Alıntı
Core Advantages

Döner Silindir

1. High Cost-Effectiveness — Priced significantly lower than electric or hydraulic alternatives; features a simple structure, long service life, and requires no maintenance.
2. Safe, Explosion-Proof, and Suitable for Harsh Environments — Fully pneumatic and spark-free; explosion-proof, dust-resistant, and moisture-resistant; overload-proof (no risk of motor burnout).
3. Stable Torque, Rapid Response, and High Throughput — Delivers stable, precise output and crisp, decisive action, directly boosting production efficiency.

Ürün bilgilerini görüntüle
Hemen Bilgi Alın ve Fiyat Teklifi Alın
Neden Bizi Tercih Etmelisiniz?

Üzerinde oluşturulmuştur hassasiyet,
avantajlı bir şekilde teslim edildi.

01

OEM / ODM

İmalat sektöründe 20 yıllık deneyimimizle, tam olarak sizin teknik şartnamelerinize ve üretim gereksinimlerinize uygun özel çözümler sunuyoruz.

20 yılı aşkın deneyim
02

Sıkı Teknik Standartlar

Önde gelen ulusal ve uluslararası markaların teknik standartlarına titizlikle uyduğumuzdan, sunduğumuz kalite büyük markaların kalitesiyle boy ölçüşebilmektedir.

ISO Standartlarına Uygun Kalite
03

Harika Fiyat

Çin’in Zhejiang Eyaleti, Wenzhou Şehri, Yueqing İlçesi, Liushi’de bulunan şirketimiz, kapsamlı bir ürün bileşenleri tedarik zincirine, gelişmiş ve üst düzey ekipmanlara ve köklü bir üretim geleneğine sahiptir.

Doğrudan Fabrika Fiyatlandırması
MYFEQD — Hassas Pnömatik Bileşenler

High output force

Rotary Cylinder: Basic Parameters for Selection

A rotary cylinder is a pneumatic actuator that converts the pressure energy of compressed air into the rotary or oscillating motion of an output shaft.

Unlike standard linear cylinders—which only perform linear extension and retraction—this type of cylinder produces rotary output.

It is commonly used in automation equipment for tasks requiring actions such as rotating through an angle, flipping over, or clamping followed by tightening.

HRS serisi Döner tabla silindiri

HRS Series Rotary Cylinder

Ultra-thin rotary type

1. Rack-and-pinion structure ensures smooth operation;

2. Dual-cylinder design enables double the output force;

3. Positioning holes on both sides of the cylinder body facilitate convenient installation and use;

4. Features both pad cushioning and air cushioning for superior buffering performance.

Note: Models HRS10/15 feature only pad cushioning; they do not have air cushioning.

Hemen Bilgi Alın ve Fiyat Teklifi Alın
Delik Çapı (İç Çap, mm)1015203040
Eylem TürüÇift Etkili
Çalışma OrtamıHava (40 μm veya daha büyük gözenekli filtreden geçirilmiş)
Çalışma Sıcaklığı-20°C ~ +70°C
Çalışma Basıncı Aralığı0.25~0.7MPa0.15~0.7MPa
Test Basıncı1.2MPa
Rotary Angle Range0° ~ 190°
Tekrarlanabilirlik0.2°
CushioningCushion padCushion pad + Air cushion
Features1. Gear-and-rack structure; 2. Dual-cylinder structure for doubled output force
Liman KonusuM5×0.8M5×0.8PT1/8PT1/8PT1/8
HRS Compact Rotary Cylinder Order Code Generator

HRS Compact Rotary Cylinder Order Code Generator

Current Order Code:
HRS20X90
Notlar:
1. Series: HRS compact rotary cylinder. All series are built with magnet.
2. Swing angle: 90° or 180°.
3. Thread: no thread code for bore 10 / 15; for bore 20 / 30 / 40: blank = PT, G = G thread, T = NPT.
4. Sensors CMSG / DMSG / EMSG / CMSJ / DMSJ available.
▲ For non-standard options or special requirements, please contact sales.
HRQ serisi pnömatik döner silindir

HRQ Series Rotary Cylinder

Ultra-thin rotary type

1. Rack-and-pinion structure ensures smooth operation;
2. Dual-cylinder design enables double the output force;
3. High-precision machining of the work table allows for easy load mounting and accurate positioning;
4. A through-hole in the center of the work table facilitates piping connections;
5. Positioning holes are provided on both sides (sizes 10–200) or the bottom (sizes 2–7) of the cylinder body, ensuring convenient installation;
6. Two cushioning options are available: fixed cushioning via adjustment screws or hydraulic shock absorbers. Hydraulic shock absorbers offer 3 to 5 times the maximum cushioning energy of fixed adjustment screws, providing superior cushioning performance.
Note: Models HRQ2, HRQ3, and HRQ7 feature only the fixed cushioning method (via adjustment screws) and do not support hydraulic shock absorbers.

Hemen Bilgi Alın ve Fiyat Teklifi Alın
Size2371020305070100200
Eylem TürüÇift Etkili
Çalışma OrtamıHava (40 μm veya daha büyük gözenekli filtreden geçirilmiş)
Çalışma Sıcaklığı-20°C ~ +70°C
Operating Pressure (with adjusting screw)0.25~0.7MPa0.2~0.7MPa0.15~0.7MPa
Operating Pressure (with oil-pressure shock absorber)—0.15~0.7MPa
Test Basıncı1.2MPa
Rotary Angle Range0° ~ 190°
Repeatability (with adjusting screw)0.2°0.05°
Repeatability (with oil-pressure shock absorber)—0.05°
Cushioning (with adjusting screw)Cushion pad
Cushioning (with oil-pressure shock absorber)—Oil-pressure cushion
Features1. Gear-and-rack structure; 2. Dual-cylinder structure for doubled output force; 3. Multiple cushion types available
Port Thread (front)M5×0.8PT1/8
Port Thread (side)—M5×0.8
HRQ Rotary Actuator Order Code Generator

HRQ Rotary Actuator Order Code Generator

Current Order Code:
HRQ20
Notlar:
1. Series: HRQ rotary actuator. All series are built with magnet.
2. Cushion: blank = fixed cushion; A = oil shock absorber. Oil shock absorber (A) is available for size 10 / 20 / 30 / 50 / 70 / 100 / 200; size 2 / 3 / 7 has fixed cushion only.
3. Thread: no thread code for size 2 / 3 / 7 / 10 / 20; for size 30 / 50 / 70 / 100 / 200: blank = PT, G = G thread, T = NPT.
4. Sensors CMSG / DMSG / EMSG / CMSJ / DMSJ available.
▲ For non-standard options or special requirements, please contact sales.
ACK series Swing clamp cylinder 2

ACK Series Rotary Cylinder

Corner-mounted downward-pressing type

1. Seal materials ensure reliable cylinder performance under various operating conditions;

2. Triple-guide-slot structure provides high guiding precision;

3. Available in single-acting and double-acting (90°) configurations;

4. Rotation options include left-hand and right-hand rotation, as well as 90° and 180° angles;

5. The piston rod is made of special alloy steel and heat-treated to ensure a longer service life.

Hemen Bilgi Alın ve Fiyat Teklifi Alın
Inner Diameter (mm)2532405063
Eylem TürüÇift Etkili
Çalışma OrtamıHava (40 μm veya daha büyük gözenekli filtreden geçirilmiş)
Çalışma Sıcaklığı-20°C ~ +70°C
Çalışma Basıncı Aralığı0.15~1.0MPa
Test Basıncı1.5MPa
Çalışma Hızı Aralığı50~200mm/s
Rotary Stroke at 90° (mm)1414151515
Rotary Stroke at 180° (mm)2020212121
Gripping Stroke at 90° (mm)1212121414
Gripping Stroke at 180° (mm)66688
Total Stroke (mm)2626272929
Liman KonusuM5×0.8PT1/8
Note: For non-cushioned installation, add an exhaust throttle valve to achieve cushioning effect.
ACK Angle Cylinder Order Code Generator

ACK Angle Cylinder Order Code Generator

Current Order Code:
ACKL25×90
Notlar:
1. Series: ACK angle cylinder (double acting); ACKD angle cylinder (double clamp plate, 90° only).
2. Direction: L = press-down left-hand (counter-clockwise); R = press-down right-hand (clockwise).
3. Thread: blank = PT, G = G thread, N = NPT thread. When port thread is M5, this code is blank.
▲ For non-standard options or special requirements, please contact sales.
QCK series Swing clamp cylinder 2

QCK Series Rotary Cylinder

Rotary clamping type

1. Suitable for welding environments; the piston rod undergoes QPQ treatment, offering superior resistance to weld spatter adhesion compared to hard-chrome plated rods.
2. The front cover features a stainless steel wiper seal that is robust and durable, effectively protecting the cylinder against damage from dust and weld spatter—a more reliable solution than dust boots.
3. Body mounting dimensions and installation methods are identical to the ACQ series, allowing for the use of ACQ mounting accessories.

Hemen Bilgi Alın ve Fiyat Teklifi Alın
Inner Diameter (mm)1216202532405063
Eylem TürüÇift Etkili
Çalışma OrtamıHava (40 μm veya daha büyük gözenekli filtreden geçirilmiş)
Çalışma Sıcaklığı-20°C ~ +70°C
Çalışma Basıncı Aralığı0.2~1.0MPa0.15~1.0MPa
Test Basıncı1.5MPa
Çalışma Hızı Aralığı50~200mm/s
Rotary Angle90°
Tekrarlanabilirlik±2°
Rotary Stroke (mm)7.59.51519
CushioningÇarpışma önleyici ped
Features1. Dust and welding-spatter resistant; suitable for welding environments
Piston Rod Outer Dia. (mm)68121216162020
Liman KonusuM5×0.8M5×0.8M5×0.8M5×0.8PT1/8PT1/8PT1/4PT1/4
QCK Rotary Clamp Cylinder Order Code Generator

QCK Rotary Clamp Cylinder Order Code Generator

Current Order Code:
QCKL32×10S
Notlar:
1. Series: QCK rotary clamp cylinder. Built-in magnet (S).
2. Direction: L = left-hand (CCW); R = right-hand (CW).
3. Clamp stroke varies by bore; see options above.
4. Rod end: blank = taper type (with swing arm); M = flat type (without swing arm).
5. Mounting: blank = no accessory; FB = rear end cover flange plate.
6. Thread: blank = PT, G = G thread. When port thread is M5, this code is blank.
7. Sensors CMSG / EMSG / DMSG / CMSJ / DMSJ available.
▲ For non-standard options or special requirements, please contact sales.
QDK series Swing clamp cylinder 3

QDK Series Rotary Cylinder

Planar rotary clamping type

1. The rotary motion occurs at a constant vertical level (zero vertical travel), making it more suitable than the QCK series for space-constrained environments;

2. Flexible mounting options are available, with a choice between a front-cover boss type and a front-cover flat type;

3. Features a dual-pin rotary guide slot design, ensuring smooth operation and high repeatability;

4. Sensor mounting slots are integrated into all four sides of the cylinder body, eliminating the need for additional mounting accessories and offering greater convenience and flexibility.

Hemen Bilgi Alın ve Fiyat Teklifi Alın
Inner Diameter (mm)20253240
Eylem TürüÇift Etkili
Çalışma OrtamıHava (40 μm veya daha büyük gözenekli filtreden geçirilmiş)
Çalışma Sıcaklığı-20°C ~ +70°C
Çalışma Basıncı Aralığı0.15~1.0MPa
Test Basıncı1.5MPa
Rotary Angle90°
Tekrarlanabilirlik±2°
Rotary Stroke (mm)0° (Plane rotary)
CushioningÇarpışma önleyici ped
Piston Rod Outer Dia. (mm)12121216
Liman KonusuM5×0.8M5×0.8M5×0.8PT1/8
QDK Flat Rotary Clamp Cylinder Order Code Generator

QDK Flat Rotary Clamp Cylinder Order Code Generator

Current Order Code:
QDKL32×5S
Notlar:
1. Series: QDK flat rotary clamp cylinder. Clamp stroke fixed 5 mm; built-in magnet (S).
2. Direction: L = left-hand (CCW); R = right-hand (CW).
3. Front cover: blank = through-hole plate type; U = flat type.
4. Clamp arm: blank = none; JB = with clamp arm.
5. Thread: blank = PT, G = G thread. When port thread is M5, this code is blank.
6. Sensors CMSG / DMSG / EMSG / CMSJ / DMSJ available.
▲ For non-standard options or special requirements, please contact sales.

Rotary Cylinder Specifications

Comparison Table of Model Selection Differences

Pneumatic Rotary Actuator & Semi-Rotary Drive Series

7 groups · 24 series · Click a group to expand · Click a series to view Drive Type / Key Features / Cross-Replacement

No matching series
Ürün bilgilerini görüntüle

Brand names mentioned on this website are cited solely for reference regarding technical standards. This product is not an original product from the respective brand and is not authorized by that brand. It is manufactured in accordance with the corresponding brand’s technical specifications and features a similar appearance; however, it is an independently developed product and has no affiliation with the brand in question.

Key Features

Rotary Cylinder are widely used.

Material reorientation, flipping, and handling: assembly lines, loading and unloading
Clamping and positioning: machine tools, clamps, and fixtures
Valve actuation and indexing mechanisms: rotary indexing tables and turntables
Robotics / automated joints: end-effector rotation

Cylinder Applications

Packaging Machinery

Bag feeding, sealing head, hopper gate, carton flap folding, discharge pusher

Non-standard Automated Assembly Line

Workpiece positioning and clamping, lifting mechanisms for loading and unloading, stopping mechanisms, and component press-fitting.

Automotive assembly

Welding fixture positioning, workpiece clamping, and component transfer

Logistics Conveying Equipment

Assembly line stoppers, sorting pushers, and pallet lifting units.

General-purpose machinery

Machine tool door opening/closing, workpiece feeding, and scrap ejection.

Light Industry and Food Machinery

Conveyor guide plate, simple hold-down device (stainless steel version available for humid environments)

Key Information for Placing an Order

Rotary Cylinder: Frequently Asked Questions

MYFEQD offers a comprehensive range of Döner Silindir solutions.

Our pneumatic actuators comply with the technical standards of major global brands,

providing quick solutions for model selection across various industrial

pneumatic systems.

Model Selection & Technical Usage FAQ
Can it rotate continuously 360°?

No, only swing within preset angle. Choose air motor for endless rotation.

Equipped with adjustable stopper for fine angle tuning.

Yes, install flow control valve to adjust swing speed.

Overload torque, unclean compressed air, impact without buffer.

Not recommended. Extra support structure needed for heavy radial load.

Calculate load torque from workpiece weight & rotation radius, add safety margin (1.5~2 times).

Suitable for intermittent automation cycle; continuous high-frequency operation needs derating.

NBR nitrile rubber, for general air environment.

FAQ Before Placing a Preliminary Order
Can we customize the rotation angle?

Non-standard swing angle available, please send your requirement for quotation.

Positioning error increases, internal parts wear rapidly, even cause permanent damage.

Can be installed horizontally, vertically or upside down, keep load within specification.

Yes, use synchronous air circuit or proportional valve for synchronization control.

Align shaft concentricity, avoid forced assembly, reserve buffer space.

Double vane delivers higher torque within same size; single vane has larger swing angle range.

Heavy dust will accelerate seal wear, protective cover is recommended.

Pick rack-pinion for high precision; choose vane if compact dimension is priority.

MYFEQD Logosu YENİ2

Bize bir mesaj gönderin

Çin'deki Pnömatik Üreticileri