Alıntı
Key Features

Çift Çubuklu Silindir

1. Double the output force: For the same cylinder bore, the output thrust is approximately twice that of a single-rod cylinder, allowing for higher thrust in confined spaces.
2. Integrated guidance and anti-rotation: The dual-rod design constrains the load and prevents piston rod rotation; it withstands lateral forces and torsional loads, eliminating the need for external guide rails and simplifying the mechanism.
3. Compact structure with multi-face mounting holes: Mounting is possible on the bottom, sides, or front plate, offering flexible installation options and saving equipment space.
4. Built-in cushioning pads: These absorb impact at the end of the stroke.

Ürün bilgilerini görüntüle
Hemen Bilgi Alın ve Fiyat Teklifi Alın
Neden Bizi Tercih Etmelisiniz?

Üzerinde oluşturulmuştur hassasiyet,
avantajlı bir şekilde teslim edildi.

01

OEM / ODM

İmalat sektöründe 20 yıllık deneyimimizle, tam olarak sizin teknik şartnamelerinize ve üretim gereksinimlerinize uygun özel çözümler sunuyoruz.

20 yılı aşkın deneyim
02

Sıkı Teknik Standartlar

Önde gelen ulusal ve uluslararası markaların teknik standartlarına titizlikle uyduğumuzdan, sunduğumuz kalite büyük markaların kalitesiyle boy ölçüşebilmektedir.

ISO Standartlarına Uygun Kalite
03

Harika Fiyat

Çin’in Zhejiang Eyaleti, Wenzhou Şehri, Yueqing İlçesi, Liushi’de bulunan şirketimiz, kapsamlı bir ürün bileşenleri tedarik zincirine, gelişmiş ve üst düzey ekipmanlara ve köklü bir üretim geleneğine sahiptir.

Doğrudan Fabrika Fiyatlandırması
MYFEQD — Hassas Pnömatik Bileşenler

High output force

Twin Rod Cylinder: Basic Parameters for Selection

A dual-rod cylinder is a pneumatic actuator featuring two parallel piston rods that move in synchronization;

it is essentially the integration of two single-rod cylinders into a single aluminum alloy body.

Driven by compressed air, the two piston rods extend and retract together,

making this one of the most commonly used guided cylinders in automation.

TN Series Twin-Rod Cylinder

This enterprise standard

1. Complies with corporate standards;

2. Embedded body mounting design saves installation space;

3. Features resistance to bending and torsion, capable of withstanding certain lateral loads;

4. Mounting holes on three sides of the mounting plate facilitate multi-position loading;

5. A bumper at the front of the cylinder body allows for stroke adjustment and impact cushioning;

Hemen Bilgi Alın ve Fiyat Teklifi Alın
Delik Çapı (İç Çap, mm)1016202532
Eylem TürüÇift Etkili
Çalışma OrtamıHava (40 μm veya daha büyük gözenekli filtreden geçirilmiş)
Çalışma Sıcaklığı-20°C ~ +70°C
Çalışma Basıncı Aralığı0.2~1.0MPa0.15~1.0MPa
Test Basıncı1.5MPa
Çalışma Hızı Aralığı30~500mm/s
Adjustable Stroke (mm)-5 ~ 0
CushioningÇarpışma önleyici ped
Non-rotating Accuracy±0.4°±0.3°
Features1. Double piston rods; 2. Four-side fixture mounting; 3. Four-side fixing method
Piston Rod Shaft Dia. (mm)68101216
Liman KonusuM5×0.8PT1/8
TN Twin-Rod Cylinder Order Code Generator

TN Twin-Rod Cylinder Order Code Generator

Current Order Code:
TN20×50S
Notlar:
1. Series: TN twin-rod cylinder (double acting). All TN series are built with magnet (S); port thread is PT (blank).
2. Stroke options vary by bore; max stroke per the stroke table.
3. Sensors CMSG / DMSG / CS1-G / DS1-G available.
▲ For non-standard options or special requirements, please contact sales.

TR Series Twin-Rod Cylinder

Complies with JIS standards

1. Complies with JIS standards;

2. Features high non-rotating accuracy and minimal piston rod end deflection, making it suitable for precision guiding applications;

3. Utilizes an extended sliding bearing guide; it requires no additional lubrication and offers excellent guiding performance;

4. Mounting holes are provided on three sides of the mounting plate, facilitating multi-position mounting;

5. Offers resistance to bending and torsion, capable of withstanding certain lateral loads;

6. Mounting holes are available on all surfaces of the cylinder body (except the axial ends), offering customers a variety of mounting options;

7. Intake and exhaust ports are located on both sides of the cylinder body, allowing for flexible selection based on application needs;

8. A shock absorber at the front of the cylinder body allows for stroke adjustment and helps dampen impact.

Hemen Bilgi Alın ve Fiyat Teklifi Alın
Delik Çapı (İç Çap, mm)61016202532
Eylem TürüÇift Etkili
Çalışma OrtamıHava (40 μm veya daha büyük gözenekli filtreden geçirilmiş)
Çalışma Sıcaklığı-20°C ~ +70°C
Çalışma Basıncı Aralığı0.2~1.0MPa0.15~1.0MPa
Test Basıncı1.5MPa
Çalışma Hızı Aralığı30~500mm/s
Adjustable Stroke (mm)-5 ~ 0
CushioningÇarpışma önleyici ped
Non-rotating Accuracy±0.2°±0.15°±0.1°
Features1. Double piston rods; 2. Four-side fixture mounting; 3. Four-side fixing method
Piston Rod Shaft Dia. (mm)468101216
Liman KonusuM5×0.8PT1/8
TR Twin-Rod Cylinder Order Code Generator

TR Twin-Rod Cylinder Order Code Generator

Current Order Code:
TR20×50S
Notlar:
1. Series: TR twin-rod cylinder (double acting). All TR series are built with magnet (S).
2. Stroke options vary by bore; max stroke per the stroke table (bore 6 max 50, bore 10 max 100, others max 200).
3. Thread: blank = no code; PT = PT thread, G = G thread, T = NPT. When port thread is M5, this code is blank.
4. Sensors CMSG / DMSG / CS1-G / DS1-G available.
▲ For non-standard options or special requirements, please contact sales.

Twin Rod Cylinder Specifications

Comparison Table of Model Selection Differences

Twin-Rod / Dual-Piston Cylinder Series

5 groups · 13 series · Click a group to expand · Click a series to view Type / Key Features / Cross-Replacement

No matching series
Ürün bilgilerini görüntüle

Brand names mentioned on this website are cited solely for reference regarding technical standards. This product is not an original product from the respective brand and is not authorized by that brand. It is manufactured in accordance with the corresponding brand’s technical specifications and features a similar appearance; however, it is an independently developed product and has no affiliation with the brand in question.

Typical Applications

Twin Rod Cylinder are widely used.

Custom automation, tooling/fixtures, and assembly line equipment:

– Workpiece clamping, positioning, stopping, and pushing
– Fixture clamping, small slide unit actuation, and material lifting
– Packaging, electronics assembly, conveyor line stops, and simple stamping/holding operations

Linear push-pull

Jacking up

Clamp

Material stop

Material pushing / Feeding

Cylinder Applications

Packaging Machinery

Bag feeding, sealing head, hopper gate, carton flap folding, discharge pusher

Non-standard Automated Assembly Line

Workpiece positioning and clamping, lifting mechanisms for loading and unloading, stopping mechanisms, and component press-fitting.

Automotive assembly

Welding fixture positioning, workpiece clamping, and component transfer

Logistics Conveying Equipment

Assembly line stoppers, sorting pushers, and pallet lifting units.

General-purpose machinery

Machine tool door opening/closing, workpiece feeding, and scrap ejection.

Light Industry and Food Machinery

Conveyor guide plate, simple hold-down device (stainless steel version available for humid environments)

Key Information for Placing an Order

Twin Rod Cylinder: Frequently Asked Questions

MYFEQD offers a comprehensive range of Çift Çubuklu Silindir solutions.

Our pneumatic actuators comply with the technical standards of major global brands,

providing quick solutions for model selection across various industrial

pneumatic systems.

Model Selection & Technical Usage FAQ
Difference from a single-rod cylinder?

Anti-rotation, side-load capable; the double-piston version delivers about twice the thrust of a single rod at the same bore size.

CXS/CXSM/CXSL， TR/TN.

Choose bore by thrust with over 50% safety margin; choose stroke by travel distance, plus 5–10 mm at both ends.

Slide bearing : heavy load and impact; ball bearing : high speed, precision and frequency.

Flat mounting surface (flatness ≤0.05 mm); rods must not be twisted, forced or scratched.

Yes. Exhaust (meter-out) flow control is recommended for stable movement.

Standard models are pre-greased and non-lube; no extra oil is needed.

Check air pressure, solenoid valve signal, blocked air lines and jammed load.

FAQ Before Placing a Preliminary Order
Jerky or creeping movement?

Switch to meter-out control; check misalignment, overload and worn guides.

Rod leakage: replace rod seal /wiper; cover leakage: tighten screws or replace seals.

Check low pressure, internal piston-seal leakage and undersized bore.

Reduce speed; check cushioning, lubrication and bearing wear.

Series, bore, stroke, bearing type, magnet option, thread specs and special working conditions.

Yes. Vertical loads require a 3-position closed-center valve, drop-prevention valve or mechanical lock.

No. Both rods are fixed to one plate and move synchronously.

Retract the rods, apply anti-rust oil to exposed rods, seal ports and store in a dry, ventilated place.

MYFEQD Logosu YENİ2

Bize bir mesaj gönderin

Çin'deki Pnömatik Üreticileri