0MPa, Single-acting: 0.2~1.0MPa | |||||||||
| Proof Pressure | 1.5MPa | |||||||||
| Speed Range | Double-acting: 30~500mm/s, Single-acting: 50~500mm/s | |||||||||
| Buffer Type | Anti-collision pad | |||||||||
| Piston Rod Diameter mm | 6 | 8 | 10 | 10 | 12 | 12 | 16 | 16 | 20 | 25 |
| Поток порта | M5*0.8 | M5*0.8 | M5*0.8 | M5*0.8 | G1/8 | G1/8 | G1/8 | G1/8 | G1/8 | G1/4 |
| Note: Port thread optional PT thread, G thread, NPT thread. Please contact us for other special strokes. | ||||||||||
1. Complies with the ISO 21287 standard, ensuring high interchangeability of mounting dimensions;
2. The cylinder barrel is connected to the front and rear caps via threads, offering high strength and ease of maintenance;
3. The cylinder bore undergoes precision machining followed by hard-anodizing treatment, resulting in excellent wear resistance and durability;
4. The piston utilizes a specialized double-acting seal structure that is compact and features an oil-retention function;
5. The compact design effectively saves installation space; compared to ISO 15552 standard cylinders of the same bore size, it saves up to 50% of space;
6. Sensor slots are provided on three sides of the cylinder barrel, facilitating convenient sensor installation;
7. Built-in bumpers effectively absorb residual energy generated during high-speed operation and mechanical cycling;
8. A wide range of mounting accessories is available.
| Bore (Inner Diameter mm) | 12 | 16 | 20 | 25 | 32 | 40 | 50 | 63 | 80 | 100 | 125 |
|---|---|---|---|---|---|---|---|---|---|---|---|
| Action Type | Double-acting type, Single-acting extend type, Single-acting retract type | ||||||||||
| Working Medium | Air (Filtered with 40μm or finer filter) | ||||||||||
| Рабочая температура | -20~70°C | ||||||||||
| Operating Pressure Range | Double-acting: 0.15~1.0MPa, Single-acting: 0.2~1.0MPa | ||||||||||
| Proof Pressure | 1.5MPa | ||||||||||
| Speed Range | Double-acting: 30~500mm/s, Single-acting: 50~500mm/s | ||||||||||
| Buffer Type | Anti-collision pad | ||||||||||
| Piston Rod Diameter mm | 6 | 8 | 10 | 10 | 12 | 12 | 16 | 16 | 20 | 20 | 25 |
| Поток порта | M5*0.8 | M5*0.8 | M5*0.8 | M5*0.8 | PT1/8 | PT1/8 | PT1/8 | PT1/8 | PT1/8 | PT1/8 | PT1/4 |
| Note: Port thread optional PT thread, G thread, NPT thread. Please contact us for other special strokes. | |||||||||||
| Series | SDA |
| Характеристики | Economical thin cylinder, domestic standard; low price, in stock; shape similar to ACQ but different flange thickness; only functional equivalent, cannot directly replace CQ2/ACQ |
| Series | ACT |
| Характеристики | Old ultra-thin cylinder, discontinued; replaced by ACQ, not recommended for new projects |
| Series | ACQ |
| Характеристики | JIS standard thin cylinder, widely used on market, compatible with CQ2B; rubber buffer, optional magnetic switch; most common for automation fixtures |
| Series | ACP |
| Характеристики | Flat oval piston thin cylinder, flat structure, multi-side mounting; cannot replace standard square thin cylinder |
| Series | TACQ |
| Характеристики | ACQ body + built-in guide rod, anti-rotation; can bear radial load; cannot replace standard single rod thin cylinder |
| Series | ACE |
| Характеристики | ISO21287 standard thin cylinder, international standard, suitable for export equipment; not compatible with ACQ/JIS system |
| Series | TACE |
| Характеристики | ACE body + built-in guide rod (ISO standard guided cylinder); independent system, not interchangeable with TACQ |
| Series | CQ2B |
| Характеристики | JIS standard, internal thread piston rod; highly compatible and directly interchangeable with ACQ; high precision & long service life |
| Series | CQ2A |
| Характеристики | JIS standard, external thread piston rod; rest same as CQ2B, interchangeable with ACQ |
| Series | RQB |
| Характеристики | Upgraded CQ2 version, built-in air buffer; suitable for heavy impact working condition; interchangeable with CQ2B/A in same series |
| Series | CQMB |
| Характеристики | CQ2 integrated guide rod cylinder, anti-rotation; cannot replace standard single rod thin cylinder |
| Series | MUB |
| Характеристики | Flat thin cylinder, flat irregular shape; cannot replace standard square thin cylinder |
| Series | CQSB |
| Характеристики | Simplified CQ2 version, no magnetic switch slot; cannot install magnetic ring, dimension close to CQ2B |
| Series | JCQ |
| Характеристики | Thin cylinder with stroke adjustment mechanism; fine adjustable stroke; normal thin cylinder without this function |
| Series | C55 |
| Характеристики | ISO21287 international standard thin cylinder; widely used for export equipment; not interchangeable with JIS CQ2/ACQ |
| Series | ADVU |
| Характеристики | ISO21287 compact cylinder, high precision; interchangeable with C55, ACE under same standard; check drawing for detail differences |
| Series | ADN |
| Характеристики | ISO15552 tie rod standard cylinder, NOT thin cylinder type; long barrel, cannot replace thin cylinder |
| Series | CDC |
| Характеристики | Compact short-stroke small cylinder, dedicated for small bore; drawings must be checked before interchange |
| Series | ADVC |
| Характеристики | Ultra-short stroke compact type; short body, only for short stroke positioning |
| Series | ADVUL |
| Характеристики | ISO guided compact cylinder, anti rotation; cannot replace normal single rod thin cylinder |
| Series | DZF |
| Характеристики | Flat rodless cylinder, no piston rod; special structure, fully incompatible with regular thin cylinder |
Торговые марки, упомянутые на данном веб-сайте, приводятся исключительно в качестве ссылки на технические стандарты. Данный продукт не является оригинальным продуктом соответствующей торговой марки и не одобрен ею. Он изготовлен в соответствии с техническими спецификациями данной торговой марки и имеет схожий внешний вид; однако это продукт, разработанный независимо, и он не имеет никакого отношения к указанной торговой марке.
Устройство подачи пакетов, запаивающая головка, заслонка бункера, устройство складывания клапанов картонной упаковки, выталкиватель
Позиционирование и зажим заготовок, подъемные механизмы для загрузки и разгрузки, стопорные механизмы, а также прессовая посадка деталей.
Позиционирование сварочных приспособлений, зажим заготовок и перемещение деталей
Ограничители для конвейерных линий, сортировочные толкатели и устройства для подъема поддонов.
Открытие и закрытие дверей станка, подача заготовки и выброс отходов.
Направляющая пластина конвейера, простое прижимное устройство (доступна версия из нержавеющей стали для влажных сред)
MYFEQD предлагает широкий ассортимент Compact cylinders решения.
Наши пневматические приводы соответствуют техническим стандартам ведущих мировых брендов,
предоставление быстрых решений для выбора моделей в различных отраслях промышленности
пневматические системы.
Compact thin cylinder features ultra-short axial body for limited mounting space. It can be mounted directly via front counter-sunk holes without extra brackets. It is designed for short-stroke clamping, ejecting and positioning, not suitable for long-stroke movement.
Standard stroke range: 5~100mm. Longer stroke can be customized. Note that longer stroke will reduce rod stability, not recommended.
Magnet inside the cylinder works with reed switch for position sensing. Reed switch is sold as separate accessory.
Theoretical force = piston area × air pressure. Actual output force is lower due to friction loss. Please keep safety margin during selection.
Working pressure: 0.1~1.0MPa. Pressure under 0.3MPa causes obvious force drop and slow movement. Recommended working pressure:0.4~0.7MPa.
Yes. Custom stroke, extended rod, male thread rod, special seals and modified mounting holes are available. OEM logo service is supported with MOQ requirement.
Standard seal: -20℃ ~ +80℃. FKM seal for high temperature up to 120℃ as customized option.
Yes, any mounting direction is allowed. For vertical upward pushing, please consider workpiece weight and select larger bore size.
Standard version is rubber bumper buffer for low speed and light load. CQ2 series optional air buffer for heavy impact.
Standard models in stock, ship within 1~3 days. Custom order:7~15 days. Samples available, freight negotiable.
12 months warranty under normal working condition. Damage caused by overpressure, corrosion or improper operation is excluded.
Производители пневматики в Китае
