슬라이드 실린더

High precision: Repeatability within ±0.05 mm.
High rigidity and resistance to side loads.
Non-rotating: No rod rotation during slide movement.
Compact and space-saving: Integrated cylinder, guide rail, and work platform.
Multi-directional mounting: Can be secured via the bottom, end face, or top of the slide block; suitable for compact equipment.
Adjustable stroke and smooth speed: Fine-tunable stroke at both ends; smooth motion without stick-slip at low speeds and rapid response at high speeds.

왜 저희를 선택해야 할까요?

기반이 된 정밀도,
효과적으로 전달되었다.

OEM / ODM

제조 업계에서 20년간의 경험을 바탕으로, 귀사의 정확한 사양과 생산 요구 사항에 맞춰 맞춤형 솔루션을 제공합니다.

20년 이상의 경력

엄격한 기술 표준

당사는 국내외 유수의 브랜드가 정한 기술 표준을 엄격히 준수하고 있으므로, 제공하는 제품의 품질은 주요 브랜드에 뒤지지 않습니다.

ISO 기준에 부합하는 품질

훌륭한 가격

중국 저장성 원저우시 웨칭구 류시에 위치한 당사는 포괄적인 제품 부품 공급망, 첨단 고성능 설비, 그리고 오랜 제조 전통을 자랑합니다.

공장 직판 가격

MYFEQD — 정밀 공압 부품

높은 출력 힘

Slide Cylinder: Basic Parameters for Selection

slide table cylinder—also known as a pneumatic slide table—is a linear pneumatic actuator that integrates a standard cylinder with a precision linear guide rail.

Driven by compressed air, the piston moves the upper work platform along the guide rail in a high-precision linear reciprocating motion;

it combines the functions of thrust output and linear guidance, eliminating the need for an external guide bracket.

HLS Series Slide Table Cylinder

Dual-Axis Precision Slide Table (Ball-Screw Type)

Cylinder Specification

Bore Size (Inner Diameter mm)	6	8	12	16	20	25
조치 유형	Double Acting
작업 매체	Air (filtered through 40μm or above filter)
작동 온도	-20°C ~ +70°C
작동 압력 범위	0.2~0.7MPa		0.15~0.7MPa
시험 압력	1.2MPa
Operating Speed Range	50~500mm/s
Cushioning	Fixed cushioning at both ends, with oil-pressure shock absorber
Piston Rod Dia. (mm)	3	4	6	8	10	12
Features	1. Cross roller guide; 2. Three-direction cylinder mounting; 3. Two-direction fixture mounting; 4. Floating joint design; 5. Double piston for double output force
포트 스레드	M5×0.8	M5×0.8	M5×0.8	M5×0.8	M5×0.8	PT1/8
Note	Port thread options include PT thread, G thread, NPT thread. Please contact us for other special stroke requirements.

HLS Precision Slide Cylinder Order Code Generator

현재 주문 코드:

HLS20×30

Series Code

1. Cylinder Bore (mm)

2. Stroke (mm)

3. Magnet Option

4. External Stopper Type

5. Thread Standard

6. Sensor Option

Notes:

1. Series: HLS standard (ball cage) / HLSL symmetric (ball cage).

2. Bore 6 has no hydraulic shock absorber type; B / BS / BF are disabled. M5 port bores (6/8/12) only PT thread; G / T are disabled.

3. Stopper: blank = no stopper (basic); A/AS/AF = stroke adjust bolt; B/BS/BF = hydraulic shock absorber.

4. Sensors CMSH / EMSH / DMSH require Magnet S (built-in ring); disabled and forced to None when no magnet.

▲ For non-standard strokes or special requirements, please contact sales.

HLQ Series Slide Table Cylinder

Twin-Rod Precision Slide Cylinder (Recirculating Ball Type)

Bore Size (Inner Diameter mm)	6	8	12	16	20	25
조치 유형	Double Acting
작업 매체	Air (filtered through 40μm or above filter)
작동 온도	-20°C ~ +70°C
작동 압력 범위	0.2~0.7MPa		0.15~0.7MPa
시험 압력	1.2MPa
Operating Speed Range	50~500mm/s
Cushioning	Fixed cushioning at both ends, with oil-pressure shock absorber
Piston Rod Dia. (mm)	3	4	6	8	10	12
Features	1. Precision linear guide; 2. Three-direction cylinder mounting; 3. Two-direction fixture mounting; 4. Floating joint design; 5. Double piston structure for double output force
포트 스레드	M5×0.8	M5×0.8	M5×0.8	M5×0.8	PT1/8	PT1/8
Note	Port thread options include PT thread, G thread, NPT thread. Please contact us for other special stroke requirements.

HLQ Precision Slide Cylinder Order Code Generator

현재 주문 코드:

HLQ20×30

Series Code

1. Cylinder Bore (mm)

2. Stroke (mm)

3. Magnet Option

4. External Stopper Type

5. Thread Standard

6. Sensor Option

Notes:

1. Series: HLQ standard (circular ball guide) / HLQL symmetric (circular ball guide).

2. Bore 6 has no hydraulic shock absorber type; B / BS / BF are disabled. M5 port bores (6/8/12) only PT thread; G / T are disabled.

3. Stopper: blank = no stopper (basic); A/AS/AF = stroke adjust bolt; B/BS/BF = hydraulic shock absorber.

4. Sensors CMSH / EMSH / DMSH require Magnet S (built-in ring); disabled and forced to None when no magnet.

▲ For non-standard strokes or special requirements, please contact sales.

HLH Series Slide Table Cylinder

Side-rail type precision slide table

Bore Size (Inner Diameter mm)	6	10	16	20
조치 유형	Double Acting
작업 매체	Air (filtered through 40μm or above filter)
작동 온도	-20°C ~ +70°C
작동 압력 범위	0.2~0.7MPa		0.15~0.7MPa
시험 압력	1.2MPa
Operating Speed Range	50~500mm/s
Cushioning	Fixed cushioning at both ends
Piston Rod Dia. (mm)	3	4	6	8
Features	1. Excellent straightness and non-rotation accuracy; 2. Four-direction cylinder mounting; 3. Two-direction fixture mounting; 4. Integrated micro recirculating ball bearing and linear guide; 5. Three-way port options on both side faces and rear
포트 스레드	M5×0.8	M5×0.8	M5×0.8	M5×0.8

HLH Side-rail Slide Cylinder Order Code Generator

HLH Side-rail Precision Slide Cylinder Order Code Generator

현재 주문 코드:

HLH20×30

Series Code

1. Cylinder Bore (mm)

2. Stroke (mm)

3. Magnet Option

4. Sensor Option

Notes:

1. Series: HLH side-rail type precision slide cylinder.

2. Available bores: 6 / 10 / 16 / 20 mm; stroke options vary by bore (max stroke 30 / 50 / 60 / 60 mm respectively).

3. Sensors CMSH / EMSH / DMSH require Magnet S (built-in ring); disabled and forced to None when no magnet.

▲ For non-standard strokes or special requirements, please contact sales.

HLF Series Slide Table Cylinder

Ultra-thin precision ball type

Bore Size (Inner Diameter mm)	8	12	16	20
조치 유형	Double Acting
작업 매체	Air (filtered through 40μm or above filter)
작동 온도	-20°C ~ +70°C
작동 압력 범위	0.2~0.7MPa	0.15~0.7MPa
시험 압력	1.2MPa
Operating Speed Range	50~500mm/s
Cushioning	Fixed cushioning at both ends
Piston Rod Dia. (mm)	3	4	6	8
Features	1. Excellent straightness and non-rotation accuracy; 2. Two-direction cylinder mounting; 3. Two-direction fixture mounting; 4. Integrated micro recirculating ball bearing and linear guide; 5. Two-way port options on side and rear
포트 스레드	M3×0.5	M5×0.8	M5×0.8	M5×0.8

HLF Ultra-thin Slide Cylinder Order Code Generator

HLF Ultra-thin Precision Slide Cylinder Order Code Generator

현재 주문 코드:

HLF20×30

Series Code

1. Cylinder Bore (mm)

2. Stroke (mm)

3. Magnet Option

4. Sensor Option

Notes:

1. Series: HLF ultra-thin type precision slide cylinder (ball cage).

2. Available bores: 8 / 12 / 16 / 20 mm; stroke options vary by bore (max stroke 30 / 50 / 100 / 100 mm respectively).

3. Sensors CMSH / EMSH / DMSH require Magnet S (built-in ring); disabled and forced to None when no magnet.

▲ For non-standard strokes or special requirements, please contact sales.

HGS Series Slide Table Cylinder

Miniature precision type

Cylinder Specification

Bore Size (Inner Diameter mm)	6	8	10	12
조치 유형	Double Acting
작업 매체	Air (filtered through 40μm or above filter)
작동 온도	-20°C ~ +70°C
작동 압력 범위	0.25~0.7MPa			0.2~0.7MPa
시험 압력	1.2MPa
Operating Speed Range	50~500mm/s
Cushioning	Fixed cushioning at both ends			Fixed cushioning at both ends, with oil-pressure shock absorber
Features	1. Stainless steel guide rail; 2. Adjustable stroke device; 3. Precision linearity and non-rotation accuracy; 4. Locating pin holes provided; 5. Connecting pin made of high-strength alloy steel
포트 스레드	M3×0.5	M5×0.8	M5×0.8	M5×0.8

HGS Mini Precision Slide Cylinder Order Code Generator

현재 주문 코드:

HGS10×15

Series Code

1. Cylinder Bore (mm)

2. Stroke (mm)

3. Magnet Option

4. Stroke Adjuster

5. Sensor Option

Notes:

1. Series: HGS mini precision slide cylinder. Available bores 6 / 8 / 10 / 12 mm; stroke varies by bore (max stroke 10 / 20 / 20 / 25 mm).

2. Magnet: blank = without magnet and sensor bracket; S = with magnet (built-in ring) and sensor bracket.

3. Stroke adjuster: blank = none; J = with stroke adjuster. Bores 10 / 12 can optionally be fitted with a hydraulic shock absorber as a replacement.

4. Sensors EMSH / DMSH require Magnet S; disabled and forced to None when no magnet.

▲ For non-standard strokes or special requirements, please contact sales.

STWA/STWB Series Slide Table Cylinders

Dual guide rod structure type

Bore Size (Inner Diameter mm)	10	16	20	25	32
조치 유형	Double Acting
작업 매체	Air (filtered through 40μm or above filter)
작동 온도	-20°C ~ +70°C
작동 압력 범위	0.2~1.0MPa	0.15~1.0MPa
시험 압력	1.5MPa
Operating Speed Range	30~500mm/s
Cushioning	Oil-pressure shock absorber cushioning
Features	1. Double piston rod structure; 2. Equipped with oil-pressure shock absorber; 3. Mounting plates on both ends and side, three-way air port options
Piston Rod Outer Dia. (mm)	6	10	12	16	20
포트 스레드	M3×0.5	M5×0.8	M5×0.8	M5×0.8	PT1/8
Note	Port thread options include PT thread, G thread, NPT thread.

STW Slide Cylinder Order Code Generator

STW Slide Cylinder (Double-acting) Order Code Generator

현재 주문 코드:

STWB25×50

Series Code

1. Mounting Type

2. Cylinder Bore (mm)

3. Stroke (mm)

4. Magnet Option

5. Thread Standard

6. Sensor Option

Notes:

1. Series: STW slide cylinder (double-acting). Mounting: A = fixed plate type; B = body mounting type.

2. Available bores 10 / 16 / 20 / 25 / 32 mm; stroke varies by bore (max stroke 100 mm for bore 10, 200 mm for the rest). Thread: PT / G / NPT; bore 10 (M5 port) is PT only.

3. Sensors CMSG / EMSG / DMSG require Magnet S (built-in ring); disabled and forced to None when no magnet.

▲ For non-standard strokes or special requirements, please contact sales.

Pneumatic Slide Table Cylinder Series

9 groups · 22 series · Click a group to expand · Click a series to view Guide Type / Key Features / Cross-Replacement

No matching series

Brand names mentioned on this website are cited solely for reference regarding technical standards. This product is not an original product from the respective brand and is not authorized by that brand. It is manufactured in accordance with the corresponding brand’s technical specifications and features a similar appearance; however, it is an independently developed product and has no affiliation with the brand in question.

Key Features

Slide Cylinders are widely used.

Cylinder Body: Unitary construction made of high-strength extruded aluminum alloy; hard-anodized surface for wear and corrosion resistance.
Dual Piston & Dual Piston Rod: Symmetrical dual-shaft design delivering approximately twice the output thrust of a single-rod cylinder with the same bore size.
Linear Guide: Recirculating linear ball guide or crossed-roller guide; features hardened stainless steel guide surfaces and preload to eliminate clearance.
Work Platform: Top surface includes pre-drilled standard threaded holes and locating pin holes for direct mounting of grippers, fixtures, suction cups, or workpieces.
Cushioning & End-Stop: Built-in hydraulic shock absorber and metal stopper at the stroke end to absorb impact and ensure high repeatability.
Optional Accessories: Magnetic switches for position sensing, stroke adjustment screws, and symmetrical reverse-piping configuration.

Linear push-pull

Jacking up

Clamp

Material stop

Material pushing / Feeding

Cylinder Applications

Packaging Machinery

Bag feeding, sealing head, hopper gate, carton flap folding, discharge pusher

Non-standard Automated Assembly Line

Workpiece positioning and clamping, lifting mechanisms for loading and unloading, stopping mechanisms, and component press-fitting.

Automotive assembly

Welding fixture positioning, workpiece clamping, and component transfer

Logistics Conveying Equipment

Assembly line stoppers, sorting pushers, and pallet lifting units.

General-purpose machinery

Machine tool door opening/closing, workpiece feeding, and scrap ejection.

Light Industry and Food Machinery

Conveyor guide plate, simple hold-down device (stainless steel version available for humid environments)

Slide Cylinder: Frequently Asked Questions

MYFEQD offers a comprehensive range of 슬라이드 실린더 solutions.

Our pneumatic actuators comply with the technical standards of major global brands,

providing quick solutions for model selection across various industrial

pneumatic systems.

Where is it primarily used?

Transplanting, transportation, inspection and feeding, small clamping and pressing and other work stations that require guiding accuracy.

Which is better: ball guide rails or sliding bushings?

Ball bearings: high precision, high speed, low friction; bushings: high rigidity, impact resistance, and dust resistance, but prone to stick-slip at low speeds.

How should I choose an itinerary?

Actual stroke + 5–10 mm margin; above 100 mm check load decay curve.

What is the difference in load capacity between horizontal and vertical mounting?

The vertical load capacity generally drops to one-half or one-third of the horizontal capacity; the moment resulting from the outward extension of the center of gravity must be calculated separately.

How do I choose a buffer?

Use rubber pads for light-load, low-speed applications; air cushioning for medium loads; and hydraulic buffers for high-speed, high-inertia applications.

How do I adjust the speed?

Install an exhaust throttle valve at each of the two ports; do not use intake throttling.

Why does creep occur at low speeds?

Issues include lack of lubrication, low air pressure, use of inlet flow control, or binding due to load. Remedies: re-grease, increase pressure, switch to exhaust flow control, and re-align.

Is the terminal impact significant?

If the speed is excessive or the buffer limit is exceeded, install a hydraulic buffer, reduce the speed, or inspect the buffer pad.

Can it be used for press-fitting and clamping?

Short strokes and small eccentricities are acceptable, but the system cannot maintain pressure for extended periods; for pressure holding, select a cylinder with a locking mechanism.

Do you need an oil mist lubricator?

No need. It comes pre-greased from the factory; applying grease spray would actually wash away the original grease.

Filtration requirements?

For particles smaller than 40 μm, it is best to add a 5 μm filter-regulator-lubricator (FRL) unit.

Is the magnetic switch not lighting up?

If the magnetic ring has lost magnetism, the bracket is loose, or the travel is incomplete, first tighten the bracket and realign it.

Is the slide unit drifting or sticking?

Deformation due to over-tightening of mounting bolts, foreign matter in the guide rails, or lateral overload: re-tighten to the specified torque, clean the guide rails, and verify the load.

Can I dismantle the rails and repair them myself?

No. The preload on ball guide rails is factory-set and fixed; disassembling them compromises precision. However, the seals can be replaced using a maintenance kit.

What is used for lubrication?

Replenish with the specified lithium-based grease (e.g., S2) every 2,000 km or 3–6 months; do not use standard general-purpose grease.

When should it be changed?

Parallelism error exceeding limits by a factor of two; uncorrectable stick-slip motion; air leakage at the end seal; hardening due to impact.

Why can't a direct hard connection be made with external institutions?

External binding forces will place the entire load of the torque onto the guide rails, causing rapid wear; use elongated holes or floating joints to ensure proper alignment.

What is the top speed?

Ball-bearing type: 300–500 mm/s (up to 800 mm/s with a buffer); bushing type: ≤300 mm/s. Avoid continuous operation at the limit values.

슬라이드 실린더

기반이 된 정밀도,효과적으로 전달되었다.

OEM / ODM

엄격한 기술 표준

훌륭한 가격

높은 출력 힘

Slide Cylinder: Basic Parameters for Selection

HLS Series Slide Table Cylinder

Dual-Axis Precision Slide Table (Ball-Screw Type)

HLS Precision Slide Cylinder Order Code Generator

HLQ Series Slide Table Cylinder

Twin-Rod Precision Slide Cylinder (Recirculating Ball Type)

HLQ Precision Slide Cylinder Order Code Generator

HLH Series Slide Table Cylinder

Side-rail type precision slide table

HLH Side-rail Precision Slide Cylinder Order Code Generator

HLF Series Slide Table Cylinder

Ultra-thin precision ball type

HLF Ultra-thin Precision Slide Cylinder Order Code Generator

HGS Series Slide Table Cylinder

Miniature precision type

HGS Mini Precision Slide Cylinder Order Code Generator

STWA/STWB Series Slide Table Cylinders

Dual guide rod structure type

STW Slide Cylinder (Double-acting) Order Code Generator

Pneumatic Slide Table Cylinder Series

Key Features

Slide Cylinders are widely used.

Linear push-pull

Jacking up

Clamp

Material stop

Material pushing / Feeding

Packaging Machinery

Non-standard Automated Assembly Line

Automotive assembly

Logistics Conveying Equipment

General-purpose machinery

Light Industry and Food Machinery

Slide Cylinder: Frequently Asked Questions

공장 직판

24시간 내 응답

OEM / ODM

20년의 업계 경력

메시지를 보내주세요

기반이 된 정밀도,
효과적으로 전달되었다.