As core actuating components of pneumatic systems,
these units utilize compressed air to perform reciprocating push-pull motions.
They offer a wide range of bore sizes and stroke lengths,
support diverse mounting configurations, and are extensively used
in various types of automated machinery and equipment.
20 years of experience in the manufacturing industry, delivering custom solutions tailored to your exact specifications and production requirements.
20+ Years ExperienceThe quality we deliver rivals that of major brands, as we strictly adhere to the technical standards of leading domestic and international labels.
ISO-Aligned QualityLocated in Liushi, Yueqing, Wenzhou, Zhejiang Province, China, our company boasts a comprehensive product component supply chain, advanced high-end equipment, and a long-standing manufacturing heritage.
Direct Factory PricingKey selection parameters include pneumatic cylinder bore size, stroke, port size, pressure range, operating environment, and materials.
1. ISO 6430 standard cylinder;
2. The piston seal features a special double-acting design that is compact and offers oil-retention capabilities;
3. Tie-rod construction: the front and rear end caps are connected to the aluminum barrel via tie rods, ensuring high reliability;
4. Compared to ISO 15552 standard cylinders, the SC series is shorter for the same bore size;
5. Smooth cushion adjustment;
6. Optional magnetic piston allows for convenient and flexible sensor installation;
7. A wide range of cylinder specifications and mounting accessories is available;
8. High-temperature resistant seal material allows for an operating temperature range of 0–150°C.
| Bore Size (Inner Diameter mm) | 32 | 40 | 50 | 63 | 80 | 100 | 125 | 160 | 200 | 250 |
|---|---|---|---|---|---|---|---|---|---|---|
| Action Type | Double Acting | |||||||||
| Working Medium | Air (filtered through 40μm or above filter) | |||||||||
| Working Temperature | -20℃ ~ +70℃ | |||||||||
| Operating Pressure Range | 0.15 ~ 1.0 MPa | |||||||||
| Proof Pressure | 1.5 MPa | |||||||||
| Operating Speed Range (mm/s) | 30 ~ 800 | |||||||||
| Cushion Type | Adjustable Pneumatic Cushion | |||||||||
| Cushion Stroke (mm) | 21 | 21 | 21 | 21 | 28 | 29 | 28 | 29 | 33 | 40 |
| Allowable Max Stroke (mm) | 2000 | |||||||||
| Max Stroke (mm) | 1000 | 1200 | 1200 | 1500 | 1500 | 1500 | 1500 | 1500 | 1500 | 1500 |
| Design Feature | Tie-rod type, with pneumatic cushion at both ends | |||||||||
| Piston Rod Dia. (mm) | 12 | 16 | 20 | 20 | 25 | 25 | 32 | 32 | 40 | 50 |
| Piston Rod End Thread | M10*1.25 | M12*1.25 | M16*1.5 | M16*1.5 | M20*1.5 | M20*1.5 | M27*2.0 | M36*2.0 | M36*2.0 | M42*2.0 |
| Port Thread | PT1/8 | PT1/4 | PT1/4 | PT1/4 | PT3/8 | PT3/8 | PT1/2 | PT1/2 | PT3/4 | PT1 |
| Note: Port thread optional PT thread, G thread, NPT thread. Please contact us for other special requirements. | ||||||||||
Generated Order Code:
Notes:
1. Blank means standard configuration, no code required for ordering.
2. Adjustable Stroke only available for SCJ; Second Stroke only available for SCT multi-position model.
3. Max bore size for SCT model is 100; Max stroke for bore 32 is 500.
4. For double rod models SCD / SCJ / BSCD, only Blank, LB, FA, TC mounting are available. FB, CA, CB are disabled.
5. Solenoid parameters only available for SCF model with valve.
▲ For non-standard stroke or special requirements, please contact sales.
| Bore Size (Inner Diameter mm) | 32 | 40 | 50 | 63 | 80 | 100 |
|---|---|---|---|---|---|---|
| Action Type | Double Acting | |||||
| Working Medium | Air (filtered through 40μm or above filter) | |||||
| Working Temperature | -20℃ ~ +70℃ | |||||
| Operating Pressure Range | 0.15 ~ 1.0 MPa | |||||
| Proof Pressure | 1.5 MPa | |||||
| Operating Speed Range | 30 ~ 800 mm/s | |||||
| Cushion Type | Adjustable Pneumatic Cushion | |||||
| Cushion Stroke (mm) | 21 | 21 | 21 | 21 | 28 | 29 |
| Max Stroke (mm) | 1000 | 1200 | 1200 | 1500 | 1500 | 1500 |
| Design Feature | Tie-rod type, with pneumatic cushion at both ends | |||||
| Piston Rod Dia. (mm) | 12 | 16 | 20 | 20 | 25 | 25 |
| Piston Rod End Thread | M10×1.25 | M12×1.25 | M16×1.5 | M16×1.5 | M20×1.5 | M20×1.5 |
| Port Thread | PT1/8 | PT1/4 | PT1/4 | PT3/8 | PT3/8 | PT1/2 |
| Note: Port thread optional PT thread, G thread, NPT thread. Please contact us for other special requirements. | ||||||
Generated Order Code:
Notes:
1. Blank means standard configuration, no code required for ordering.
2. Adjustable Stroke only available for SUJ model; disabled for other types.
3. SUD and SUJ double rod models only support Blank, LB, FA, TC. FB, CA, CB are disabled.
4. Reed Switch can only be selected when Magnet Code = S (with magnet).
Additional specifications available: SUF standard double-acting pneumatic cylinder with valve;SULB standard double-acting type with rear-cap lock; SULF standard double-acting type with front-cap lock. Please contact us for details.
▲ For non-standard stroke or special requirements, please contact sales.
| Bore Size (Inner Diameter mm) | 32 | 40 | 50 | 63 | 80 | 100 | 125 | 160 | 200 |
|---|---|---|---|---|---|---|---|---|---|
| Action Type | Double Acting | ||||||||
| Working Medium | Air (filtered through 40μm or above filter) | ||||||||
| Working Temperature | -20℃ ~ +70℃ | ||||||||
| Operating Pressure Range | 0.15 ~ 1.0 MPa | ||||||||
| Proof Pressure | 1.5 MPa | ||||||||
| Operating Speed Range | 30 ~ 800 mm/s | 30 ~ 500 mm/s | |||||||
| Cushion Type | Adjustable Pneumatic Cushion | ||||||||
| Cushion Stroke (mm) | 21 | 21 | 21 | 21 | 28 | 29 | 28 | 40 | 40 |
| Max Stroke (mm) | 1000 | 1200 | 1200 | 1200 | 1500 | 1500 | 1500 | 1500 | 1500 |
| Design Feature | Tie-rod type, with pneumatic cushion at both ends | ||||||||
| Piston Rod Dia. (mm) | 12 | 16 | 20 | 20 | 25 | 25 | 32 | 40 | 50 |
| Piston Rod End Thread | M10×1.25 | M12×1.25 | M16×1.5 | M16×1.5 | M20×1.5 | M20×1.5 | M27×2.0 | M36×2.0 | M42×2.0 |
| Port Thread | PT1/8 | PT1/4 | PT1/4 | PT3/8 | PT3/8 | PT1/2 | PT1/2 | PT3/4 | PT3/4 |
| Note: Port thread optional PT thread, G thread, NPT thread. Please contact us for other special requirements. | |||||||||
Generated Order Code:
Notes:
1. Blank means standard configuration, no code required for ordering.
2. Adjustable Stroke is only available for SIJ double rod adjustable stroke model; other models will be greyed out.
3. For SID and SIJ double rod series, mounting types FB, CA, CB, CR are disabled and greyed out.
4. Reed switch can only be selected when magnet code "S - With Magnet" is chosen; reed switch will be greyed out if no magnet selected.
5. Seal material blank = TPU; TR dust seal has been removed.
Additional specifications available:
SIF standard double-acting pneumatic cylinder with valve;
SILB standard double-acting cylinder with rear-cap lock;
SILF standard double-acting cylinder with front-cap lock.
Please contact us for details.
▲ For non-standard stroke or special requirements, please contact sales.
1. Proprietary cylinder design;
2. Piston features a special double-acting seal structure that is compact and offers oil-retention capabilities;
3. Features an aluminum barrel with an internal “star” profile (no tie-rods) and excellent corrosion resistance; includes external sensor mounting slots for ease of use;
4. Compared to ISO 15552 standard cylinders, the SAU series is shorter for the same bore size;
5. Smooth cushion adjustment;
6. Mounting accessories are interchangeable with the SC series;
7. High-temperature resistant seal materials allow for an operating temperature range of 0–150°C.
| Bore Size (Inner Diameter mm) | 32 | 40 | 50 | 63 | 80 | 100 |
|---|---|---|---|---|---|---|
| Action Type | Double Acting | |||||
| Working Medium | Air (filtered through 40μm or above filter) | |||||
| Working Temperature | -20℃ ~ +70℃ | |||||
| Operating Pressure Range | 0.15 ~ 1.0 MPa | |||||
| Proof Pressure | 1.5 MPa | |||||
| Operating Speed Range (mm/s) | 30 ~ 800 | |||||
| Cushion Type | Adjustable Pneumatic Cushion | |||||
| Cushion Stroke (mm) | 21 | 21 | 21 | 21 | 28 | 29 |
| Max Allowable Stroke (mm) | 1800 | |||||
| Max Stroke (mm) | 1000 | 1200 | 1200 | 1500 | 1500 | 1500 |
| Design Feature | Cross-shaped cylinder barrel, tie-rodless, pneumatic cushion on front and rear cover, sensor grooves on both sides of cylinder barrel | |||||
| Piston Rod Dia. (mm) | 12 | 16 | 20 | 20 | 25 | 25 |
| Piston Rod End Thread | M10×1.25 | M12×1.25 | M16×1.5 | M16×1.5 | M20×1.5 | M20×1.5 |
| Port Thread | PT1/8 | PT1/4 | PT1/4 | PT3/8 | PT3/8 | PT1/2 |
| Note: Port thread optional PT thread, G thread, NPT thread. Please contact us for other special requirements. | ||||||
Generated Order Code:
Notes:
1.Blank means standard configuration, no code required for ordering.
2.Adjustable Stroke only available for SAUJ (Double Rod Adjustable Stroke), disabled for other models.
3.For SAUD & SAUJ double rod series, mounting style FB, CA, CB are greyed out and unavailable.
4.Magnetic Switch is only enabled when Magnet Code selected "S: With Magnet", greyed out if no magnet.
5.Solenoid Port Size, Rated Voltage & Wiring Type only available for SAUF (Double Acting With Valve), disabled for other models.
▲For non-standard stroke or special requirements, please confirm with sales.
1. ISO 15552 (formerly ISO 6431) standard cylinder
2. Piston seal features a specialized double-acting design; compact dimensions with oil-retention capability
3. Star-shaped aluminum barrel (tie-rod-free design) offers excellent corrosion resistance; external sensor mounting slots allow for quick and easy sensor installation
4. Smooth and stable cushioning adjustment
5. Wide range of cylinder specifications and mounting accessories available
6. High-temperature resistant seal materials allow for an operating temperature range of 0–150°C
| Bore Size (Inner Diameter mm) | 32 | 40 | 50 | 63 | 80 | 100 | 125 | 160 | 200 |
|---|---|---|---|---|---|---|---|---|---|
| Action Type | Double Acting | ||||||||
| Working Medium | Air (filtered through 40μm or above filter) | ||||||||
| Working Temperature | -20℃ ~ +70℃ | ||||||||
| Operating Pressure Range | 0.15 ~ 1.0 MPa | ||||||||
| Proof Pressure | 1.5 MPa | ||||||||
| Operating Speed Range | 30 ~ 800 mm/s | 30 ~ 500 mm/s | |||||||
| Cushion Type | Adjustable Pneumatic Cushion | ||||||||
| Cushion Stroke (mm) | 21 | 21 | 21 | 21 | 28 | 29 | 28 | 40 | 40 |
| Max Stroke (mm) | 1000 | 1200 | 1200 | 1200 | 1500 | 1500 | 1500 | 1500 | 1500 |
| Design Feature | Tie-rod type, with pneumatic cushion at both ends | ||||||||
| Piston Rod Dia. (mm) | 12 | 16 | 20 | 20 | 25 | 25 | 32 | 40 | 50 |
| Piston Rod End Thread | M10×1.25 | M12×1.25 | M16×1.5 | M16×1.5 | M20×1.5 | M20×1.5 | M27×2.0 | M36×2.0 | M42×2.0 |
| Port Thread | PT1/8 | PT1/4 | PT1/4 | PT3/8 | PT3/8 | PT1/2 | PT1/2 | PT3/4 | PT3/4 |
| Note: Port thread optional PT thread, G thread, NPT thread. Please contact us for other special requirements. | |||||||||
Generated Order Code:
Notes:
1. Blank means standard configuration, no code required for order.
2. Adjustable Stroke is only available for SAIJ double rod adjustable stroke model, disabled for other models.
3. For SAID and SAIJ double rod models only, mounting styles FB,CA,CB,CR,FTC,TCM1,TCM2 are disabled; BSAID has no such restriction.
4. Magnetic Sensor is only selectable when Magnet Code "S: With Magnet" is chosen; magnetic sensor will be grayed out without magnet.
5. Solenoid Port Size, Rated Voltage and Wiring Type are only available for SAIF double acting with valve model, grayed out for others.
▲ For non-standard stroke or special requirements, please confirm with sales.
1. ISO 15552 and VDMA 24562 standard cylinders;
2. Piston seals feature a special double-acting design that is compact and offers oil-retention capabilities;
3. Square aluminum barrel design (tie-rod-free) with excellent corrosion resistance;
4. Smooth and stable cushioning adjustment;
5. Wide range of cylinder specifications and mounting accessories available;
6. High-temperature resistant seal materials allow for an operating temperature range of 0–150°C.
| Bore Size (Inner Diameter mm) | 32 | 40 | 50 | 63 | 80 | 100 | 125 |
|---|---|---|---|---|---|---|---|
| Action Type | Double Acting | ||||||
| Working Medium | Air (filtered through 40μm or above filter) | ||||||
| Working Temperature | -20℃ ~ +70℃ | ||||||
| Operating Pressure Range | 0.15 ~ 1.0 MPa | ||||||
| Proof Pressure | 1.5 MPa | ||||||
| Operating Speed Range (mm/s) | 30 ~ 800 | 30 ~ 500 | |||||
| Cushion Type | Adjustable pneumatic cushion, pneumatic cushion on front and rear cover | ||||||
| Cushion Stroke (mm) | 27 | 27 | 30 | 30 | 36 | 36 | 40 |
| Max Allowable Stroke (mm) | 1800 | ||||||
| Max Stroke (mm) | 1000 | 1200 | 1200 | 1500 | 1500 | 1500 | 1500 |
| Design Feature | Square aluminum tube cylinder barrel, tie-rodless, sensor grooves on three sides of cylinder barrel | ||||||
| Piston Rod Dia. (mm) | 12 | 16 | 20 | 20 | 25 | 25 | 32 |
| Piston Rod End Thread | M10×1.25 | M12×1.25 | M16×1.5 | M16×1.5 | M20×1.5 | M20×1.5 | M27×2.0 |
| Port Thread | PT1/8 | PT1/4 | PT1/4 | PT3/8 | PT3/8 | PT1/2 | PT1/2 |
| Note: Port thread optional PT thread, G thread, NPT thread. Please contact us for other special requirements. | |||||||
Generated Order Code:
Notes:
1. Blank means standard configuration, no code required for ordering.
2. Adjustable Stroke is only available for SEJ (Double Rod Adjustable Stroke), disabled for other models.
3. For SED & SEJ double rod models, mounting style FB, CA, CB, CR, TCM1, TCM2 are greyed out and unavailable.
4. Magnetic Sensor can only be selected when Magnet Code is "S: With Magnet", greyed out if no magnet.
▲For non-standard stroke or special requirements, please confirm with sales.
1. JIS standard cylinder;
2. The piston seal features a special double-acting sealing structure; it is compact in size and offers oil-retention capabilities;
3. The JSI series utilizes an aluminum tube with a star-shaped internal profile (tie-rod-free design) and offers excellent corrosion resistance;
4. Compared to ISO 15552 standard cylinders, the JSI series is shorter for the same bore size;
5. Cushioning adjustment is smooth and stable;
6. A wide range of cylinder specifications and mounting accessories is available for customer selection.
| Bore Size (Inner Diameter mm) | 32 | 40 | 50 | 63 | 80 | 100 | 125 |
|---|---|---|---|---|---|---|---|
| Action Type | Double Acting | ||||||
| Working Medium | Air (filtered through 40μm or above filter) | ||||||
| Working Temperature | -20℃ ~ +70℃ | ||||||
| Operating Pressure Range | 0.15 ~ 1.0 MPa | ||||||
| Proof Pressure | 1.5 MPa | ||||||
| Operating Speed Range (mm/s) | 30 ~ 800 | 30 ~ 500 | |||||
| Cushion Type | Adjustable pneumatic cushion, pneumatic cushion on front and rear cover | ||||||
| Cushion Stroke (mm) | 20 | 20.5 | 20.5 | 20.5 | 29 | 29 | 33 |
| Max Allowable Stroke (mm) | 1800 | ||||||
| Max Stroke (mm) | 1000 | 1200 | 1200 | 1500 | 1500 | 1500 | 1500 |
| Design Feature | Aluminum tube cross-shaped cylinder barrel, tie-rodless, sensor grooves on two sides of cylinder barrel | ||||||
| Piston Rod Dia. (mm) | 12 | 16 | 20 | 20 | 25 | 30 | 32 |
| Piston Rod End Thread | M10×1.25 | M14×1.5 | M18×1.5 | M18×1.5 | M22×1.5 | M26×1.5 | M27×2 |
| Port Thread | PT1/8 | PT1/4 | PT1/4 | PT3/8 | PT3/8 | PT1/2 | PT1/2 |
| Note: Port thread optional PT thread, G thread, NPT thread. Please contact us for other special requirements. | |||||||
Generated Order Code:
Notes:
1.Blank = standard configuration, no code required for ordering.
2.Adjustable Stroke is only available for JSIJ Double Rod Double Acting with Adjustable Stroke, disabled for other models.
3.For JSID / JSIJ double rod models: FB, CA, CB, CR mounting styles are greyed out and unavailable.
4.Magnetic Switch can only be selected when Magnet Code = S (With Magnet), otherwise disabled.
▲For non-standard stroke or special requirements, please confirm with sales.
| Bore Size (Inner Diameter mm) | 125 | 160 | 200 | 250 |
|---|---|---|---|---|
| Action Type | Double Acting | |||
| Working Medium | Air (filtered through 40μm or above filter) | |||
| Working Temperature | -20℃ ~ +70℃ | |||
| Operating Pressure Range | 0.15 ~ 1.0 MPa | |||
| Proof Pressure | 1.5 MPa | |||
| Operating Speed Range (mm/s) | 30 ~ 500 | |||
| Cushion Type | Adjustable pneumatic cushion, pneumatic cushion on front and rear cover | |||
| Cushion Stroke (mm) | 40 | 50 | 50 | 60 |
| Max Allowable Stroke (mm) | 2000 | |||
| Max Stroke (mm) | 1500 | 1500 | 1500 | 1500 |
| Design Feature | Tie-rod type, four-corner tie-rod for sensor mounting | |||
| Piston Rod Dia. (mm) | 32 | 40 | 40 | 50 |
| Piston Rod End Thread | M27×2.0 | M36×2.0 | M36×2.0 | M42×2.0 |
| Port Thread | PT1/2 | PT3/4 | PT3/4 | PT1 |
| Note: Port thread optional PT thread, G thread, NPT thread. Please contact us for other special requirements. | ||||
Generated Order Code:
Notes:
1.Blank = standard configuration, no code required for ordering.
2.Adjustable Stroke is only available for SGJ / SGCJ (Double Rod, Adjustable Stroke), disabled for other models.
3.Steel tube series SG, SGD, SGJ: Magnet Code dropdown disabled. Magnet Code only available for aluminum tube SGC, SGCD, SGCJ.
4.Double rod models SGD, SGCD, SGJ, SGCJ: FB, CA, CB, CR are greyed out and unavailable.
5.Magnetic Switch is only enabled when Magnet Code = S (With Magnet).
6.Seal rule: Aluminum tube default TPU; Steel tube default NBR. 250 bore size does NOT support TPU seals.
▲ For non-standard stroke or special requirements, please confirm with sales.
1. The cylinder barrel is made of high-quality precision-drawn aluminum alloy tubing; the inner surface undergoes hard anodizing, resulting in a coating thickness of 30μm and a hardness of MHV400.
2. The cylinder end caps are manufactured using an advanced die-casting process.
3. The piston rod surface undergoes pre-rolling hardening, followed by hard chrome plating and precision grinding, ensuring excellent rust and wear resistance.
4. Featuring an advanced sealing structure and superior quality, the cylinder operates reliably without external lubrication, offers a low start-up pressure, and ensures a long service life.
| Bore Size (Inner Diameter mm) | 32 | 40 | 50 | 63 | 80 | 100 | 125 | 160 | 200 | 250 | 320 | 400 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Action Type | Double Acting | |||||||||||
| Working Medium | Air (filtered through 40μm or above filter) | |||||||||||
| Working Temperature | +5℃ ~ +60℃ | |||||||||||
| Operating Pressure Range | 0.15 ~ 1.0 MPa | |||||||||||
| Proof Pressure | 1.5 MPa | |||||||||||
| Operating Speed Range (mm/s) | 50 ~ 500 | |||||||||||
| Cushion Type | Pneumatic Cushion | |||||||||||
| Cushion Stroke (mm) | 12 | 15 | 20 | 20 | 25 | 25 | 40 | 40 | 50 | 55 | 60 | 60 |
| Max Stroke (mm) | 500 | 500 | 600 | 600 | 1000 | 1000 | 1200 | 1500 | 2000 | 2000 | 2000 | 2000 |
| Design Feature | Tie-rod type, four-corner tie-rod for sensor mounting | |||||||||||
| Piston Rod Dia. (mm) | 12 | 16 | 20 | 20 | 25 | 25 | 32 | 40 | 40 | 50 | 60 | 60 |
| Piston Rod End Thread | M10×1.25 | M14×1.5 | M18×1.5 | M18×1.5 | M22×1.5 | M27×1.5 | M27×2 | M36×2 | M36×2 | M42×2 | M48×2 | M56×4 |
| Port Thread | ZG1/8 | ZG1/4 | ZG3/8 | ZG3/8 | ZG1/2 | ZG1/2 | G1 | G3/4 | G3/4 | G3/4 | G3/4 | G3/4 |
| Note: Port thread optional PT thread, G thread, NPT thread. Please contact us for other special requirements. | ||||||||||||
Generated Order Code:
Notes:
1. Blank means standard configuration, no code required for ordering.
2. Bore 32~100: Default AL aluminum tube, CS steel tube option disabled; Bore 125~400: Default CS steel tube, AL aluminum tube option disabled.
3. Magnetic switch is only enabled when Magnet Code = S (With Magnet). Magnetic switch will be greyed out if no magnet selected.
▲ For non-standard stroke or special requirements, please confirm with sales.
JMB/JMDB is a standard square-end-cap pneumatic cylinder—an upgraded, energy-efficient, and lightweight version of the MB series. It features a double-acting, non-lube design with built-in, self-adjusting air cushioning. Intermediate bore sizes have been added, and air consumption has been reduced. The JMDB model includes a built-in magnet for compatibility with magnetic switches, making it suitable for a wide range of automation equipment.
| Bore Size (Inner Diameter mm) | 32 | 40 | 45 | 50 | 56 | 63 | 67 | 80 | 85 | 100 |
|---|---|---|---|---|---|---|---|---|---|---|
| Action Type | Double Acting | |||||||||
| Working Medium | Air (filtered through 40μm or above filter) | |||||||||
| Working Temperature | +5℃ ~ +60℃ | |||||||||
| Operating Pressure Range | 0.05 ~ 0.7 MPa | |||||||||
| Proof Pressure | 1.0 MPa | |||||||||
| Operating Speed Range (mm/s) | 50 ~ 500 | |||||||||
| Cushion Type | Non-adjustable pneumatic cushion + rubber cushion combined | |||||||||
| Max Stroke (mm) | 300 | 300 | 300 | 400 | 400 | 400 | 400 | 500 | 500 | 500 |
| Piston Rod Dia. (mm) | 10 | 14 | 14 | 18 | 18 | 18 | 18 | 22 | 22 | 26 |
| Piston Rod End Thread | M10×1.25 | M14×1.5 | M14×1.5 | M18×1.5 | M18×1.5 | M18×1.5 | M18×1.5 | M22×1.5 | M22×1.5 | M26×1.5 |
| Port Thread | PT1/8 | PT1/8 | PT1/8 | PT1/8 | PT1/8 | PT1/4 | PT1/4 | PT1/4 | PT1/4 | PT3/4 |
| Note: Port thread optional PT thread, G thread, NPT thread. Please contact us for other special requirements. | ||||||||||
Generated Order Code:
Notes:
1. Blank means standard configuration, no code required for ordering.
2. For bore φ45, φ56, φ67, φ85: Mounting style L, F, G are unavailable and will be greyed out.
▲ For non-standard stroke or special requirements, please confirm with sales.
MB series is a general-purpose, tie-rod type, double-acting pneumatic cylinder. Characterized by a compact structure, stable performance, and high interchangeability, it is a widely used pneumatic actuator in automation equipment. This product supports non-lubricated operation and features a built-in floating cushioning mechanism, resulting in low operating noise, minimal impact, and a long service life. It can be equipped with an internal magnet for use with magnetic switches to enable automated signal sensing and supports various mounting and cushioning configurations. With a comprehensive range of bore sizes and stroke options, it is suitable for standard pneumatic applications—such as clamping, lifting, pushing/pulling, and conveying—and is widely used across various types of automated machinery.
| Bore Size (Inner Diameter mm) | 32 | 40 | 50 | 63 | 80 | 100 | 125 |
|---|---|---|---|---|---|---|---|
| Action Type | Double Acting | ||||||
| Working Medium | Air (filtered through 40μm or above filter) | ||||||
| Working Temperature | -10℃ ~ +70℃ | ||||||
| Operating Pressure Range | 0.05 ~ 1.0 MPa | ||||||
| Proof Pressure | 1.5 MPa | ||||||
| Operating Speed Range (mm/s) | 50 ~ 1000 | ||||||
| Cushion Type | Non-adjustable pneumatic cushion or rubber cushion combined | ||||||
| Customizable Max Stroke | 25 ~ 2700 | ||||||
| Max Stroke Range (mm) | 25~1000 | 25~1800 | 25~1800 | 25~1800 | 25~1800 | 25~1800 | 25~2000 |
| Piston Rod Dia. (mm) | 12 | 16 | 20 | 20 | 25 | 30 | 32 |
| Piston Rod End Thread | M10×1.25 | M14×1.5 | M18×1.5 | M18×1.5 | M22×1.5 | M26×1.5 | M27×1.5 |
| Port Thread | PT1/8 | PT1/4 | PT1/4 | PT3/8 | PT3/8 | PT1/2 | PT1/2 |
| Note: Port thread optional PT thread, G thread, NPT thread. Please contact us for other special requirements. | |||||||
Generated Order Code:
Notes:
1. Blank means standard configuration, no code required for ordering.
2. Accessory 1 (Swivel Base N) is only available for mounting style D and T, it will be greyed out for other mount types.
3. Magnetic switch options are only available for models with built-in magnet; it will be disabled for standard models without magnet.
4. "Z" is fixed character inside order code string, no separate sequence number.
▲ For non-standard stroke or special requirements, please confirm with sales.
| Bore Size (Inner Diameter mm) | 40 | 50 | 63 | 80 | 100 |
|---|---|---|---|---|---|
| Action Type | Double Acting | ||||
| Working Medium | Air (filtered through 40μm or above filter) | ||||
| Working Temperature | -10℃ ~ +70℃ | ||||
| Operating Pressure Range | 0.05 ~ 1.0 MPa | ||||
| Proof Pressure | 1.5 MPa | ||||
| Operating Speed Range (mm/s) | 50 ~ 500 | ||||
| Cushion Type | Non-adjustable pneumatic cushion or rubber cushion combined | ||||
| Customizable Max Stroke | 1 ~ 1800 | ||||
| Piston Rod Dia. (mm) | 16 | 20 | 20 | 25 | 30 |
| Piston Rod End Thread | M14×1.5 | M18×1.5 | M18×1.5 | M22×1.5 | M26×1.5 |
| Port Thread | PT1/4 | PT3/8 | PT3/8 | PT1/2 | PT1/2 |
| Note: Port thread optional PT thread, G thread, NPT thread. Please contact us for other special requirements. | |||||
Generated Order Code:
Note:
1. Blank means standard configuration, no code required when ordering.
2. Accessory 1 (Swivel bracket N) only available for mounting style D and T; other mount types will be greyed out.
3. Magnetic switch only available for models with built-in magnet(CD prefix). The switch dropdown will be disabled for non-magnet models.
4. Tube Material selector will be greyed out for models with built-in magnet. Steel tube(F) cannot be used with internal magnet.
5. Z is fixed character inside model code, not counted as a sequence item.
▲ Non-standard stroke & special custom requirements need confirmation with sales.
1. High thrust and large bore size; suitable for heavy-load lifting, pressing, material clamping, and gate actuation.
2. Comprehensive mounting options to accommodate various mechanical loading configurations (clevis, fixed flange, foot mount).
3. Built-in air cushioning minimizes impact during long-stroke, heavy-load operations; the non-lube design eliminates the need for air lubricators, simplifying maintenance.
4. Optional air-hydraulic version available for smooth, low-speed feed; CS1Q low-friction version suitable for precise pressure control.
5. Disadvantages: High dead weight; lightweight CS2 series alternatives are now available for bore sizes φ125–160, offering reduced weight and lower deflection.
| Bore Size (Inner Diameter mm) | 125 | 140 | 160 | 180 | 200 | 125 | 140 | 160 |
|---|---|---|---|---|---|---|---|---|
| Action Type | Double Acting | |||||||
| Usage Type | Lubricated / Non-lubricated | Air-oil Combined Type | ||||||
| Working Medium | Air (filtered through 40μm or above filter) | Turbin Oil | ||||||
| Working Temperature | 0 ~ 60°C | 5 ~ 60°C | ||||||
| Operating Pressure Range | 0.05 ~ 0.97 MPa | 0.05 ~ 0.7 MPa | 0.06 ~ 0.97 MPa | |||||
| Proof Pressure | 1.57 MPa | 1.2 MPa | 1.57 MPa | |||||
| Operating Speed Range (mm/s) | 50 ~ 500 | 0.5 ~ 200 | ||||||
| Cushion Type | Pneumatic Cushion | No Cushion | ||||||
| Customizable Max Stroke (mm) | 1400 | 1400 | 1400 | 1500 | 998 | 1400 | 1400 | 1400 |
| Piston Rod Dia. (mm) | 36 | 36 | 40 | 45 | 50 | 36 | 36 | 40 |
| Piston Rod End Thread | M30×1.5 | M30×1.5 | M36×1.5 | M40×1.5 | M45×1.5 | M30×1.5 | M30×1.5 | M36×1.5 |
| Port Thread | PT1/2 | PT1/2 | PT3/4 | PT3/4 | PT3/4 | PT1/2 | PT1/2 | PT3/4 |
| Note: Port thread optional PT thread, G thread, NPT thread. Please contact us for other special requirements. | ||||||||
Generated Order Code:
Notes:
1. Blank = standard configuration, no code required for ordering.
2. Reed switch is only available for magnet integrated models (CDS1/CDS1W/CDS1Q). Reed switch items will be grayed out and disabled for non-magnet models.
3. Type description: No Mark=Lubrication Type; N=Non-Lubrication Type; H=Air-Oil Combined Type; Air-Oil Combined Type(H) only supports bore 125/140/160. Bore 180/200 will be disabled when H selected
4. Cylinder tube material rules (only valid for non-magnet CS1/CS1W/CS1Q series):
▪ No Mark: Bore 125/140/160 with stroke ≤1000/1200: Aluminum tube; stroke over limit: Steel tube; 180~200: Steel tube for full stroke range
▪ F Mark: All steel tube, max stroke 1200 (125/140/160); Ø180, Ø200 pressure vessel products use aluminum tube.
5. Stroke validation rules:
▪ Bore 125,140: Max stroke 1000 for B/C/D/G/T; Max stroke 1400 for L/F
▪ Bore 160: Max stroke 1200 for B/C/D/G/T; Max stroke 1400 for L/F
▪ Bore 180: Max stroke 1200 for B/C/D/G/T; Max stroke 1500 for L/F
▪ Bore 200: Max stroke 998 for all mounting styles
6. If input stroke exceeds limit, order code will show stroke overrun warning.
▲ Exceeding max stroke limit is non-standard, please confirm with sales.
| Bore Size (Inner Diameter mm) | 125 | 140 | 160 | 180 | 200 | 250 | 320 |
|---|---|---|---|---|---|---|---|
| Action Type | Double Acting | ||||||
| Working Medium | Air (filtered through 40μm or above filter) | ||||||
| Working Temperature | 0 ~ 70°C | ||||||
| Operating Pressure Range | 0.05 ~ 0.97 MPa | 0.05 ~ 0.7 MPa | |||||
| Proof Pressure | 1.57 MPa | 1.2 MPa | |||||
| Operating Speed Range (mm/s) | 50 ~ 500 | 50 ~ 300 | |||||
| Cushion Type | Pneumatic Cushion | Pneumatic + Rubber Cushion | |||||
| Piston Rod Dia. (mm) | 32 | 32 | 38 | 40 | 45 | 56 | 65 |
| Piston Rod End Thread | M30×1.5 | M30×1.5 | M36×1.5 | M40×1.5 | M45×1.5 | M56×2 | M64×2 |
| Port Thread | PT1/2 | PT1/2 | PT3/4 | PT1/2 | PT1/2 | PT3/4 | PT3/4 |
| Note: Port thread optional PT thread, G thread, NPT thread. Please contact us for other special requirements. | |||||||
Generated Order Code:
Notes:
1. No Mark = standard configuration, no code required for ordering.
2. Reed switch and reed switch quantity are only available for magnet integrated models (CDS2/CDS2W/CDS2V/CDS2P/CDS2Y). These two items will be grayed out for non-magnet models.
3. Reed switch quantity only takes effect when reed switch is selected.
4. Stroke limit rules:
▪ Bore 125/140: Max stroke 1000mm for B/C/D/G/T mount; Max stroke 1600mm for L/F foot/rod flange mount
▪ Bore 160/180: Max stroke 1200mm for B/C/D/G/T mount; Max stroke 1569mm for L/F foot/rod flange mount
▪ Bore 200: Max stroke 998mm for all mounting styles
▪ Bore 250: Max stroke 813mm for all mounting styles
▪ Bore 320: Max stroke 495mm for all mounting styles
5. If input stroke exceeds upper limit, order code will show [Stroke Overrun]
▲ Exceeding max stroke is non-standard, please confirm with sales.
| Parameter Type | Description |
|---|---|
| Cylinder Type | CP96SDB, CP96K |
| Action Type | Single Rod, Double Acting |
| Medium | Dry clean compressed air (filtered ≥40μm filter) & turbine oil |
| Operating Pressure | 0.05~1.0MPa |
| Proof Pressure | 1.5MPa |
| Operating Temp | -20℃ ~70℃ |
| Speed Range | 50~1000mm/s |
| Cushion Type | Double side air cushion + bumper cushion |
| Seal Material | NBR Nitrile rubber (Std); Optional FKM fluoro rubber for high temp |
| Barrel Material | Al alloy; Optional 304 SS,316 SS,steel |
| Rod Material | 45# steel hard chrome plating |
| Mounting Type | Basic, axial foot, rodless side flange, single clevis, double clevis, intermediate trunnion, rod side flange |
| Rod End Accessory | I-joint, Y-joint, rod eye, floating joint, single knuckle joint, double knuckle joint, protective boot |
| Magnetic Switch | M9N, M9P, M9B |
Please contact us for custom requirements regarding non-standard technical specifications.
| Bore (mm) | Rod OD (mm) | Port Size | Standard Stroke (mm) | Max Stroke (mm) |
|---|---|---|---|---|
| 32 | 12 | G1/8 | 25,50,80,100,125,160,200,250,320,400,500 | 20000 |
| 40 | 16 | G1/4 | 25,50,80,100,125,160,200,250,320,400,500 | 20000 |
| 50 | 20 | G1/4 | 25,50,80,100,125,160,200,250,320,400,500,600 | 20000 |
| 63 | 20 | G3/8 | 25,50,80,100,125,160,200,250,320,400,500,600 | 20000 |
| 80 | 25 | G3/8 | 25,50,80,100,125,160,200,250,320,400,500,600,700,800 | 20000 |
| 100 | 25 | G1/2 | 25,50,80,100,125,160,200,250,320,400,500,600,700,800 | 20000 |
| Note: Thread options: PT, G, NPT. Please contact us for special stroke requirements. | ||||
| Parameter Type | Description |
|---|---|
| Cylinder Type | C96, C96K, C96Y |
| Action Type | Single Rod, Double Acting |
| Medium | Dry clean compressed air (filtered ≥40μm filter) & turbine oil |
| Operating Pressure | 0.05~1.0MPa |
| Proof Pressure | 1.5MPa |
| Operating Temp | -20℃ ~70℃ |
| Speed Range | 50~1000mm/s |
| Cushion Type | Double side air cushion + bumper cushion |
| Seal Material | NBR Nitrile rubber (Std); Optional FKM fluoro rubber for high temp |
| Barrel Material | Al alloy; Optional 304 SS,316 SS,steel |
| Rod Material | 45# steel hard chrome plating |
| Mounting Type | Basic, axial foot, rodless side flange, single clevis, double clevis, intermediate trunnion, rod side flange |
| Rod End Accessory | I-joint, Y-joint, rod eye, floating joint, single knuckle joint, double knuckle joint, protective boot |
| Magnetic Switch | M9N, M9P, M9B |
Please contact us for custom requirements regarding non-standard technical specifications.
| Bore (mm) | Rod OD (mm) | Port Size | Standard Stroke (mm) | Max Stroke (mm) |
|---|---|---|---|---|
| 32 | 12 | G1/8 | 25,50,80,100,125,160,200,250,320,400,500 | 10000 |
| 40 | 16 | G1/4 | 25,50,80,100,125,160,200,250,320,400,500 | 19000 |
| 50 | 20 | G1/4 | 25,50,80,100,125,160,200,250,320,400,500,600 | 19000 |
| 63 | 20 | G3/8 | 25,50,80,100,125,160,200,250,320,400,500,600 | 19000 |
| 80 | 25 | G3/8 | 25,50,80,100,125,160,200,250,320,400,500,600,700,800 | 19000 |
| 100 | 25 | G1/2 | 25,50,80,100,125,160,200,250,320,400,500,600,700,800 | 19000 |
| 125 | 32 | G1/2 | 25,50,80,100,125,160,200,250,320,400,500,600,700,800,900,1000 | 20000 |
| Note: Thread options: PT, G, NPT. Please contact us for special stroke requirements. | ||||
| Parameter Type | Description |
|---|---|
| Cylinder Type | Multiple variants: Contact us |
| Action Type | Single Rod, Double Acting |
| Medium | Dry clean compressed air (filtered ≥40μm filter) & turbine oil |
| Operating Pressure | 0.03~1.2MPa |
| Proof Pressure | 1.2MPa |
| Operating Temp | -20℃ ~80℃ |
| Cushion Type | P: Both ends with elastic bumper; PPV: Both ends with adjustable air cushion; PPS: Both ends with self-adjusting air cushion |
| Note: For other requirements, refer to Festo official documents. Please contact us if you have questions. | |
Please contact us for custom requirements regarding non-standard technical specifications.
| Bore (mm) | Rod OD (mm) | Rod Thread | Cushion Length | Port Size | Standard Stroke (mm) | Max Stroke (mm) |
|---|---|---|---|---|---|---|
| 32 | 12 | M10*1.25 | 17 | G1/8 | 20,25,30,40,50,60,70,80,100,125,150,160,200,250,300,320,400,500 | 2800 |
| 40 | 16 | M12*1.25 | 19 | G1/4 | 20,25,30,40,50,60,70,80,100,125,150,160,200,250,300,320,400,500 | 2800 |
| 50 | 20 | M16*1.5 | 22 | G1/4 | 20,25,30,40,50,60,70,80,100,125,150,160,200,250,300,320,400,500 | 2800 |
| 63 | 20 | M16*1.5 | 22 | G3/8 | 20,25,30,40,50,60,70,80,100,125,150,160,200,250,300,320,400,500 | 2800 |
| 80 | 25 | M20*1.5 | 31 | G3/8 | 20,25,30,40,50,60,70,80,100,125,150,160,200,250,300,320,400,500 | 2800 |
| 100 | 25 | M20*1.5 | 31 | G1/2 | 20,25,30,40,50,60,70,80,100,125,150,160,200,250,300,320,400,500 | 2800 |
| 125 | 32 | M27*2 | 45 | G1/2 | 20,25,30,40,50,60,70,80,100,125,150,160,200,250,300,320,400,500 | 2800 |
| Note: Pipe thread options: PT, G, NPT. Please contact us for special stroke requirements. | ||||||
| Parameter Type | Description |
|---|---|
| Cylinder Model | DNC, DNC-KP, DNCKE, DNC-EL, DNC-V1~V6, DNCT |
| Action Type | Single Rod, Double Acting |
| Medium | Dry clean compressed air (filtered ≥40μm filter) & turbine oil |
| Operating Pressure | 0.01~1.2MPa |
| Proof Pressure | 1.2MPa |
| Operating Temp | -20℃ ~80℃ |
| Cushion Type | P: Both ends with elastic bumper; PPV: Both ends with adjustable air cushion; PPS: Both ends with self-adjusting air cushion |
| Note: For other requirements, refer to Festo official documents. Please contact us if you have questions. | |
Please contact us for custom requirements regarding non-standard technical specifications.
| Bore (mm) | Rod OD (mm) | Cushion Length | Port Size | Standard Stroke (mm) | Max Stroke (mm) |
|---|---|---|---|---|---|
| 32 | 12 | 20 | G1/8 | 25,40,50,80,100,125,160,200,250,320,400,500 | 2000 |
| 40 | 16 | 20 | G1/4 | 25,40,50,80,100,125,160,200,250,320,400,500 | 2000 |
| 50 | 20 | 22 | G1/4 | 25,40,50,80,100,125,160,200,250,320,400,500 | 2000 |
| 63 | 20 | 22 | G3/8 | 25,40,50,80,100,125,160,200,250,320,400,500 | 2000 |
| 80 | 25 | 32 | G3/8 | 25,40,50,80,100,125,160,200,250,320,400,500 | 2000 |
| 100 | 25 | 32 | G1/2 | 25,40,50,80,100,125,160,200,250,320,400,500 | 2000 |
| 125 | 32 | 42 | G1/2 | 25,40,50,80,100,125,160,200,250,320,400,500 | 2000 |
| Note: Pipe thread options: PT, G, NPT. Please contact us for special stroke requirements. | |||||
| Parameter Category | Description |
|---|---|
| Pneumatic Cylinder Type | Multiple derivative types |
| Action Type | Single rod, double acting |
| Media | Compressed air conform to ISO 8573-1:2010 [7:4:4] |
| Operating Pressure Range | 0.01~1.2MPa |
| Proof Pressure | 1.2MPa |
| Working Temp. | -20°C ~ 80°C |
| Cushion Type | P: Elastic cushion at both ends, PPV: Adjustable air cushion at both ends, PPS: Self-adjust air cushion at both ends |
| Note: For other specs, refer to Festo official docs. Contact us if any questions. | |
Please contact us for custom requirements regarding non-standard technical specifications.
| Bore (mm) | Piston Rod OD (mm) | Cushion Length | Port Size | Standard Stroke (mm) | Max Stroke (mm) |
|---|---|---|---|---|---|
| 32 | 12 | 19 | G1/8 | 10~2000 | 2000 |
| 40 | 16 | 21 | G1/4 | 10~2000 | 2000 |
| 50 | 20 | 23 | G1/4 | 10~2000 | 2000 |
| 63 | 20 | 23 | G3/8 | 10~2000 | 2000 |
| 80 | 25 | 30 | G3/8 | 10~2000 | 2000 |
| 100 | 25 | 30 | G1/2 | 10~2000 | 2000 |
| 125 | 32 | 40 | G1/2 | 10~2000 | 2000 |
| Note: Pipe thread optional: PT, G, NPT. Contact us for other special strokes. | |||||
| Parameter Category | Description |
|---|---|
| Pneumatic Cylinder Type | Multiple derivative types |
| Action Type | Single rod, double acting |
| Media | Compressed air conform to ISO 8573-1:2010 [7:4:4] |
| Operating Pressure Range | 0.01~1.2MPa |
| Proof Pressure | 1.2MPa |
| Working Temp. | -20°C ~ 80°C |
| Cushion Type | P: Elastic cushion at both ends, PPV: Adjustable air cushion at both ends, PPS: Self-adjust air cushion at both ends |
| Note: For other specs, refer to Festo official docs. Contact us if any questions. | |
Please contact us for custom requirements regarding non-standard technical specifications.
| Bore (mm) | Piston Rod OD (mm) | Cushion Length | Port Size | Standard Stroke (mm) | Max Stroke (mm) |
|---|---|---|---|---|---|
| 32 | 12 | 17 | G1/8 | 25,40,50,80,100,125,160,200,250,320,400,500 | 2000 |
| 40 | 16 | 19 | G1/4 | 25,40,50,80,100,125,160,200,250,320,400,500 | 2000 |
| 50 | 20 | 22 | G1/4 | 25,40,50,80,100,125,160,200,250,320,400,500 | 2000 |
| 63 | 20 | 22 | G3/8 | 25,40,50,80,100,125,160,200,250,320,400,500 | 2000 |
| 80 | 25 | 31 | G3/8 | 25,40,50,80,100,125,160,200,250,320,400,500 | 2000 |
| 100 | 25 | 31 | G1/2 | 25,40,50,80,100,125,160,200,250,320,400,500 | 2000 |
| 125 | 32 | 45 | G1/2 | 25,40,50,80,100,125,160,200,250,320,400,500 | 2000 |
| Note: Pipe thread optional: PT, G, NPT. Contact us for other special strokes. | |||||
| Parameter Category | Description |
|---|---|
| Pneumatic Cylinder Type | Multiple derivative types |
| Action Type | Single rod, double acting |
| Media | Compressed air conform to ISO 8573-1:2010 [7:4:4] |
| Operating Pressure Range | 0.01~1.2MPa |
| Proof Pressure | 1.2MPa |
| Working Temp. | -20°C ~ 80°C |
| Cushion Type | P: Elastic cushion at both ends, PPV: Adjustable air cushion at both ends, PPS: Self-adjust air cushion at both ends |
| Note: For other specs, refer to Festo official docs. Contact us if any questions. | |
Please contact us for custom requirements regarding non-standard technical specifications.
| Bore (mm) | Piston Rod OD (mm) | Cushion Length | Port Size | Standard Stroke (mm) | Max Stroke (mm) |
|---|---|---|---|---|---|
| 32 | 12 | 17 | G1/8 | 25,40,50,80,100,125,160,200,250,320,400,500 | 2000 |
| 40 | 16 | 19 | G1/4 | 25,40,50,80,100,125,160,200,250,320,400,500 | 2000 |
| 50 | 20 | 22 | G1/4 | 25,40,50,80,100,125,160,200,250,320,400,500 | 2000 |
| 63 | 20 | 22 | G3/8 | 25,40,50,80,100,125,160,200,250,320,400,500 | 2000 |
| 80 | 25 | 31 | G3/8 | 25,40,50,80,100,125,160,200,250,320,400,500 | 2000 |
| 100 | 25 | 31 | G1/2 | 25,40,50,80,100,125,160,200,250,320,400,500 | 2000 |
| 125 | 32 | 45 | G1/2 | 25,40,50,80,100,125,160,200,250,320,400,500 | 2000 |
| Note: Pipe thread optional: PT, G, NPT. Contact us for other special strokes. | |||||
| Series | Brand | Standard | Structure Type | Bore Range(mm) | Key Features | Direct Replacement Models |
|---|---|---|---|---|---|---|
| SC | AirTAC | Enterprise Standard | Exposed Tie Rod | 32~250 | Most common type. Exposed tie rod, magnetic switch mountable, cost-effective | SU (Same mounting dimensions); MDBB (Different standard, dimensions not interchangeable) |
| SU | AirTAC | Enterprise Standard | Concealed Tie Rod | 32~200 | Tie rod concealed inside profile, square shape, impact resistance | SC (Direct interchangeable at same bore) |
| SI | AirTAC | ISO 15552 | Non-tie Rod Profile | 32~200 | Square aluminum profile, switch slots on 4 sides, European mounting dimension | SE, SAI, CP96SDB, DSBC (Full ISO15552 series) |
| SAU | AirTAC | ISO 6431 | Non-tie Rod Profile | 32~100 | Old European standard profile cylinder, predecessor of SI, compact structure | SI (New ISO15552); DNC (Festo old European standard) |
| SAI | AirTAC | ISO 15552 | Tie Rod Type | 32~200 | ISO15552 tie rod cylinder, high strength, complete mounting accessories | SI, SE, CP96SDB, DSBC |
| SE | AirTAC | ISO 15552 | Non-tie Rod Profile | 32~125 | Square aluminum non-tie rod, comply with VDMA standard, good anti-side-load performance | SI, SAI, CP96SDB, DSBC |
| JSI | AirTAC | JIS Japanese Standard | Non-tie Rod Profile | 32~100 | JIS standard, shorter overall length at same bore, Miki style profile | MDBB; JMDBB |
| SG | AirTAC | ISO 15552 | Large Bore Tie Rod | 125~250 | Large bore ISO cylinder, steel/aluminum tube optional, heavy-duty tie rod structure | DSBG; CDS1B, CDS2B |
| Series | Brand | Standard | Structure Type | Bore Range(mm) | Key Features | Direct Replacement Models |
|---|---|---|---|---|---|---|
| QGB | Multiple Domestic Makers | Enterprise / JB Standard | Tie Rod Cast Iron / Steel Tube | 50~400 | Heavy-duty cylinder, cast iron barrel, high pressure resistance, suitable for harsh environments | No 1:1 direct replacement, alternative selection based on thrust & space |
| Series | Brand | Standard | Structure Type | Bore Range(mm) | Key Features | Direct Replacement Models |
|---|---|---|---|---|---|---|
| MDBB | SMC | JIS Japanese Standard | Tie Rod Square End Cap | 32~125 | SMC classic JIS tie rod cylinder, excellent buffer performance, air port & buffer valve on same side | JSI, JMDBB |
| JMDBB | Domestic Replica | JIS Japanese Standard | Tie Rod Type | 32~100 | Domestic copy of SMC MDBB, fully consistent mounting dimensions, lower cost | MDBB |
| CDA2B | SMC | JIS Japanese Standard | Tie Rod Double Rod | 40~100 | CA series double rod cylinder, JIS standard, optional anti-rotation structure | AirTAC SCD double rod cylinder (Dimensions not interchangeable) |
| CDS1B | SMC | JIS / Asia Standard | Large Bore Tie Rod | 125~300 | CS1 large bore tie rod cylinder, built-in air buffer | SG; DSBG; CDS2B (Same series upgraded model) |
| CDS2B | SMC | JIS / Asia Standard | Lightweight Large Bore Tie Rod | 125~300 | CS2 upgraded from CS1, 65% weight reduction, mounting dimensions fully same as CDS1B | CDS1B; SG; DSBG |
| CP96SDB | SMC | ISO 15552 | Non-tie Rod Profile | 32~125 | SMC European profile cylinder, lightweight, composite buffer, compatible D-M9 magnetic switch | SI, SE, SAI, DSBC, S96SDB |
| S96SDB | Domestic Replica | ISO 15552 | Non-tie Rod Profile | 32~100 | Domestic copy of SMC CP96SDB, consistent mounting dimensions, lower price | CP96SDB; SI; SE; DSBC |
| Series | Brand | Standard | Structure Type | Bore Range(mm) | Key Features | Direct Replacement Models |
|---|---|---|---|---|---|---|
| DSBC | Festo | ISO 15552 | Non-tie Rod Profile | 32~100 | Festo new generation European cylinder, self-adjusting buffer, dual switch slot, DNC successor | DNC; SI; SE; CP96SDB |
| DNC | Festo | ISO 6431 | Non-tie Rod Profile | 32~125 | Festo classic old European cylinder, adjustable buffer, gradually phased out | DSBC (Direct replacement); SAU |
| CRDNG | Festo | ISO 15552 | Full Stainless Steel Profile | 32~100 | Barrel, piston rod & end caps all stainless steel, excellent corrosion resistance, food & pharmaceutical clean application | DSBF (Coated version, lower anti-corrosion grade) |
| DSBF | Festo | ISO 15552 | Anti-corrosion Coated Profile | 32~100 | Profile with anti-corrosion coating, food grade grease, food industry | CRDNG (Upgraded full stainless steel); DSBC (Base version) |
| DSBG | Festo | ISO 15552 | Profile + Built-in Tie Rod | 32~320 | Large bore European cylinder, built-in tie rod for high rigidity, self-adjusting buffer | SG; CDS1B, CDS2B |
Brand names mentioned on this website are cited solely for reference regarding technical standards. This product is not an original product from the respective brand and is not authorized by that brand. It is manufactured in accordance with the corresponding brand’s technical specifications and features a similar appearance; however, it is an independently developed product and has no affiliation with the brand in question.
Standard Cylinders – Application Areas
Suitable for:
Linear motion requiring only two end positions
(fully extended and fully retracted)
without the need for intermediate stops.
Bag feeding, sealing head, hopper gate, carton flap folding, discharge pusher
Workpiece positioning and clamping, lifting mechanisms for loading and unloading, stopping mechanisms, and component press-fitting.
Welding fixture positioning, workpiece clamping, and component transfer
Assembly line stoppers, sorting pushers, and pallet lifting units.
Machine tool door opening/closing, workpiece feeding, and scrap ejection.
Conveyor guide plate, simple hold-down device (stainless steel version available for humid environments)
MYFEQD offers a comprehensive range of standard pneumatic cylinder solutions.
Our pneumatic actuators comply with the technical standards of major global brands, providing quick solutions for model selection across various industrial
pneumatic systems.
A cylinder’s thrust depends primarily on air pressure and bore size. Under standard operating conditions with 0.5 MPa pressure, we have reference values for standard thrust; the extension thrust is greater than the retraction pulling force. If you provide the operating air pressure, I can calculate the exact force for you to ensure it is sufficient for smooth, stall-free operation.
They are different. When the cylinder extends, the full bore area is subjected to pressure, resulting in greater force; during retraction, the piston rod occupies part of the area, reducing the effective pressure area, so the pulling force is slightly less than the pushing force—this is a standard characteristic.
Non-standard custom strokes are available; standard short-stroke models are well-stocked, while extra-long strokes can be customized. Please refer to the technical specifications table above for detailed data.
Supports a full range of standard mounting styles: foot mount (LB), front flange (FA), rear flange (FB), single clevis (CA), double clevis (CB), and trunnion mount (TCM). Mounting dimensions and hole patterns are fully interchangeable, allowing for direct replacement of major brands such as AirTAC, SMC, and Festo without equipment modifications.
Components can be selected based on actual application requirements. For automated control, a magnetic pneumatic cylinder must be chosen to detect the extended and retracted positions, thereby facilitating automatic equipment control.
Please refer to the product specifications table for a detailed description.
The entire series comes standard with adjustable air cushioning at both ends; the cushioning force can be regulated based on equipment speed and load, effectively reducing impact forces at the end of the stroke, preventing collisions and abnormal noise, protecting both the equipment and the cylinder, and ensuring smoother operation.
The standard operating pressure range is 0.15–1.0 MPa, with a maximum pressure rating of 1.0 MPa, ensuring stable sealing without air leakage. The minimum actuation pressure is just 0.1 MPa, allowing for smooth operation even under low-pressure conditions, free from stick-slip or binding.
Standard cylinders are not recommended for prolonged exposure to lateral forces or off-center loads; they are best suited for straightforward linear push-pull movements. If your equipment involves lateral forces or eccentric loading, I can recommend cylinders with guide rods or suggest adding a guiding mechanism to prevent issues such as piston rod deformation, air leakage, or jamming and damage.
This can be resolved in three ways:
① Adjust the built-in cushioning at both ends of the cylinder;
② Install pneumatic speed control valves to regulate intake and exhaust speeds;
③ For heavy-load applications, install hydraulic shock absorbers;
This completely eliminates impact and abnormal noise, resulting in more stable operation.
Standard models are suitable for general indoor operating conditions. For environments involving moisture, high humidity, or light dust, options are available to upgrade to stainless steel piston rods and corrosion-resistant seals. For cleanroom applications in the food and pharmaceutical industries, custom clean-grade versions can be provided—featuring rust and dust resistance and high corrosion resistance—or dust-resistant cylinders can be selected.
Prolonged exposure to moisture and oil accelerates seal aging and shortens cylinder lifespan. It is recommended to install a filter and an oil-water separator at the inlet; purifying the air supply in this way can significantly extend the cylinder’s service life and ensure long-term leak-free operation.
There is a difference. Horizontal mounting ensures even load distribution and minimizes energy loss; however, in vertical lifting or pulling applications, the load directly affects the output force, so it is necessary to select a cylinder with a larger bore size to avoid insufficient lifting power or sluggish movement.
The cylinder barrel is made of high-strength aluminum alloy, offering a lightweight design, resistance to deformation, and excellent heat dissipation. The piston rod is crafted from high-frequency quenched, chrome-plated 45# steel, ensuring high hardness, wear resistance, and rust protection, while remaining resistant to scoring and bending. Customization using 304 or 316 stainless steel is also available.
Standard units come equipped with wear-resistant NBR seals, offering excellent elasticity and airtightness to prevent leakage during long-term use; for demanding operating conditions involving high temperatures or oil exposure, upgrades to FKM (fluoroelastomer) seals—which provide superior heat and oil resistance—are available.
Under standard operating conditions—with a clean air supply and no off-center loading—it offers years of stable performance and a service life exceeding 3 million cycles. As long as it is not subjected to lateral forces and the air supply remains clean, issues such as air leaks or sticking are virtually non-existent.
We offer sample trials; you only need to cover the shipping costs. Samples of standard in-stock specifications can be dispatched quickly, allowing you to proceed with bulk orders after successful testing and thereby reduce your procurement risk.
Pricing is calculated based on bore size, stroke, and configuration (magnetic/non-magnetic, mounting accessories), offering exceptional value compared to brands of similar quality. Tiered discounts are available for bulk orders and long-term partnerships; the larger the volume, the more favorable the price.
Massive stock of standard specifications available for same-day shipping; custom orders—including non-standard travel lengths and special materials—feature short lead times, with shipment possible in as little as 1–3 days.
The base price applies to the tank unit alone; accessories such as stands, flanges, fittings, and switches can be added as needed. Purchasing a complete set offers better value, though accessories may also be bought separately.
No minimum order quantity; orders as small as a single unit can be shipped. We support small-scale purchases, bulk orders, and long-term stock holding.
Common causes include:
① the presence of water or oil in the air supply causing seal degradation;
② wear resulting from long-term off-center loading;
③ extended service life. Minor air leaks can be remedied by replacing the seal kit, whereas severe wear may require replacing the cylinder entirely; we can provide the necessary repair parts.
Seal repair kits are available for the entire product range, allowing for individual component replacement without the need to replace the entire cylinder, thereby saving on maintenance costs.
Brand-new cylinders come with a standard warranty; in the event of quality issues arising from normal operating conditions—and excluding man-made damage—we provide free replacement or repair, along with dedicated one-on-one technical support throughout the process.
Certainly. If you simply take photos of the entire old cylinder, its nameplate, and the mounting dimensions, I can accurately match the exact model for you—guaranteeing a direct replacement that fits the existing setup without requiring any equipment modifications.
Pneumatic Manufacturers in China
EN 
AR 
ES 
RU 
