인용문
Core Advantages

회전 실린더

1. High Cost-Effectiveness — Priced significantly lower than electric or hydraulic alternatives; features a simple structure, long service life, and requires no maintenance.
2. Safe, Explosion-Proof, and Suitable for Harsh Environments — Fully pneumatic and spark-free; explosion-proof, dust-resistant, and moisture-resistant; overload-proof (no risk of motor burnout).
3. Stable Torque, Rapid Response, and High Throughput — Delivers stable, precise output and crisp, decisive action, directly boosting production efficiency.

제품 정보 보기
지금 문의하고 견적 받아보기
왜 저희를 선택해야 할까요?

기반이 된 정밀도,
효과적으로 전달되었다.

01

OEM / ODM

제조 업계에서 20년간의 경험을 바탕으로, 귀사의 정확한 사양과 생산 요구 사항에 맞춰 맞춤형 솔루션을 제공합니다.

20년 이상의 경력
02

엄격한 기술 표준

당사는 국내외 유수의 브랜드가 정한 기술 표준을 엄격히 준수하고 있으므로, 제공하는 제품의 품질은 주요 브랜드에 뒤지지 않습니다.

ISO 기준에 부합하는 품질
03

훌륭한 가격

중국 저장성 원저우시 웨칭구 류시에 위치한 당사는 포괄적인 제품 부품 공급망, 첨단 고성능 설비, 그리고 오랜 제조 전통을 자랑합니다.

공장 직판 가격
MYFEQD — 정밀 공압 부품

높은 출력 힘

Rotary Cylinder: Basic Parameters for Selection

A rotary cylinder is a pneumatic actuator that converts the pressure energy of compressed air into the rotary or oscillating motion of an output shaft.

Unlike standard linear cylinders—which only perform linear extension and retraction—this type of cylinder produces rotary output.

It is commonly used in automation equipment for tasks requiring actions such as rotating through an angle, flipping over, or clamping followed by tightening.

HRS 시리즈 회전 테이블 실린더

HRS Series Rotary Cylinder

Ultra-thin rotary type

1. Rack-and-pinion structure ensures smooth operation;

2. Dual-cylinder design enables double the output force;

3. Positioning holes on both sides of the cylinder body facilitate convenient installation and use;

4. Features both pad cushioning and air cushioning for superior buffering performance.

Note: Models HRS10/15 feature only pad cushioning; they do not have air cushioning.

지금 문의하고 견적 받아보기
Bore Size (Inner Diameter mm)1015203040
조치 유형Double Acting
작업 매체Air (filtered through 40μm or above filter)
작동 온도-20°C ~ +70°C
작동 압력 범위0.25~0.7MPa0.15~0.7MPa
시험 압력1.2MPa
Rotary Angle Range0° ~ 190°
재현성0.2°
CushioningCushion padCushion pad + Air cushion
Features1. Gear-and-rack structure; 2. Dual-cylinder structure for doubled output force
포트 스레드M5×0.8M5×0.8PT1/8PT1/8PT1/8
HRS Compact Rotary Cylinder Order Code Generator

HRS Compact Rotary Cylinder Order Code Generator

현재 주문 코드:
HRS20X90
Notes:
1. Series: HRS compact rotary cylinder. All series are built with magnet.
2. Swing angle: 90° or 180°.
3. Thread: no thread code for bore 10 / 15; for bore 20 / 30 / 40: blank = PT, G = G thread, T = NPT.
4. Sensors CMSG / DMSG / EMSG / CMSJ / DMSJ available.
▲ For non-standard options or special requirements, please contact sales.
HRQ 시리즈 공압식 회전 실린더

HRQ Series Rotary Cylinder

Ultra-thin rotary type

1. Rack-and-pinion structure ensures smooth operation;
2. Dual-cylinder design enables double the output force;
3. High-precision machining of the work table allows for easy load mounting and accurate positioning;
4. A through-hole in the center of the work table facilitates piping connections;
5. Positioning holes are provided on both sides (sizes 10–200) or the bottom (sizes 2–7) of the cylinder body, ensuring convenient installation;
6. Two cushioning options are available: fixed cushioning via adjustment screws or hydraulic shock absorbers. Hydraulic shock absorbers offer 3 to 5 times the maximum cushioning energy of fixed adjustment screws, providing superior cushioning performance.
Note: Models HRQ2, HRQ3, and HRQ7 feature only the fixed cushioning method (via adjustment screws) and do not support hydraulic shock absorbers.

지금 문의하고 견적 받아보기
Size2371020305070100200
조치 유형Double Acting
작업 매체Air (filtered through 40μm or above filter)
작동 온도-20°C ~ +70°C
Operating Pressure (with adjusting screw)0.25~0.7MPa0.2~0.7MPa0.15~0.7MPa
Operating Pressure (with oil-pressure shock absorber)—0.15~0.7MPa
시험 압력1.2MPa
Rotary Angle Range0° ~ 190°
Repeatability (with adjusting screw)0.2°0.05°
Repeatability (with oil-pressure shock absorber)—0.05°
Cushioning (with adjusting screw)Cushion pad
Cushioning (with oil-pressure shock absorber)—Oil-pressure cushion
Features1. Gear-and-rack structure; 2. Dual-cylinder structure for doubled output force; 3. Multiple cushion types available
Port Thread (front)M5×0.8PT1/8
Port Thread (side)—M5×0.8
HRQ Rotary Actuator Order Code Generator

HRQ Rotary Actuator Order Code Generator

현재 주문 코드:
HRQ20
Notes:
1. Series: HRQ rotary actuator. All series are built with magnet.
2. Cushion: blank = fixed cushion; A = oil shock absorber. Oil shock absorber (A) is available for size 10 / 20 / 30 / 50 / 70 / 100 / 200; size 2 / 3 / 7 has fixed cushion only.
3. Thread: no thread code for size 2 / 3 / 7 / 10 / 20; for size 30 / 50 / 70 / 100 / 200: blank = PT, G = G thread, T = NPT.
4. Sensors CMSG / DMSG / EMSG / CMSJ / DMSJ available.
▲ For non-standard options or special requirements, please contact sales.
ACK 시리즈 스윙 클램프 실린더 2

ACK Series Rotary Cylinder

Corner-mounted downward-pressing type

1. Seal materials ensure reliable cylinder performance under various operating conditions;

2. Triple-guide-slot structure provides high guiding precision;

3. Available in single-acting and double-acting (90°) configurations;

4. Rotation options include left-hand and right-hand rotation, as well as 90° and 180° angles;

5. The piston rod is made of special alloy steel and heat-treated to ensure a longer service life.

지금 문의하고 견적 받아보기
Inner Diameter (mm)2532405063
조치 유형Double Acting
작업 매체Air (filtered through 40μm or above filter)
작동 온도-20°C ~ +70°C
작동 압력 범위0.15~1.0MPa
시험 압력1.5MPa
Operating Speed Range50~200mm/s
Rotary Stroke at 90° (mm)1414151515
Rotary Stroke at 180° (mm)2020212121
Gripping Stroke at 90° (mm)1212121414
Gripping Stroke at 180° (mm)66688
Total Stroke (mm)2626272929
포트 스레드M5×0.8PT1/8
Note: For non-cushioned installation, add an exhaust throttle valve to achieve cushioning effect.
ACK Angle Cylinder Order Code Generator

ACK Angle Cylinder Order Code Generator

현재 주문 코드:
ACKL25×90
Notes:
1. Series: ACK angle cylinder (double acting); ACKD angle cylinder (double clamp plate, 90° only).
2. Direction: L = press-down left-hand (counter-clockwise); R = press-down right-hand (clockwise).
3. Thread: blank = PT, G = G thread, N = NPT thread. When port thread is M5, this code is blank.
▲ For non-standard options or special requirements, please contact sales.
QCK series Swing clamp cylinder 2

QCK Series Rotary Cylinder

Rotary clamping type

1. Suitable for welding environments; the piston rod undergoes QPQ treatment, offering superior resistance to weld spatter adhesion compared to hard-chrome plated rods.
2. The front cover features a stainless steel wiper seal that is robust and durable, effectively protecting the cylinder against damage from dust and weld spatter—a more reliable solution than dust boots.
3. Body mounting dimensions and installation methods are identical to the ACQ series, allowing for the use of ACQ mounting accessories.

지금 문의하고 견적 받아보기
Inner Diameter (mm)1216202532405063
조치 유형Double Acting
작업 매체Air (filtered through 40μm or above filter)
작동 온도-20°C ~ +70°C
작동 압력 범위0.2~1.0MPa0.15~1.0MPa
시험 압력1.5MPa
Operating Speed Range50~200mm/s
Rotary Angle90°
재현성±2°
Rotary Stroke (mm)7.59.51519
Cushioning충돌 방지 패드
Features1. Dust and welding-spatter resistant; suitable for welding environments
Piston Rod Outer Dia. (mm)68121216162020
포트 스레드M5×0.8M5×0.8M5×0.8M5×0.8PT1/8PT1/8PT1/4PT1/4
QCK Rotary Clamp Cylinder Order Code Generator

QCK Rotary Clamp Cylinder Order Code Generator

현재 주문 코드:
QCKL32×10S
Notes:
1. Series: QCK rotary clamp cylinder. Built-in magnet (S).
2. Direction: L = left-hand (CCW); R = right-hand (CW).
3. Clamp stroke varies by bore; see options above.
4. Rod end: blank = taper type (with swing arm); M = flat type (without swing arm).
5. Mounting: blank = no accessory; FB = rear end cover flange plate.
6. Thread: blank = PT, G = G thread. When port thread is M5, this code is blank.
7. Sensors CMSG / EMSG / DMSG / CMSJ / DMSJ available.
▲ For non-standard options or special requirements, please contact sales.
QDK series Swing clamp cylinder 3

QDK Series Rotary Cylinder

Planar rotary clamping type

1. The rotary motion occurs at a constant vertical level (zero vertical travel), making it more suitable than the QCK series for space-constrained environments;

2. Flexible mounting options are available, with a choice between a front-cover boss type and a front-cover flat type;

3. Features a dual-pin rotary guide slot design, ensuring smooth operation and high repeatability;

4. Sensor mounting slots are integrated into all four sides of the cylinder body, eliminating the need for additional mounting accessories and offering greater convenience and flexibility.

지금 문의하고 견적 받아보기
Inner Diameter (mm)20253240
조치 유형Double Acting
작업 매체Air (filtered through 40μm or above filter)
작동 온도-20°C ~ +70°C
작동 압력 범위0.15~1.0MPa
시험 압력1.5MPa
Rotary Angle90°
재현성±2°
Rotary Stroke (mm)0° (Plane rotary)
Cushioning충돌 방지 패드
Piston Rod Outer Dia. (mm)12121216
포트 스레드M5×0.8M5×0.8M5×0.8PT1/8
QDK Flat Rotary Clamp Cylinder Order Code Generator

QDK Flat Rotary Clamp Cylinder Order Code Generator

현재 주문 코드:
QDKL32×5S
Notes:
1. Series: QDK flat rotary clamp cylinder. Clamp stroke fixed 5 mm; built-in magnet (S).
2. Direction: L = left-hand (CCW); R = right-hand (CW).
3. Front cover: blank = through-hole plate type; U = flat type.
4. Clamp arm: blank = none; JB = with clamp arm.
5. Thread: blank = PT, G = G thread. When port thread is M5, this code is blank.
6. Sensors CMSG / DMSG / EMSG / CMSJ / DMSJ available.
▲ For non-standard options or special requirements, please contact sales.

Rotary Cylinder Specifications

Comparison Table of Model Selection Differences

Pneumatic Rotary Actuator & Semi-Rotary Drive Series

7 groups · 24 series · Click a group to expand · Click a series to view Drive Type / Key Features / Cross-Replacement

No matching series
제품 정보 보기

Brand names mentioned on this website are cited solely for reference regarding technical standards. This product is not an original product from the respective brand and is not authorized by that brand. It is manufactured in accordance with the corresponding brand’s technical specifications and features a similar appearance; however, it is an independently developed product and has no affiliation with the brand in question.

Key Features

Rotary Cylinder are widely used.

Material reorientation, flipping, and handling: assembly lines, loading and unloading
Clamping and positioning: machine tools, clamps, and fixtures
Valve actuation and indexing mechanisms: rotary indexing tables and turntables
Robotics / automated joints: end-effector rotation

Cylinder Applications

Packaging Machinery

Bag feeding, sealing head, hopper gate, carton flap folding, discharge pusher

Non-standard Automated Assembly Line

Workpiece positioning and clamping, lifting mechanisms for loading and unloading, stopping mechanisms, and component press-fitting.

Automotive assembly

Welding fixture positioning, workpiece clamping, and component transfer

Logistics Conveying Equipment

Assembly line stoppers, sorting pushers, and pallet lifting units.

General-purpose machinery

Machine tool door opening/closing, workpiece feeding, and scrap ejection.

Light Industry and Food Machinery

Conveyor guide plate, simple hold-down device (stainless steel version available for humid environments)

Key Information for Placing an Order

Rotary Cylinder: Frequently Asked Questions

MYFEQD offers a comprehensive range of 회전 실린더 solutions.

Our pneumatic actuators comply with the technical standards of major global brands,

providing quick solutions for model selection across various industrial

pneumatic systems.

Model Selection & Technical Usage FAQ
Can it rotate continuously 360°?

No, only swing within preset angle. Choose air motor for endless rotation.

Equipped with adjustable stopper for fine angle tuning.

Yes, install flow control valve to adjust swing speed.

Overload torque, unclean compressed air, impact without buffer.

Not recommended. Extra support structure needed for heavy radial load.

Calculate load torque from workpiece weight & rotation radius, add safety margin (1.5~2 times).

Suitable for intermittent automation cycle; continuous high-frequency operation needs derating.

NBR nitrile rubber, for general air environment.

FAQ Before Placing a Preliminary Order
Can we customize the rotation angle?

Non-standard swing angle available, please send your requirement for quotation.

Positioning error increases, internal parts wear rapidly, even cause permanent damage.

Can be installed horizontally, vertically or upside down, keep load within specification.

Yes, use synchronous air circuit or proportional valve for synchronization control.

Align shaft concentricity, avoid forced assembly, reserve buffer space.

Double vane delivers higher torque within same size; single vane has larger swing angle range.

Heavy dust will accelerate seal wear, protective cover is recommended.

Pick rack-pinion for high precision; choose vane if compact dimension is priority.

MYFEQD 로고 NEW2

메시지를 보내주세요

중국의 공압 장비 제조업체