As core actuating components of pneumatic systems,
these units utilize compressed air to perform reciprocating push-pull motions.
They offer a wide range of bore sizes and stroke lengths,
support diverse mounting configurations, and are extensively used
in various types of automated machinery and equipment.
20 years of experience in the manufacturing industry, delivering custom solutions tailored to your exact specifications and production requirements.
20+ Years ExperienceThe quality we deliver rivals that of major brands, as we strictly adhere to the technical standards of leading domestic and international labels.
ISO-Aligned QualityLocated in Liushi, Yueqing, Wenzhou, Zhejiang Province, China, our company boasts a comprehensive product component supply chain, advanced high-end equipment, and a long-standing manufacturing heritage.
Direct Factory PricingKey selection parameters include pneumatic cylinder bore size, stroke, port size, pressure range, operating environment, and materials.
1. ISO 6430 standard cylinder;
2. The piston seal features a special double-acting design that is compact and offers oil-retention capabilities;
3. Tie-rod construction: the front and rear end caps are connected to the aluminum barrel via tie rods, ensuring high reliability;
4. Compared to ISO 15552 standard cylinders, the SC series is shorter for the same bore size;
5. Smooth cushion adjustment;
6. Optional magnetic piston allows for convenient and flexible sensor installation;
7. A wide range of cylinder specifications and mounting accessories is available;
8. High-temperature resistant seal material allows for an operating temperature range of 0–150°C.
| Bore Size (Inner Diameter mm) | 32 | 40 | 50 | 63 | 80 | 100 | 125 | 160 | 200 | 250 |
|---|---|---|---|---|---|---|---|---|---|---|
| Action Type | Double Acting | |||||||||
| Working Medium | Air (filtered through 40μm or above filter) | |||||||||
| Temperatura de trabajo | -20℃ ~ +70℃ | |||||||||
| Operating Pressure Range | 0.15 ~ 1.0 MPa | |||||||||
| Proof Pressure | 1.5 MPa | |||||||||
| Operating Speed Range (mm/s) | 30 ~ 800 | |||||||||
| Cushion Type | Adjustable Pneumatic Cushion | |||||||||
| Cushion Stroke (mm) | 21 | 21 | 21 | 21 | 28 | 29 | 28 | 29 | 33 | 40 |
| Allowable Max Stroke (mm) | 2000 | |||||||||
| Max Stroke (mm) | 1000 | 1200 | 1200 | 1500 | 1500 | 1500 | 1500 | 1500 | 1500 | 1500 |
| Design Feature | Tie-rod type, with pneumatic cushion at both ends | |||||||||
| Piston Rod Dia. (mm) | 12 | 16 | 20 | 20 | 25 | 25 | 32 | 32 | 40 | 50 |
| Piston Rod End Thread | M10*1.25 | M12*1.25 | M16*1.5 | M16*1.5 | M20*1.5 | M20*1.5 | M27*2.0 | M36*2.0 | M36*2.0 | M42*2.0 |
| Port Thread | PT1/8 | PT1/4 | PT1/4 | PT1/4 | PT3/8 | PT3/8 | PT1/2 | PT1/2 | PT3/4 | PT1 |
| Note: Port thread optional PT thread, G thread, NPT thread. Please contact us for other special requirements. | ||||||||||
Generated Order Code:
Notes:
1. Blank means standard configuration, no code required for ordering.
2. Adjustable Stroke only available for SCJ; Second Stroke only available for SCT multi-position model.
3. Max bore size for SCT model is 100; Max stroke for bore 32 is 500.
4. For double rod models SCD / SCJ / BSCD, only Blank, LB, FA, TC mounting are available. FB, CA, CB are disabled.
5. Solenoid parameters only available for SCF model with valve.
▲ For non-standard stroke or special requirements, please contact sales.
| Bore Size (Inner Diameter mm) | 32 | 40 | 50 | 63 | 80 | 100 |
|---|---|---|---|---|---|---|
| Action Type | Double Acting | |||||
| Working Medium | Air (filtered through 40μm or above filter) | |||||
| Temperatura de trabajo | -20℃ ~ +70℃ | |||||
| Operating Pressure Range | 0.15 ~ 1.0 MPa | |||||
| Proof Pressure | 1.5 MPa | |||||
| Operating Speed Range | 30 ~ 800 mm/s | |||||
| Cushion Type | Adjustable Pneumatic Cushion | |||||
| Cushion Stroke (mm) | 21 | 21 | 21 | 21 | 28 | 29 |
| Max Stroke (mm) | 1000 | 1200 | 1200 | 1500 | 1500 | 1500 |
| Design Feature | Tie-rod type, with pneumatic cushion at both ends | |||||
| Piston Rod Dia. (mm) | 12 | 16 | 20 | 20 | 25 | 25 |
| Piston Rod End Thread | M10×1.25 | M12×1.25 | M16×1.5 | M16×1.5 | M20×1.5 | M20×1.5 |
| Port Thread | PT1/8 | PT1/4 | PT1/4 | PT3/8 | PT3/8 | PT1/2 |
| Note: Port thread optional PT thread, G thread, NPT thread. Please contact us for other special requirements. | ||||||
Generated Order Code:
Notes:
1. Blank means standard configuration, no code required for ordering.
2. Adjustable Stroke only available for SUJ model; disabled for other types.
3. SUD and SUJ double rod models only support Blank, LB, FA, TC. FB, CA, CB are disabled.
4. Reed Switch can only be selected when Magnet Code = S (with magnet).
Additional specifications available: SUF standard double-acting pneumatic cylinder with valve;SULB standard double-acting type with rear-cap lock; SULF standard double-acting type with front-cap lock. Please contact us for details.
▲ For non-standard stroke or special requirements, please contact sales.
| Bore Size (Inner Diameter mm) | 32 | 40 | 50 | 63 | 80 | 100 | 125 | 160 | 200 |
|---|---|---|---|---|---|---|---|---|---|
| Action Type | Double Acting | ||||||||
| Working Medium | Air (filtered through 40μm or above filter) | ||||||||
| Temperatura de trabajo | -20℃ ~ +70℃ | ||||||||
| Operating Pressure Range | 0.15 ~ 1.0 MPa | ||||||||
| Proof Pressure | 1.5 MPa | ||||||||
| Operating Speed Range | 30 ~ 800 mm/s | 30 ~ 500 mm/s | |||||||
| Cushion Type | Adjustable Pneumatic Cushion | ||||||||
| Cushion Stroke (mm) | 21 | 21 | 21 | 21 | 28 | 29 | 28 | 40 | 40 |
| Max Stroke (mm) | 1000 | 1200 | 1200 | 1200 | 1500 | 1500 | 1500 | 1500 | 1500 |
| Design Feature | Tie-rod type, with pneumatic cushion at both ends | ||||||||
| Piston Rod Dia. (mm) | 12 | 16 | 20 | 20 | 25 | 25 | 32 | 40 | 50 |
| Piston Rod End Thread | M10×1.25 | M12×1.25 | M16×1.5 | M16×1.5 | M20×1.5 | M20×1.5 | M27×2.0 | M36×2.0 | M42×2.0 |
| Port Thread | PT1/8 | PT1/4 | PT1/4 | PT3/8 | PT3/8 | PT1/2 | PT1/2 | PT3/4 | PT3/4 |
| Note: Port thread optional PT thread, G thread, NPT thread. Please contact us for other special requirements. | |||||||||
Generated Order Code:
Notes:
1. Blank means standard configuration, no code required for ordering.
2. Adjustable Stroke is only available for SIJ double rod adjustable stroke model; other models will be greyed out.
3. For SID and SIJ double rod series, mounting types FB, CA, CB, CR are disabled and greyed out.
4. Reed switch can only be selected when magnet code "S - With Magnet" is chosen; reed switch will be greyed out if no magnet selected.
5. Seal material blank = TPU; TR dust seal has been removed.
Additional specifications available:
SIF standard double-acting pneumatic cylinder with valve;
SILB standard double-acting cylinder with rear-cap lock;
SILF standard double-acting cylinder with front-cap lock.
Please contact us for details.
▲ For non-standard stroke or special requirements, please contact sales.
| Parameter Category | Descripción |
|---|---|
| Derivative Type | SAU Double-acting, SAUD Double-shaft, SAUJ Double-shaft Adj Stroke, SAUF Built-in Valve |
| Action Type | Double-acting |
| Medium | Dry & Clean Compressed Air(Filter ≥40μm) |
| Operating Pressure | 0.15~1.0MPa (22~145psi) (1.5~10.0bar) |
| Proof Pressure | 1.5MPa (215psi) (15bar) |
| Operating Temp | -20℃ ~ 70℃ |
| Speed Range | (Bore 32~100: 30~800mm/s) |
| Buffer | Adjustable Air Cushion |
| Seal Material | NBR Nitrile(Standard); Optional FKM Fluororubber for High Temp |
| Barrel Material | Al Alloy(Standard); Optional 304SS,316SS,Steel |
| Piston Rod Material | 45# Steel Hard Chrome Plated |
| SC Mounting | Basic(default),FA Front Flange,FB Rear Flange,CA Single Clevis,CB Double Clevis,LB Bracket |
| SCD/SCJ Mounting | Basic(default),FA Front Flange,LB Bracket |
| Rod End Fitting | I-type,Y-type,Floating Joint,Rod Eye |
| Double-shaft Adj Stroke(mm) | 10,20,30,40,50,75,100 |
| Sensor Options | CMSG, DMSG, EMSG |
| Magnet Code | Blank=No Magnet; Add S for Magnet Equipped |
Please contact us for custom requirements regarding non-standard technical specifications.
| Bore (mm) | Piston Rod OD (mm) | Port Size | Buffer Stroke (mm) | Standard Stroke (mm) | Max Stroke (mm) | Allowable Stroke (mm) |
|---|---|---|---|---|---|---|
| 32 | 12 | PT1/8 | 21 | 25,50,75,80,100,125,150,160,175,200,250,300,350,400,450,500 | 1000 | 1800 |
| 40 | 16 | PT1/4 | 21 | 25,50,75,80,100,125,150,160,175,200,250,300,350,400,450,500,600,700,800,900,1000 | 1200 | 1800 |
| 50 | 20 | PT1/4 | 21 | 25,50,75,80,100,125,150,160,175,200,250,300,350,400,450,500,600,700,800,900,1000 | 1200 | 1800 |
| 63 | 20 | PT3/8 | 21 | 25,50,75,80,100,125,150,160,175,200,250,300,350,400,450,500,600,700,800,900,1000 | 1500 | 1800 |
| 80 | 25 | PT3/8 | 28 | 25,50,75,80,100,125,150,160,175,200,250,300,350,400,450,500,600,700,800,900,1000 | 1500 | 1800 |
| 100 | 25 | PT1/2 | 29 | 25,50,75,80,100,125,150,160,175,200,250,300,350,400,450,500,600,700,800,900,1000 | 1500 | 1800 |
| Note: Optional port thread: PT, G, NPT. Contact us for other special strokes. | ||||||
| Parameter Category | Descripción |
|---|---|
| Derivative Type | SAI Double-acting, SAID Double-shaft, SAIJ Double-shaft Adj Stroke, SAIL Lock Type, SAIF Built-in Valve |
| Action Type | Double-acting |
| Medium | Dry & Clean Compressed Air(Filter ≥40μm) |
| Operating Pressure | 0.15~1.0MPa (22~145psi) (1.5~10.0bar) |
| Proof Pressure | 1.5MPa (215psi) (15bar) |
| Operating Temp | -20℃ ~ 70℃ |
| Speed Range | (Bore 32~100: 30~800mm/s) (Bore 125~200: 30~500mm/s) |
| Buffer | Adjustable Air Cushion |
| Seal Material | NBR Nitrile(Standard); Optional FKM Fluororubber for High Temp |
| Barrel Material | Al Alloy(Standard); Optional 304SS,316SS,Steel |
| Piston Rod Material | 45# Steel Hard Chrome Plated |
| SC Mounting | Basic(default),FA Front Flange,FB Rear Flange,CA Single Clevis,CB Double Clevis,LB Bracket,TC Trunnion,TCM1 Trunnion Mount,FTC,CR,TCM2 |
| SCD/SCJ Mounting | Basic(default),FA Front Flange,LB Bracket,TC Trunnion,TCM1 Trunnion Mount,FTC,TCM2 |
| Rod End Fitting | I-type,Y-type,Floating Joint,Rod Eye |
| Double-shaft Adj Stroke(mm) | 10,20,30,40,50,75,100 |
| Sensor Options | CMSE, DMSE |
| Magnet Code | Blank=No Magnet; Add S for Magnet Equipped |
Please contact us for custom requirements regarding non-standard technical specifications.
| Bore (mm) | Piston Rod OD (mm) | Port Size | Buffer Stroke (mm) | Standard Stroke (mm) | Max Stroke (mm) | Allowable Stroke (mm) |
|---|---|---|---|---|---|---|
| 32 | 12 | PT1/8 | 27 | 25,50,75,80,100,125,150,160,175,200,250,300,350,400,450,500 | 1000 | 1800 |
| 40 | 16 | PT1/4 | 27 | 25,50,75,80,100,125,150,160,175,200,250,300,350,400,450,500,600,700,800 | 1200 | 1800 |
| 50 | 20 | PT1/4 | 30 | 25,50,75,80,100,125,150,160,175,200,250,300,350,400,450,500,600,700,800,900,1000 | 1200 | 1800 |
| 63 | 20 | PT3/8 | 30 | 25,50,75,80,100,125,150,160,175,200,250,300,350,400,450,500,600,700,800,900,1000 | 1500 | 1800 |
| 80 | 25 | PT3/8 | 36 | 25,50,75,80,100,125,150,160,175,200,250,300,350,400,450,500,600,700,800,900,1000 | 1500 | 1800 |
| 100 | 25 | PT1/2 | 36 | 25,50,75,80,100,125,150,160,175,200,250,300,350,400,450,500,600,700,800,900,1000 | 1500 | 1800 |
| 125 | 32 | PT1/2 | 40 | 25,50,75,80,100,125,150,160,175,200,250,300,350,400,450,500,600,700,800,900,1000 | 1500 | 1800 |
| 160 | 40 | PT3/4 | 50 | 25,50,75,80,100,125,150,160,175,200,250,300,350,400,450,500,600,700,800,900,1000 | 1500 | 2000 |
| 200 | 40 | PT3/4 | 50 | 25,50,75,80,100,125,150,160,175,200,250,300,350,400,450,500,600,700,800,900,1000 | 1500 | 2000 |
| Note: Optional port thread: PT, G, NPT. Contact us for other special strokes. | ||||||
| Parameter Category | Descripción |
|---|---|
| Derivative Type | SE Double-acting, SED Double-shaft, SEJ Double-shaft Adj Stroke, BSE Locking Type |
| Action Type | Double-acting |
| Medium | Dry & Clean Compressed Air(Filter ≥40μm) |
| Operating Pressure | 0.15~1.0MPa (22~145psi) (1.5~10.0bar) |
| Proof Pressure | 1.5MPa (215psi) (15bar) |
| Operating Temp | -20℃ ~ 70℃ |
| Speed Range | (Bore 32~100:30~800mm/s) (Bore125:30~500mm/s) |
| Buffer | Adjustable Air Cushion |
| Seal Material | NBR Nitrile(Standard); Optional FKM Fluororubber for High Temp |
| Barrel Material | Al Alloy(Standard); Optional 304SS,316SS,Steel |
| Piston Rod Material | 45# Steel Hard Chrome Plated |
| Mounting | Basic(default),FA Front Flange,FB Rear Flange,CA Single Clevis,CB Double Clevis,LB Bracket,CR,FTC,TCM1,TC,TCM2 |
| Rod End Fitting | I-type,Y-type,Floating Joint,Rod Eye |
| Double-shaft Adj Stroke(mm) | 10,20,30,40,50,75,100 |
| Sensor Options | CMSE, DMSE |
| Magnet Code | Blank=No Magnet; Add S for Magnet Equipped |
Please contact us for custom requirements regarding non-standard technical specifications.
| Bore (mm) | Piston Rod OD (mm) | Port Size | Buffer Stroke (mm) | Standard Stroke (mm) | Max Stroke (mm) | Allowable Stroke (mm) |
|---|---|---|---|---|---|---|
| 32 | 12 | PT1/8 | 27 | 25,50,75,80,100,125,150,160,175,200,250,300,350,400,450,500 | 1000 | 1800 |
| 40 | 16 | PT1/4 | 27 | 25,50,75,80,100,125,150,160,175,200,250,300,350,400,450,500,600,700,800,900 | 1200 | 1800 |
| 50 | 20 | PT1/4 | 30 | 25,50,75,80,100,125,150,160,175,200,250,300,350,400,450,500,600,700,800,900,1000 | 1200 | 1800 |
| 63 | 20 | PT3/8 | 30 | 25,50,75,80,100,125,150,160,175,200,250,300,350,400,450,500,600,700,800,900,1000 | 1500 | 1800 |
| 80 | 25 | PT3/8 | 36 | 25,50,75,80,100,125,150,160,175,200,250,300,350,400,450,500,600,700,800,900,1000 | 1500 | 1800 |
| 100 | 25 | PT1/2 | 36 | 25,50,75,80,100,125,150,160,175,200,250,300,350,400,450,500,600,700,800,900,1000 | 1500 | 1800 |
| 125 | 32 | PT1/2 | 40 | 25,50,75,80,100,125,150,160,175,200,250,300,350,400,450,500,600,700,800,900,1000 | 1500 | 1800 |
| Note: Optional port thread: PT, G, NPT. Contact us for other special strokes. | ||||||
| Parameter Category | Descripción |
|---|---|
| Derivative Type | JSI Double-acting, JSID Double-shaft, JSIJ Double-shaft Adj Stroke |
| Action Type | Double-acting |
| Medium | Dry & Clean Compressed Air(Filter ≥40μm) |
| Operating Pressure | 0.15~1.0MPa (22~145psi) (1.5~10.0bar) |
| Proof Pressure | 1.5MPa (215psi) (15bar) |
| Operating Temp | -20℃ ~ 70℃ |
| Speed Range | (Bore 32~100:30~800mm/s) |
| Buffer | Adjustable Air Cushion |
| Seal Material | NBR Nitrile(Standard); Optional FKM Fluororubber for High Temp |
| Barrel Material | Al Alloy(Standard); Optional 304SS,316SS,Steel |
| Piston Rod Material | 45# Steel Hard Chrome Plated |
| Mounting | Basic(default),FA Front Flange,FB Rear Flange,CA Single Clevis,CB Double Clevis,LB Bracket,CR,TCM1,TC,TCM2 |
| Rod End Fitting | I-type,Y-type,Floating Joint,Rod Eye |
| Double-shaft Adj Stroke(mm) | 10,20,30,40,50,75,100 |
| Sensor Options | CMSE, DMSE |
| Magnet Code | Blank=No Magnet; Add S for Magnet Equipped |
Please contact us for custom requirements regarding non-standard technical specifications.
| Bore (mm) | Piston Rod OD (mm) | Port Size | Buffer Stroke (mm) | Standard Stroke (mm) | Max Stroke (mm) | Allowable Stroke (mm) |
|---|---|---|---|---|---|---|
| 32 | 12 | PT1/8 | 20 | 25,50,75,80,100,125,150,160,175,200,250,300,350,400,450,500 | 1000 | 1800 |
| 40 | 16 | PT1/4 | 20.5 | 25,50,75,80,100,125,150,160,175,200,250,300,350,400,450,500,600,700,800,900,1000 | 1200 | 1800 |
| 50 | 20 | PT1/4 | 20.5 | 25,50,75,80,100,125,150,160,175,200,250,300,350,400,450,500,600,700,800,900,1000 | 1200 | 1800 |
| 63 | 20 | PT3/8 | 20.5 | 25,50,75,80,100,125,150,160,175,200,250,300,350,400,450,500,600,700,800,900,1000 | 1500 | 1800 |
| 80 | 25 | PT3/8 | 29 | 25,50,75,80,100,125,150,160,175,200,250,300,350,400,450,500,600,700,800,900,1000 | 1500 | 1800 |
| 100 | 30 | PT1/2 | 29 | 25,50,75,80,100,125,150,160,175,200,250,300,350,400,450,500,600,700,800,900,1000 | 1500 | 1800 |
| 125 | 32 | PT1/2 | 33 | 25,50,75,80,100,125,150,160,175,200,250,300,350,400,450,500,600,700,800,900,1000 | 1500 | 1800 |
| Note: Optional port thread: PT, G, NPT. Contact us for other special strokes. | ||||||
| Parameter Category | Descripción |
|---|---|
| Derivative Type | SG Double-acting(Steel Tube), SGC Double-acting(Al Tube), SGD Double-shaft(Steel Tube), SGCD Double-shaft(Al Tube), SGCJ Double-shaft Adj Stroke(Steel Tube), SGCJJ Double-shaft Adj Stroke(Al Tube) |
| Action Type | Double-acting |
| Medium | Dry & Clean Compressed Air(Filter ≥40μm) |
| Operating Pressure | 0.15~1.0MPa (22~145psi) (1.5~10.0bar) |
| Proof Pressure | 1.5MPa (215psi) (15bar) |
| Operating Temp | -20℃ ~ 70℃ |
| Speed Range | (Bore 32~100:30~500mm/s) |
| Buffer | Adjustable Air Cushion |
| Seal Material | NBR Nitrile(Standard); Optional FKM Fluororubber for High Temp |
| Barrel Material | Al Alloy(Standard); Optional 304SS,316SS,Steel |
| Piston Rod Material | 45# Steel Hard Chrome Plated |
| Mounting | Basic(default),FA Front Flange,FB Rear Flange,CA Single Clevis,CB Double Clevis,LB Bracket,TCM1,TC,TCM2 |
| Rod End Fitting | I-type,Y-type,Rod Eye |
| Double-shaft Adj Stroke(mm) | 10,20,30,40,50,75,100 |
| Sensor Options | CMSG, DMSG, EMSG |
| Magnet Code | Blank=No Magnet; Add S for Magnet Equipped |
Please contact us for custom requirements regarding non-standard technical specifications.
| Bore (mm) | Piston Rod OD (mm) | Port Size | Buffer Stroke (mm) | Standard Stroke (mm) | Max Stroke (mm) | Allowable Stroke (mm) |
|---|---|---|---|---|---|---|
| 125 | 32 | PT1/2 | 40 | 25,50,75,80,100,125,150,160,175,200,250,300,350,400,450,500,600,700,800,900,1000 | 1500 | 2000 |
| 160 | 40 | PT3/4 | 50 | 25,50,75,80,100,125,150,160,175,200,250,300,350,400,450,500,600,700,800,900,1000 | 1500 | 2000 |
| 200 | 40 | PT3/4 | 50 | 25,50,75,80,100,125,150,160,175,200,250,300,350,400,450,500,600,700,800,900,1000 | 1500 | 2000 |
| 250 | 50 | PT1 | 60 | 25,50,75,80,100,125,150,160,175,200,250,300,350,400,450,500,600,700,800,900,1000 | 1500 | 2000 |
| Note: Optional port thread: PT, G, NPT. Contact us for other special strokes. | ||||||
| Parameter Category | Descripción |
|---|---|
| Derivative Type | QGA Non-cushioned Pneumatic Cylinder, QGB Cushioned Cylinder |
| Action Type | Double-acting |
| Medium | Dry & Clean Compressed Air(Filter ≥40μm) |
| Operating Pressure | 0.1~1.0MPa (22~145psi) (1.5~10.0bar) |
| Proof Pressure | 1.5MPa (215psi) (15bar) |
| Operating Temp | -20℃ ~ 70℃ |
| Speed Range | 50~500mm/s |
| Buffer | Adjustable Air Cushion |
| Seal Material | NBR Nitrile(Standard); Optional FKM Fluororubber for High Temp |
| Barrel Material | Al Alloy(Bore 32~100mm); Optional 304SS,316SS,Steel(Bore 125~400mm) |
| Piston Rod Material | 45# Steel Hard Chrome Plated |
| Mounting | Basic(default),FA Front Flange,FB Rear Flange,CA Single Clevis,CB Double Clevis,LB Bracket,TCM1,TC,TCM2,TA |
| Rod End Fitting | I-type,Y-type,Rod Eye,Floating Joint |
| Double-shaft Adj Stroke(mm) | 10,12,15,20,25,40,50,55,60 |
| Sensor Options | CS1-J,CS1-F,CS1-U,CS1-G,D-273 |
| Magnet Code | Blank=No Magnet; Add S for Magnet Equipped |
Please contact us for custom requirements regarding non-standard technical specifications.
| Bore (mm) | Piston Rod OD (mm) | Port Size | Buffer Stroke (mm) | Standard Stroke (mm) | Max Stroke (mm) | Allowable Stroke (mm) |
|---|---|---|---|---|---|---|
| 32 | 24.5 | PT1/8 | 12 | 25,50,100,125,150,200,250,320,400,500 | 500 | 2000 |
| 40 | 35.5 | PT1/4 | 15 | 25,50,100,125,150,200,250,320,400,500 | 500 | 2000 |
| 50 | 40.5 | PT3/8 | 20 | 25,50,100,125,150,200,250,320,400,500,600 | 600 | 2000 |
| 63 | 40.5 | PT3/8 | 20 | 25,50,100,125,150,200,250,320,400,500,600 | 600 | 2000 |
| 80 | 46.5 | PT1/2 | 25 | 25,50,100,125,150,200,250,320,400,500,600,700,800,900,1000 | 1000 | 2000 |
| 100 | 51.5 | PT1/2 | 25 | 25,50,100,125,150,200,250,320,400,500,600,700,800,900,1000 | 1000 | 2000 |
| 125 | 60 | G1/2 | 40 | 25,50,100,125,150,200,250,320,400,500,600,700,800,900,1000,1100,1200 | 1200 | 2000 |
| 160 | 65 | G3/4 | 40 | 25,50,100,125,150,200,250,320,400,500,600,700,800,900,1000,1100,1200,1500 | 1500 | 2000 |
| 200 | 75 | G3/4 | 50 | 25,50,100,125,150,200,250,320,400,500,600,700,800,900,1000,1100,1200,1500,1800,2000 | 2000 | 2000 |
| 250 | 90 | G3/4 | 55 | 25,50,100,125,150,200,250,320,400,500,600,700,800,900,1000,1100,1200,1500,1800,2000 | 2000 | 2000 |
| 320 | 110 | G3/4 | 60 | 25,50,100,125,150,200,250,320,400,500,600,700,800,900,1000,1100,1200,1500,1800,2000 | 2000 | 2000 |
| 400 | 125 | G3/4 | 60 | 25,50,100,125,150,200,250,320,400,500,600,700,800,900,1000,1100,1200,1500,1800,2000 | 2000 | 2000 |
| Note: Optional port thread: PT, G, NPT. Contact us for other special strokes. | ||||||
| Parameter Category | Descripción |
|---|---|
| Cylinder Type | JMB without magnet ring, JMDB built-in magnet ring |
| Action Type | Double-acting |
| Medium | Dry & Clean Compressed Air(Filter ≥40μm) |
| Operating Pressure | 0.05~0.7MPa |
| Proof Pressure | 1.0MPa |
| Operating Temp | 5℃ ~ 60℃ |
| Speed Range | 50~500mm/s |
| Buffer | Non-adjustable air cushion + rubber buffer combined |
| Seal Material | NBR Nitrile(Standard); Optional FKM Fluororubber for High Temp |
| Barrel Material | Al Alloy; Optional 304SS,316SS,Steel |
| Piston Rod Material | 45# Steel Hard Chrome Plated |
| Mounting | Side flange, axial foot mount, basic type, both-side tapped holes |
| Rod End Fitting | I-type,Y-type,Rod Eye,Floating Joint |
| Sensor Options | M9N, M9P, M9B |
Please contact us for custom requirements regarding non-standard technical specifications.
| Bore (mm) | Piston Rod OD (mm) | Port Size | Standard Stroke (mm) | Max Stroke (mm) |
|---|---|---|---|---|
| 32 | 10 | PT1/8 | 25,50,75,100,125,150,175,200,250,300 | 300 |
| 40 | 14 | PT1/8 | 25,50,75,100,125,150,175,200,250,300 | 300 |
| 45 | 14 | PT1/8 | 25,50,75,100,125,150,175,200,250,300 | 300 |
| 50 | 18 | PT1/8 | 25,50,75,100,125,150,175,200,250,300,350,400 | 400 |
| 56 | 18 | PT1/8 | 25,50,75,100,125,150,175,200,250,300,350,400 | 400 |
| 63 | 18 | PT1/4 | 25,50,75,100,125,150,175,200,250,300,350,400 | 400 |
| 67 | 18 | PT1/4 | 25,50,75,100,125,150,175,200,250,300,350,400 | 400 |
| 80 | 22 | PT1/4 | 25,50,75,100,125,150,175,200,250,300,350,400,450,500 | 500 |
| 85 | 22 | PT1/4 | 25,50,75,100,125,150,175,200,250,300,350,400,450,500 | 500 |
| 100 | 26 | PT3/8 | 25,50,75,100,125,150,175,200,250,300,350,400,450,500 | 500 |
| Note: Optional port thread: PT, G, NPT. Contact us for other special strokes. | ||||
| Parameter Type | Descripción |
|---|---|
| Cylinder Type | MB-Z single rod double acting, MBW-Z double rod double acting, MBK-Z, MBKW-Z, MBB, MBY-Z |
| Action Type | Single rod double acting |
| Medium | Dry clean compressed air (filtered ≥40μm filter) |
| Operating Pressure | 0.05~1.0MPa |
| Proof Pressure | 1.5MPa |
| Operating Temp | -10℃ ~70℃ |
| Speed Range | 50~1000mm/s |
| Cushion Type | Air cushion or rubber cushion |
| Seal Material | NBR Nitrile rubber (Std); Optional FKM fluoro rubber for high temp |
| Barrel Material | Al alloy; Optional 304 SS,316 SS,steel |
| Rod Material | 45# steel hard chrome plating |
| Mounting Type | Basic, axial foot, rodless side flange, single clevis, double clevis, intermediate trunnion |
| Rod End Accessory | Single rod eye joint, double rod eye joint |
| Sensor Option | M9N, M9P, M9B |
Please contact us for custom requirements regarding non-standard technical specifications.
| Bore (mm) | Rod OD (mm) | Port Size | Standard Stroke (mm) | Stroke Range (mm) | Max Stroke (mm) |
|---|---|---|---|---|---|
| 32 | 12 | PT1/8 | 25,50,75,100,125,150,175,200,250,300,350,400,450,500 | 1000 | 2700 |
| 40 | 16 | PT1/4 | 25,50,75,100,125,150,175,200,250,300,350,400,450,500 | 1800 | 2700 |
| 50 | 20 | PT1/4 | 25,50,75,100,125,150,175,200,250,300,350,400,450,500,600 | 1800 | 2700 |
| 63 | 20 | PT3/8 | 25,50,75,100,125,150,175,200,250,300,350,400,450,500,600 | 1800 | 2700 |
| 80 | 25 | PT3/8 | 25,50,75,100,125,150,175,200,250,300,350,400,450,500,600,700,800 | 1800 | 2700 |
| 100 | 30 | PT1/2 | 25,50,75,100,125,150,175,200,250,300,350,400,450,500,600,700,800 | 1800 | 2700 |
| 125 | 32 | PT1/2 | 25,50,75,100,125,150,175,200,250,300,350,400,450,500,600,700,800,900,1000 | 2000 | 2700 |
| Note: Thread options: PT, G, NPT. Please contact us for special stroke requirements. | |||||
| Parameter Type | Descripción |
|---|---|
| Cylinder Type | CA2-Z, CA2K, CBA2, CA2BH, CA2Y-Z |
| Action Type | Single rod double acting |
| Medium | Dry clean compressed air (filtered ≥40μm filter) |
| Operating Pressure | 0.05~1.0MPa |
| Proof Pressure | 1.5MPa |
| Operating Temp | -10℃ ~70℃ |
| Speed Range | 50~500mm/s |
| Cushion Type | Air cushion or rubber cushion |
| Seal Material | NBR Nitrile rubber (Std); Optional FKM fluoro rubber for high temp |
| Barrel Material | Al alloy; Optional 304 SS,316 SS,steel |
| Rod Material | 45# steel hard chrome plating |
| Mounting Type | Basic, axial foot, rodless side flange, single clevis, double clevis, intermediate trunnion, rod side flange |
| Rod End Accessory | Single rod eye joint, double rod eye joint |
| Sensor Option | M9N, M9P, M9B |
Please contact us for custom requirements regarding non-standard technical specifications.
| Bore (mm) | Rod OD (mm) | Port Size | Standard Stroke (mm) | Stroke Range (mm) |
|---|---|---|---|---|
| 40 | 16 | PT1/4 | 25,50,75,100,125,150,175,200,250,300,350,400,450,500 | 1~1800 |
| 50 | 20 | PT3/8 | 25,50,75,100,125,150,175,200,250,300,350,400,450,500,600 | 1~1800 |
| 63 | 20 | PT3/8 | 25,50,75,100,125,150,175,200,250,300,350,400,450,500,600 | 1~1800 |
| 80 | 25 | PT1/2 | 25,50,75,100,125,150,175,200,250,300,350,400,450,500,600,700,800 | 1~1800 |
| 100 | 30 | PT1/2 | 25,50,75,100,125,150,175,200,250,300,350,400,450,500,600,700,800 | 1~1800 |
| Note: Thread options: PT, G, NPT. Please contact us for special stroke requirements. | ||||
| Parameter Type | Descripción |
|---|---|
| Cylinder Type | CS1, CS1W, SDS1, CDS1W, CS1B, CS1BN, CS1BH, CDS1B |
| Action Type | Lubricated, Non-lubricated, Air-oil combined |
| Medium | Dry clean compressed air (filtered ≥40μm filter) & turbine oil |
| Operating Pressure | 0.05~0.97MPa |
| Proof Pressure | 1.57MPa |
| Operating Temp | 0℃ ~70℃ |
| Speed Range | (Lubricated & Non-lubricated:50~500mm/s) (Air-oil combined:0.5~200mm/s) |
| Cushion Type | Air cushion or Non-cushion |
| Seal Material | NBR Nitrile rubber (Std); Optional FKM fluoro rubber for high temp |
| Barrel Material | Al alloy; Optional 304 SS,316 SS,steel |
| Rod Material | 45# steel hard chrome plating |
| Mounting Type | Basic, axial foot, rodless side flange, single clevis, double clevis, intermediate trunnion, rod side flange |
| Rod End Accessory | I-joint, Y-joint, rod eye, floating joint, single knuckle joint, double knuckle joint, protective boot |
| Magnetic Switch | M9N, M9P, M9B |
Please contact us for custom requirements regarding non-standard technical specifications.
| Bore (mm) | Rod OD (mm) | Port Size | Standard Stroke (mm) | Max Stroke (mm) |
|---|---|---|---|---|
| 125 | 36 | PT1/2 | 1~1000 | 1600 |
| 140 | 36 | PT1/2 | 1~1000 | 1600 |
| 160 | 40 | PT3/4 | 1~1200 | 1600 |
| 180 | 45 | PT3/4 | 1~1200 | 2000 |
| 200 | 50 | PT3/4 | 1~1200 | 2000 |
| 250 | 60 | PT1 | 1~1200 | 2400 |
| 300 | 70 | PT1 | 1~1200 | 2400 |
| Note: Thread options: PT, G, NPT. Please contact us for special stroke requirements. | ||||
| Parameter Type | Descripción |
|---|---|
| Cylinder Type | CS2B, CS2L, CS2F, CS2G, CS2C, CS2D, CS2T |
| Action Type | Single Rod, Double Acting |
| Medium | Dry clean compressed air (filtered ≥40μm filter) & turbine oil |
| Operating Pressure | 0.05~0.97MPa |
| Proof Pressure | (1.57MPa for bore:125,140,160) (1.2MPa for bore:180,200,250,320) |
| Operating Temp | 0℃ ~70℃ |
| Speed Range | (50~500mm/s for bore:125,140,160) (50~300mm/s for bore:180,200,250,320) |
| Cushion Type | Air cushion |
| Seal Material | NBR Nitrile rubber (Std); Optional FKM fluoro rubber for high temp |
| Barrel Material | Al alloy; Optional 304 SS,316 SS,steel |
| Rod Material | 45# steel hard chrome plating |
| Mounting Type | Basic, axial foot, rodless side flange, single clevis, double clevis, intermediate trunnion, rod side flange |
| Rod End Accessory | I-joint, Y-joint, rod eye, floating joint, single knuckle joint, double knuckle joint, protective boot |
| Magnetic Switch | M9N, M9P, M9B |
Please contact us for custom requirements regarding non-standard technical specifications.
| Bore (mm) | Rod OD (mm) | Port Size | Standard Stroke (mm) | Max Stroke (mm) |
|---|---|---|---|---|
| 125 | 32 | PT1/2 | 1~1000 | 1600 |
| 140 | 32 | PT1/2 | 1~1000 | 1600 |
| 160 | 38 | PT3/4 | 1~1200 | 1600 |
| 180 | 40 | PT1/2 | 1~1200 | 1569 |
| 200 | 45 | PT1/2 | 1~998 | |
| 250 | 56 | PT3/4 | 1~813 | |
| 320 | 65 | PT3/4 | 1~495 | |
| Note: Thread options: PT, G, NPT. Please contact us for special stroke requirements. | ||||
| Parameter Type | Descripción |
|---|---|
| Cylinder Type | CP96SDB, CP96K |
| Action Type | Single Rod, Double Acting |
| Medium | Dry clean compressed air (filtered ≥40μm filter) & turbine oil |
| Operating Pressure | 0.05~1.0MPa |
| Proof Pressure | 1.5MPa |
| Operating Temp | -20℃ ~70℃ |
| Speed Range | 50~1000mm/s |
| Cushion Type | Double side air cushion + bumper cushion |
| Seal Material | NBR Nitrile rubber (Std); Optional FKM fluoro rubber for high temp |
| Barrel Material | Al alloy; Optional 304 SS,316 SS,steel |
| Rod Material | 45# steel hard chrome plating |
| Mounting Type | Basic, axial foot, rodless side flange, single clevis, double clevis, intermediate trunnion, rod side flange |
| Rod End Accessory | I-joint, Y-joint, rod eye, floating joint, single knuckle joint, double knuckle joint, protective boot |
| Magnetic Switch | M9N, M9P, M9B |
Please contact us for custom requirements regarding non-standard technical specifications.
| Bore (mm) | Rod OD (mm) | Port Size | Standard Stroke (mm) | Max Stroke (mm) |
|---|---|---|---|---|
| 32 | 12 | G1/8 | 25,50,80,100,125,160,200,250,320,400,500 | 20000 |
| 40 | 16 | G1/4 | 25,50,80,100,125,160,200,250,320,400,500 | 20000 |
| 50 | 20 | G1/4 | 25,50,80,100,125,160,200,250,320,400,500,600 | 20000 |
| 63 | 20 | G3/8 | 25,50,80,100,125,160,200,250,320,400,500,600 | 20000 |
| 80 | 25 | G3/8 | 25,50,80,100,125,160,200,250,320,400,500,600,700,800 | 20000 |
| 100 | 25 | G1/2 | 25,50,80,100,125,160,200,250,320,400,500,600,700,800 | 20000 |
| Note: Thread options: PT, G, NPT. Please contact us for special stroke requirements. | ||||
| Parameter Type | Descripción |
|---|---|
| Cylinder Type | C96, C96K, C96Y |
| Action Type | Single Rod, Double Acting |
| Medium | Dry clean compressed air (filtered ≥40μm filter) & turbine oil |
| Operating Pressure | 0.05~1.0MPa |
| Proof Pressure | 1.5MPa |
| Operating Temp | -20℃ ~70℃ |
| Speed Range | 50~1000mm/s |
| Cushion Type | Double side air cushion + bumper cushion |
| Seal Material | NBR Nitrile rubber (Std); Optional FKM fluoro rubber for high temp |
| Barrel Material | Al alloy; Optional 304 SS,316 SS,steel |
| Rod Material | 45# steel hard chrome plating |
| Mounting Type | Basic, axial foot, rodless side flange, single clevis, double clevis, intermediate trunnion, rod side flange |
| Rod End Accessory | I-joint, Y-joint, rod eye, floating joint, single knuckle joint, double knuckle joint, protective boot |
| Magnetic Switch | M9N, M9P, M9B |
Please contact us for custom requirements regarding non-standard technical specifications.
| Bore (mm) | Rod OD (mm) | Port Size | Standard Stroke (mm) | Max Stroke (mm) |
|---|---|---|---|---|
| 32 | 12 | G1/8 | 25,50,80,100,125,160,200,250,320,400,500 | 10000 |
| 40 | 16 | G1/4 | 25,50,80,100,125,160,200,250,320,400,500 | 19000 |
| 50 | 20 | G1/4 | 25,50,80,100,125,160,200,250,320,400,500,600 | 19000 |
| 63 | 20 | G3/8 | 25,50,80,100,125,160,200,250,320,400,500,600 | 19000 |
| 80 | 25 | G3/8 | 25,50,80,100,125,160,200,250,320,400,500,600,700,800 | 19000 |
| 100 | 25 | G1/2 | 25,50,80,100,125,160,200,250,320,400,500,600,700,800 | 19000 |
| 125 | 32 | G1/2 | 25,50,80,100,125,160,200,250,320,400,500,600,700,800,900,1000 | 20000 |
| Note: Thread options: PT, G, NPT. Please contact us for special stroke requirements. | ||||
| Parameter Type | Descripción |
|---|---|
| Cylinder Type | Multiple variants: Contact us |
| Action Type | Single Rod, Double Acting |
| Medium | Dry clean compressed air (filtered ≥40μm filter) & turbine oil |
| Operating Pressure | 0.03~1.2MPa |
| Proof Pressure | 1.2MPa |
| Operating Temp | -20℃ ~80℃ |
| Cushion Type | P: Both ends with elastic bumper; PPV: Both ends with adjustable air cushion; PPS: Both ends with self-adjusting air cushion |
| Note: For other requirements, refer to Festo official documents. Please contact us if you have questions. | |
Please contact us for custom requirements regarding non-standard technical specifications.
| Bore (mm) | Rod OD (mm) | Rod Thread | Cushion Length | Port Size | Standard Stroke (mm) | Max Stroke (mm) |
|---|---|---|---|---|---|---|
| 32 | 12 | M10*1.25 | 17 | G1/8 | 20,25,30,40,50,60,70,80,100,125,150,160,200,250,300,320,400,500 | 2800 |
| 40 | 16 | M12*1.25 | 19 | G1/4 | 20,25,30,40,50,60,70,80,100,125,150,160,200,250,300,320,400,500 | 2800 |
| 50 | 20 | M16*1.5 | 22 | G1/4 | 20,25,30,40,50,60,70,80,100,125,150,160,200,250,300,320,400,500 | 2800 |
| 63 | 20 | M16*1.5 | 22 | G3/8 | 20,25,30,40,50,60,70,80,100,125,150,160,200,250,300,320,400,500 | 2800 |
| 80 | 25 | M20*1.5 | 31 | G3/8 | 20,25,30,40,50,60,70,80,100,125,150,160,200,250,300,320,400,500 | 2800 |
| 100 | 25 | M20*1.5 | 31 | G1/2 | 20,25,30,40,50,60,70,80,100,125,150,160,200,250,300,320,400,500 | 2800 |
| 125 | 32 | M27*2 | 45 | G1/2 | 20,25,30,40,50,60,70,80,100,125,150,160,200,250,300,320,400,500 | 2800 |
| Note: Pipe thread options: PT, G, NPT. Please contact us for special stroke requirements. | ||||||
| Parameter Type | Descripción |
|---|---|
| Cylinder Model | DNC, DNC-KP, DNCKE, DNC-EL, DNC-V1~V6, DNCT |
| Action Type | Single Rod, Double Acting |
| Medium | Dry clean compressed air (filtered ≥40μm filter) & turbine oil |
| Operating Pressure | 0.01~1.2MPa |
| Proof Pressure | 1.2MPa |
| Operating Temp | -20℃ ~80℃ |
| Cushion Type | P: Both ends with elastic bumper; PPV: Both ends with adjustable air cushion; PPS: Both ends with self-adjusting air cushion |
| Note: For other requirements, refer to Festo official documents. Please contact us if you have questions. | |
Please contact us for custom requirements regarding non-standard technical specifications.
| Bore (mm) | Rod OD (mm) | Cushion Length | Port Size | Standard Stroke (mm) | Max Stroke (mm) |
|---|---|---|---|---|---|
| 32 | 12 | 20 | G1/8 | 25,40,50,80,100,125,160,200,250,320,400,500 | 2000 |
| 40 | 16 | 20 | G1/4 | 25,40,50,80,100,125,160,200,250,320,400,500 | 2000 |
| 50 | 20 | 22 | G1/4 | 25,40,50,80,100,125,160,200,250,320,400,500 | 2000 |
| 63 | 20 | 22 | G3/8 | 25,40,50,80,100,125,160,200,250,320,400,500 | 2000 |
| 80 | 25 | 32 | G3/8 | 25,40,50,80,100,125,160,200,250,320,400,500 | 2000 |
| 100 | 25 | 32 | G1/2 | 25,40,50,80,100,125,160,200,250,320,400,500 | 2000 |
| 125 | 32 | 42 | G1/2 | 25,40,50,80,100,125,160,200,250,320,400,500 | 2000 |
| Note: Pipe thread options: PT, G, NPT. Please contact us for special stroke requirements. | |||||
| Parameter Category | Descripción |
|---|---|
| Pneumatic Cylinder Type | Multiple derivative types |
| Action Type | Single rod, double acting |
| Media | Compressed air conform to ISO 8573-1:2010 [7:4:4] |
| Operating Pressure Range | 0.01~1.2MPa |
| Proof Pressure | 1.2MPa |
| Working Temp. | -20°C ~ 80°C |
| Cushion Type | P: Elastic cushion at both ends, PPV: Adjustable air cushion at both ends, PPS: Self-adjust air cushion at both ends |
| Note: For other specs, refer to Festo official docs. Contact us if any questions. | |
Please contact us for custom requirements regarding non-standard technical specifications.
| Bore (mm) | Piston Rod OD (mm) | Cushion Length | Port Size | Standard Stroke (mm) | Max Stroke (mm) |
|---|---|---|---|---|---|
| 32 | 12 | 19 | G1/8 | 10~2000 | 2000 |
| 40 | 16 | 21 | G1/4 | 10~2000 | 2000 |
| 50 | 20 | 23 | G1/4 | 10~2000 | 2000 |
| 63 | 20 | 23 | G3/8 | 10~2000 | 2000 |
| 80 | 25 | 30 | G3/8 | 10~2000 | 2000 |
| 100 | 25 | 30 | G1/2 | 10~2000 | 2000 |
| 125 | 32 | 40 | G1/2 | 10~2000 | 2000 |
| Note: Pipe thread optional: PT, G, NPT. Contact us for other special strokes. | |||||
| Parameter Category | Descripción |
|---|---|
| Pneumatic Cylinder Type | Multiple derivative types |
| Action Type | Single rod, double acting |
| Media | Compressed air conform to ISO 8573-1:2010 [7:4:4] |
| Operating Pressure Range | 0.01~1.2MPa |
| Proof Pressure | 1.2MPa |
| Working Temp. | -20°C ~ 80°C |
| Cushion Type | P: Elastic cushion at both ends, PPV: Adjustable air cushion at both ends, PPS: Self-adjust air cushion at both ends |
| Note: For other specs, refer to Festo official docs. Contact us if any questions. | |
Please contact us for custom requirements regarding non-standard technical specifications.
| Bore (mm) | Piston Rod OD (mm) | Cushion Length | Port Size | Standard Stroke (mm) | Max Stroke (mm) |
|---|---|---|---|---|---|
| 32 | 12 | 17 | G1/8 | 25,40,50,80,100,125,160,200,250,320,400,500 | 2000 |
| 40 | 16 | 19 | G1/4 | 25,40,50,80,100,125,160,200,250,320,400,500 | 2000 |
| 50 | 20 | 22 | G1/4 | 25,40,50,80,100,125,160,200,250,320,400,500 | 2000 |
| 63 | 20 | 22 | G3/8 | 25,40,50,80,100,125,160,200,250,320,400,500 | 2000 |
| 80 | 25 | 31 | G3/8 | 25,40,50,80,100,125,160,200,250,320,400,500 | 2000 |
| 100 | 25 | 31 | G1/2 | 25,40,50,80,100,125,160,200,250,320,400,500 | 2000 |
| 125 | 32 | 45 | G1/2 | 25,40,50,80,100,125,160,200,250,320,400,500 | 2000 |
| Note: Pipe thread optional: PT, G, NPT. Contact us for other special strokes. | |||||
| Parameter Category | Descripción |
|---|---|
| Pneumatic Cylinder Type | Multiple derivative types |
| Action Type | Single rod, double acting |
| Media | Compressed air conform to ISO 8573-1:2010 [7:4:4] |
| Operating Pressure Range | 0.01~1.2MPa |
| Proof Pressure | 1.2MPa |
| Working Temp. | -20°C ~ 80°C |
| Cushion Type | P: Elastic cushion at both ends, PPV: Adjustable air cushion at both ends, PPS: Self-adjust air cushion at both ends |
| Note: For other specs, refer to Festo official docs. Contact us if any questions. | |
Please contact us for custom requirements regarding non-standard technical specifications.
| Bore (mm) | Piston Rod OD (mm) | Cushion Length | Port Size | Standard Stroke (mm) | Max Stroke (mm) |
|---|---|---|---|---|---|
| 32 | 12 | 17 | G1/8 | 25,40,50,80,100,125,160,200,250,320,400,500 | 2000 |
| 40 | 16 | 19 | G1/4 | 25,40,50,80,100,125,160,200,250,320,400,500 | 2000 |
| 50 | 20 | 22 | G1/4 | 25,40,50,80,100,125,160,200,250,320,400,500 | 2000 |
| 63 | 20 | 22 | G3/8 | 25,40,50,80,100,125,160,200,250,320,400,500 | 2000 |
| 80 | 25 | 31 | G3/8 | 25,40,50,80,100,125,160,200,250,320,400,500 | 2000 |
| 100 | 25 | 31 | G1/2 | 25,40,50,80,100,125,160,200,250,320,400,500 | 2000 |
| 125 | 32 | 45 | G1/2 | 25,40,50,80,100,125,160,200,250,320,400,500 | 2000 |
| Note: Pipe thread optional: PT, G, NPT. Contact us for other special strokes. | |||||
| Series | Brand | Standard | Structure Type | Bore Range(mm) | Key Features | Direct Replacement Models |
|---|---|---|---|---|---|---|
| SC | AirTAC | Enterprise Standard | Exposed Tie Rod | 32~250 | Most common type. Exposed tie rod, magnetic switch mountable, cost-effective | SU (Same mounting dimensions); MDBB (Different standard, dimensions not interchangeable) |
| SU | AirTAC | Enterprise Standard | Concealed Tie Rod | 32~200 | Tie rod concealed inside profile, square shape, impact resistance | SC (Direct interchangeable at same bore) |
| SI | AirTAC | ISO 15552 | Non-tie Rod Profile | 32~200 | Square aluminum profile, switch slots on 4 sides, European mounting dimension | SE, SAI, CP96SDB, DSBC (Full ISO15552 series) |
| SAU | AirTAC | ISO 6431 | Non-tie Rod Profile | 32~100 | Old European standard profile cylinder, predecessor of SI, compact structure | SI (New ISO15552); DNC (Festo old European standard) |
| SAI | AirTAC | ISO 15552 | Tie Rod Type | 32~200 | ISO15552 tie rod cylinder, high strength, complete mounting accessories | SI, SE, CP96SDB, DSBC |
| SE | AirTAC | ISO 15552 | Non-tie Rod Profile | 32~125 | Square aluminum non-tie rod, comply with VDMA standard, good anti-side-load performance | SI, SAI, CP96SDB, DSBC |
| JSI | AirTAC | JIS Japanese Standard | Non-tie Rod Profile | 32~100 | JIS standard, shorter overall length at same bore, Miki style profile | MDBB; JMDBB |
| SG | AirTAC | ISO 15552 | Large Bore Tie Rod | 125~250 | Large bore ISO cylinder, steel/aluminum tube optional, heavy-duty tie rod structure | DSBG; CDS1B, CDS2B |
| Series | Brand | Standard | Structure Type | Bore Range(mm) | Key Features | Direct Replacement Models |
|---|---|---|---|---|---|---|
| QGB | Multiple Domestic Makers | Enterprise / JB Standard | Tie Rod Cast Iron / Steel Tube | 50~400 | Heavy-duty cylinder, cast iron barrel, high pressure resistance, suitable for harsh environments | No 1:1 direct replacement, alternative selection based on thrust & space |
| Series | Brand | Standard | Structure Type | Bore Range(mm) | Key Features | Direct Replacement Models |
|---|---|---|---|---|---|---|
| MDBB | SMC | JIS Japanese Standard | Tie Rod Square End Cap | 32~125 | SMC classic JIS tie rod cylinder, excellent buffer performance, air port & buffer valve on same side | JSI, JMDBB |
| JMDBB | Domestic Replica | JIS Japanese Standard | Tie Rod Type | 32~100 | Domestic copy of SMC MDBB, fully consistent mounting dimensions, lower cost | MDBB |
| CDA2B | SMC | JIS Japanese Standard | Tie Rod Double Rod | 40~100 | CA series double rod cylinder, JIS standard, optional anti-rotation structure | AirTAC SCD double rod cylinder (Dimensions not interchangeable) |
| CDS1B | SMC | JIS / Asia Standard | Large Bore Tie Rod | 125~300 | CS1 large bore tie rod cylinder, built-in air buffer | SG; DSBG; CDS2B (Same series upgraded model) |
| CDS2B | SMC | JIS / Asia Standard | Lightweight Large Bore Tie Rod | 125~300 | CS2 upgraded from CS1, 65% weight reduction, mounting dimensions fully same as CDS1B | CDS1B; SG; DSBG |
| CP96SDB | SMC | ISO 15552 | Non-tie Rod Profile | 32~125 | SMC European profile cylinder, lightweight, composite buffer, compatible D-M9 magnetic switch | SI, SE, SAI, DSBC, S96SDB |
| S96SDB | Domestic Replica | ISO 15552 | Non-tie Rod Profile | 32~100 | Domestic copy of SMC CP96SDB, consistent mounting dimensions, lower price | CP96SDB; SI; SE; DSBC |
| Series | Brand | Standard | Structure Type | Bore Range(mm) | Key Features | Direct Replacement Models |
|---|---|---|---|---|---|---|
| DSBC | Festo | ISO 15552 | Non-tie Rod Profile | 32~100 | Festo new generation European cylinder, self-adjusting buffer, dual switch slot, DNC successor | DNC; SI; SE; CP96SDB |
| DNC | Festo | ISO 6431 | Non-tie Rod Profile | 32~125 | Festo classic old European cylinder, adjustable buffer, gradually phased out | DSBC (Direct replacement); SAU |
| CRDNG | Festo | ISO 15552 | Full Stainless Steel Profile | 32~100 | Barrel, piston rod & end caps all stainless steel, excellent corrosion resistance, food & pharmaceutical clean application | DSBF (Coated version, lower anti-corrosion grade) |
| DSBF | Festo | ISO 15552 | Anti-corrosion Coated Profile | 32~100 | Profile with anti-corrosion coating, food grade grease, food industry | CRDNG (Upgraded full stainless steel); DSBC (Base version) |
| DSBG | Festo | ISO 15552 | Profile + Built-in Tie Rod | 32~320 | Large bore European cylinder, built-in tie rod for high rigidity, self-adjusting buffer | SG; CDS1B, CDS2B |
Brand names mentioned on this website are cited solely for reference regarding technical standards. This product is not an original product from the respective brand and is not authorized by that brand. It is manufactured in accordance with the corresponding brand’s technical specifications and features a similar appearance; however, it is an independently developed product and has no affiliation with the brand in question.
Standard Cylinders – Application Areas
Suitable for:
Linear motion requiring only two end positions
(fully extended and fully retracted)
without the need for intermediate stops.
Bag feeding, sealing head, hopper gate, carton flap folding, discharge pusher
Workpiece positioning and clamping, lifting mechanisms for loading and unloading, stopping mechanisms, and component press-fitting.
Welding fixture positioning, workpiece clamping, and component transfer
Assembly line stoppers, sorting pushers, and pallet lifting units.
Machine tool door opening/closing, workpiece feeding, and scrap ejection.
Conveyor guide plate, simple hold-down device (stainless steel version available for humid environments)
MYFEQD offers a comprehensive range of cilindro neumático normalizado solutions.
Our pneumatic actuators comply with the technical standards of major global brands, providing quick solutions for model selection across various industrial
pneumatic systems.
A cylinder’s thrust depends primarily on air pressure and bore size. Under standard operating conditions with 0.5 MPa pressure, we have reference values for standard thrust; the extension thrust is greater than the retraction pulling force. If you provide the operating air pressure, I can calculate the exact force for you to ensure it is sufficient for smooth, stall-free operation.
They are different. When the cylinder extends, the full bore area is subjected to pressure, resulting in greater force; during retraction, the piston rod occupies part of the area, reducing the effective pressure area, so the pulling force is slightly less than the pushing force—this is a standard characteristic.
Non-standard custom strokes are available; standard short-stroke models are well-stocked, while extra-long strokes can be customized. Please refer to the technical specifications table above for detailed data.
Supports a full range of standard mounting styles: foot mount (LB), front flange (FA), rear flange (FB), single clevis (CA), double clevis (CB), and trunnion mount (TCM). Mounting dimensions and hole patterns are fully interchangeable, allowing for direct replacement of major brands such as AirTAC, SMC, and Festo without equipment modifications.
Components can be selected based on actual application requirements. For automated control, a magnetic pneumatic cylinder must be chosen to detect the extended and retracted positions, thereby facilitating automatic equipment control.
Please refer to the product specifications table for a detailed description.
The entire series comes standard with adjustable air cushioning at both ends; the cushioning force can be regulated based on equipment speed and load, effectively reducing impact forces at the end of the stroke, preventing collisions and abnormal noise, protecting both the equipment and the cylinder, and ensuring smoother operation.
The standard operating pressure range is 0.15–1.0 MPa, with a maximum pressure rating of 1.0 MPa, ensuring stable sealing without air leakage. The minimum actuation pressure is just 0.1 MPa, allowing for smooth operation even under low-pressure conditions, free from stick-slip or binding.
Standard cylinders are not recommended for prolonged exposure to lateral forces or off-center loads; they are best suited for straightforward linear push-pull movements. If your equipment involves lateral forces or eccentric loading, I can recommend cylinders with guide rods or suggest adding a guiding mechanism to prevent issues such as piston rod deformation, air leakage, or jamming and damage.
This can be resolved in three ways:
① Adjust the built-in cushioning at both ends of the cylinder;
② Install pneumatic speed control valves to regulate intake and exhaust speeds;
③ For heavy-load applications, install hydraulic shock absorbers;
This completely eliminates impact and abnormal noise, resulting in more stable operation.
Standard models are suitable for general indoor operating conditions. For environments involving moisture, high humidity, or light dust, options are available to upgrade to stainless steel piston rods and corrosion-resistant seals. For cleanroom applications in the food and pharmaceutical industries, custom clean-grade versions can be provided—featuring rust and dust resistance and high corrosion resistance—or dust-resistant cylinders can be selected.
Prolonged exposure to moisture and oil accelerates seal aging and shortens cylinder lifespan. It is recommended to install a filter and an oil-water separator at the inlet; purifying the air supply in this way can significantly extend the cylinder’s service life and ensure long-term leak-free operation.
There is a difference. Horizontal mounting ensures even load distribution and minimizes energy loss; however, in vertical lifting or pulling applications, the load directly affects the output force, so it is necessary to select a cylinder with a larger bore size to avoid insufficient lifting power or sluggish movement.
The cylinder barrel is made of high-strength aluminum alloy, offering a lightweight design, resistance to deformation, and excellent heat dissipation. The piston rod is crafted from high-frequency quenched, chrome-plated 45# steel, ensuring high hardness, wear resistance, and rust protection, while remaining resistant to scoring and bending. Customization using 304 or 316 stainless steel is also available.
Standard units come equipped with wear-resistant NBR seals, offering excellent elasticity and airtightness to prevent leakage during long-term use; for demanding operating conditions involving high temperatures or oil exposure, upgrades to FKM (fluoroelastomer) seals—which provide superior heat and oil resistance—are available.
Under standard operating conditions—with a clean air supply and no off-center loading—it offers years of stable performance and a service life exceeding 3 million cycles. As long as it is not subjected to lateral forces and the air supply remains clean, issues such as air leaks or sticking are virtually non-existent.
We offer sample trials; you only need to cover the shipping costs. Samples of standard in-stock specifications can be dispatched quickly, allowing you to proceed with bulk orders after successful testing and thereby reduce your procurement risk.
Pricing is calculated based on bore size, stroke, and configuration (magnetic/non-magnetic, mounting accessories), offering exceptional value compared to brands of similar quality. Tiered discounts are available for bulk orders and long-term partnerships; the larger the volume, the more favorable the price.
Massive stock of standard specifications available for same-day shipping; custom orders—including non-standard travel lengths and special materials—feature short lead times, with shipment possible in as little as 1–3 days.
The base price applies to the tank unit alone; accessories such as stands, flanges, fittings, and switches can be added as needed. Purchasing a complete set offers better value, though accessories may also be bought separately.
No minimum order quantity; orders as small as a single unit can be shipped. We support small-scale purchases, bulk orders, and long-term stock holding.
Common causes include:
① the presence of water or oil in the air supply causing seal degradation;
② wear resulting from long-term off-center loading;
③ extended service life. Minor air leaks can be remedied by replacing the seal kit, whereas severe wear may require replacing the cylinder entirely; we can provide the necessary repair parts.
Seal repair kits are available for the entire product range, allowing for individual component replacement without the need to replace the entire cylinder, thereby saving on maintenance costs.
Brand-new cylinders come with a standard warranty; in the event of quality issues arising from normal operating conditions—and excluding man-made damage—we provide free replacement or repair, along with dedicated one-on-one technical support throughout the process.
Certainly. If you simply take photos of the entire old cylinder, its nameplate, and the mounting dimensions, I can accurately match the exact model for you—guaranteeing a direct replacement that fits the existing setup without requiring any equipment modifications.
Fabricantes de neumáticos en China
ES 
EN 
AR 
RU 
