Quotation
Core Advantages

Rotary Cylinder

1. High Cost-Effectiveness — Priced significantly lower than electric or hydraulic alternatives; features a simple structure, long service life, and requires no maintenance.
2. Safe, Explosion-Proof, and Suitable for Harsh Environments — Fully pneumatic and spark-free; explosion-proof, dust-resistant, and moisture-resistant; overload-proof (no risk of motor burnout).
3. Stable Torque, Rapid Response, and High Throughput — Delivers stable, precise output and crisp, decisive action, directly boosting production efficiency.

Ver información del producto
Solicita información ahora y obtén un presupuesto
¿Por qué elegirnos?

Desarrollado sobre precisión,
entregado con éxito.

01

OEM / ODM

20 años de experiencia en el sector manufacturero, ofreciendo soluciones a medida que se adaptan a tus especificaciones exactas y a tus necesidades de producción.

Más de 20 años de experiencia
02

Normas técnicas estrictas

La calidad que ofrecemos está a la altura de la de las principales marcas, ya que cumplimos estrictamente con las normas técnicas de las marcas líderes nacionales e internacionales.

Calidad conforme a las normas ISO
03

Un precio estupendo

Situada en Liushi, Yueqing, Wenzhou, provincia de Zhejiang (China), nuestra empresa cuenta con una completa cadena de suministro de componentes, equipos avanzados de alta gama y una larga tradición en la fabricación.

Precios directos de fábrica
MYFEQD — Componentes neumáticos de precisión

Gran fuerza de salida

Rotary Cylinder: Basic Parameters for Selection

A rotary cylinder is a pneumatic actuator that converts the pressure energy of compressed air into the rotary or oscillating motion of an output shaft.

Unlike standard linear cylinders—which only perform linear extension and retraction—this type of cylinder produces rotary output.

It is commonly used in automation equipment for tasks requiring actions such as rotating through an angle, flipping over, or clamping followed by tightening.

HRS series Rotary table cylinder

HRS Series Rotary Cylinder

Ultra-thin rotary type

1. Rack-and-pinion structure ensures smooth operation;

2. Dual-cylinder design enables double the output force;

3. Positioning holes on both sides of the cylinder body facilitate convenient installation and use;

4. Features both pad cushioning and air cushioning for superior buffering performance.

Note: Models HRS10/15 feature only pad cushioning; they do not have air cushioning.

Solicita información ahora y obtén un presupuesto
Diámetro interior (mm)1015203040
Action TypeDe doble efecto
Working MediumAire (filtrado a través de un filtro de 40 μm o más)
Temperatura de trabajo-20°C ~ +70°C
Operating Pressure Range0.25~0.7MPa0.15~0.7MPa
Presión de prueba1.2MPa
Rotary Angle Range0° ~ 190°
Repeatability0.2°
CushioningCushion padCushion pad + Air cushion
Características1. Gear-and-rack structure; 2. Dual-cylinder structure for doubled output force
Hilo del puertoM5×0.8M5×0.8PT1/8PT1/8PT1/8
HRS Compact Rotary Cylinder Order Code Generator

HRS Compact Rotary Cylinder Order Code Generator

Código del pedido actual:
HRS20X90
Notas:
1. Series: HRS compact rotary cylinder. All series are built with magnet.
2. Swing angle: 90° or 180°.
3. Thread: no thread code for bore 10 / 15; for bore 20 / 30 / 40: blank = PT, G = G thread, T = NPT.
4. Sensors CMSG / DMSG / EMSG / CMSJ / DMSJ available.
▲ For non-standard options or special requirements, please contact sales.
HRQ series pneumatic rotary cylinder

HRQ Series Rotary Cylinder

Ultra-thin rotary type

1. Rack-and-pinion structure ensures smooth operation;
2. Dual-cylinder design enables double the output force;
3. High-precision machining of the work table allows for easy load mounting and accurate positioning;
4. A through-hole in the center of the work table facilitates piping connections;
5. Positioning holes are provided on both sides (sizes 10–200) or the bottom (sizes 2–7) of the cylinder body, ensuring convenient installation;
6. Two cushioning options are available: fixed cushioning via adjustment screws or hydraulic shock absorbers. Hydraulic shock absorbers offer 3 to 5 times the maximum cushioning energy of fixed adjustment screws, providing superior cushioning performance.
Note: Models HRQ2, HRQ3, and HRQ7 feature only the fixed cushioning method (via adjustment screws) and do not support hydraulic shock absorbers.

Solicita información ahora y obtén un presupuesto
Size2371020305070100200
Action TypeDe doble efecto
Working MediumAire (filtrado a través de un filtro de 40 μm o más)
Temperatura de trabajo-20°C ~ +70°C
Operating Pressure (with adjusting screw)0.25~0.7MPa0.2~0.7MPa0.15~0.7MPa
Operating Pressure (with oil-pressure shock absorber)—0.15~0.7MPa
Presión de prueba1.2MPa
Rotary Angle Range0° ~ 190°
Repeatability (with adjusting screw)0.2°0.05°
Repeatability (with oil-pressure shock absorber)—0.05°
Cushioning (with adjusting screw)Cushion pad
Cushioning (with oil-pressure shock absorber)—Oil-pressure cushion
Características1. Gear-and-rack structure; 2. Dual-cylinder structure for doubled output force; 3. Multiple cushion types available
Port Thread (front)M5×0.8PT1/8
Port Thread (side)—M5×0.8
HRQ Rotary Actuator Order Code Generator

HRQ Rotary Actuator Order Code Generator

Código del pedido actual:
HRQ20
Notas:
1. Series: HRQ rotary actuator. All series are built with magnet.
2. Cushion: blank = fixed cushion; A = oil shock absorber. Oil shock absorber (A) is available for size 10 / 20 / 30 / 50 / 70 / 100 / 200; size 2 / 3 / 7 has fixed cushion only.
3. Thread: no thread code for size 2 / 3 / 7 / 10 / 20; for size 30 / 50 / 70 / 100 / 200: blank = PT, G = G thread, T = NPT.
4. Sensors CMSG / DMSG / EMSG / CMSJ / DMSJ available.
▲ For non-standard options or special requirements, please contact sales.
Cilindro de sujeción oscilante de la serie ACK 2

ACK Series Rotary Cylinder

Corner-mounted downward-pressing type

1. Seal materials ensure reliable cylinder performance under various operating conditions;

2. Triple-guide-slot structure provides high guiding precision;

3. Available in single-acting and double-acting (90°) configurations;

4. Rotation options include left-hand and right-hand rotation, as well as 90° and 180° angles;

5. The piston rod is made of special alloy steel and heat-treated to ensure a longer service life.

Solicita información ahora y obtén un presupuesto
Inner Diameter (mm)2532405063
Action TypeDe doble efecto
Working MediumAire (filtrado a través de un filtro de 40 μm o más)
Temperatura de trabajo-20°C ~ +70°C
Operating Pressure Range0.15~1.0MPa
Presión de prueba1.5MPa
Rango de velocidades de funcionamiento50~200mm/s
Rotary Stroke at 90° (mm)1414151515
Rotary Stroke at 180° (mm)2020212121
Gripping Stroke at 90° (mm)1212121414
Gripping Stroke at 180° (mm)66688
Total Stroke (mm)2626272929
Hilo del puertoM5×0.8PT1/8
Note: For non-cushioned installation, add an exhaust throttle valve to achieve cushioning effect.
ACK Angle Cylinder Order Code Generator

ACK Angle Cylinder Order Code Generator

Código del pedido actual:
ACKL25×90
Notas:
1. Series: ACK angle cylinder (double acting); ACKD angle cylinder (double clamp plate, 90° only).
2. Direction: L = press-down left-hand (counter-clockwise); R = press-down right-hand (clockwise).
3. Thread: blank = PT, G = G thread, N = NPT thread. When port thread is M5, this code is blank.
▲ For non-standard options or special requirements, please contact sales.
QCK series Swing clamp cylinder 2

QCK Series Rotary Cylinder

Rotary clamping type

1. Suitable for welding environments; the piston rod undergoes QPQ treatment, offering superior resistance to weld spatter adhesion compared to hard-chrome plated rods.
2. The front cover features a stainless steel wiper seal that is robust and durable, effectively protecting the cylinder against damage from dust and weld spatter—a more reliable solution than dust boots.
3. Body mounting dimensions and installation methods are identical to the ACQ series, allowing for the use of ACQ mounting accessories.

Solicita información ahora y obtén un presupuesto
Inner Diameter (mm)1216202532405063
Action TypeDe doble efecto
Working MediumAire (filtrado a través de un filtro de 40 μm o más)
Temperatura de trabajo-20°C ~ +70°C
Operating Pressure Range0.2~1.0MPa0.15~1.0MPa
Presión de prueba1.5MPa
Rango de velocidades de funcionamiento50~200mm/s
Rotary Angle90°
Repeatability±2°
Rotary Stroke (mm)7.59.51519
CushioningAnti-collision pad
Características1. Dust and welding-spatter resistant; suitable for welding environments
Piston Rod Outer Dia. (mm)68121216162020
Hilo del puertoM5×0.8M5×0.8M5×0.8M5×0.8PT1/8PT1/8PT1/4PT1/4
QCK Rotary Clamp Cylinder Order Code Generator

QCK Rotary Clamp Cylinder Order Code Generator

Código del pedido actual:
QCKL32×10S
Notas:
1. Series: QCK rotary clamp cylinder. Built-in magnet (S).
2. Direction: L = left-hand (CCW); R = right-hand (CW).
3. Clamp stroke varies by bore; see options above.
4. Rod end: blank = taper type (with swing arm); M = flat type (without swing arm).
5. Mounting: blank = no accessory; FB = rear end cover flange plate.
6. Thread: blank = PT, G = G thread. When port thread is M5, this code is blank.
7. Sensors CMSG / EMSG / DMSG / CMSJ / DMSJ available.
▲ For non-standard options or special requirements, please contact sales.
QDK series Swing clamp cylinder 3

QDK Series Rotary Cylinder

Planar rotary clamping type

1. The rotary motion occurs at a constant vertical level (zero vertical travel), making it more suitable than the QCK series for space-constrained environments;

2. Flexible mounting options are available, with a choice between a front-cover boss type and a front-cover flat type;

3. Features a dual-pin rotary guide slot design, ensuring smooth operation and high repeatability;

4. Sensor mounting slots are integrated into all four sides of the cylinder body, eliminating the need for additional mounting accessories and offering greater convenience and flexibility.

Solicita información ahora y obtén un presupuesto
Inner Diameter (mm)20253240
Action TypeDe doble efecto
Working MediumAire (filtrado a través de un filtro de 40 μm o más)
Temperatura de trabajo-20°C ~ +70°C
Operating Pressure Range0.15~1.0MPa
Presión de prueba1.5MPa
Rotary Angle90°
Repeatability±2°
Rotary Stroke (mm)0° (Plane rotary)
CushioningAnti-collision pad
Piston Rod Outer Dia. (mm)12121216
Hilo del puertoM5×0.8M5×0.8M5×0.8PT1/8
QDK Flat Rotary Clamp Cylinder Order Code Generator

QDK Flat Rotary Clamp Cylinder Order Code Generator

Código del pedido actual:
QDKL32×5S
Notas:
1. Series: QDK flat rotary clamp cylinder. Clamp stroke fixed 5 mm; built-in magnet (S).
2. Direction: L = left-hand (CCW); R = right-hand (CW).
3. Front cover: blank = through-hole plate type; U = flat type.
4. Clamp arm: blank = none; JB = with clamp arm.
5. Thread: blank = PT, G = G thread. When port thread is M5, this code is blank.
6. Sensors CMSG / DMSG / EMSG / CMSJ / DMSJ available.
▲ For non-standard options or special requirements, please contact sales.

Rotary Cylinder Specifications

Tabla comparativa de las diferencias en la selección de modelos

Pneumatic Rotary Actuator & Semi-Rotary Drive Series

7 groups · 24 series · Click a group to expand · Click a series to view Drive Type / Key Features / Cross-Replacement

No matching series
Ver información del producto

Las marcas mencionadas en este sitio web se citan únicamente a título de referencia en relación con las normas técnicas. Este producto no es un producto original de la marca en cuestión y no cuenta con la autorización de dicha marca. Se fabrica de acuerdo con las especificaciones técnicas de la marca correspondiente y presenta un aspecto similar; sin embargo, se trata de un producto desarrollado de forma independiente y no tiene ninguna relación con la marca en cuestión.

Características principales

Rotary Cylinder are widely used.

Material reorientation, flipping, and handling: assembly lines, loading and unloading
Clamping and positioning: machine tools, clamps, and fixtures
Valve actuation and indexing mechanisms: rotary indexing tables and turntables
Robotics / automated joints: end-effector rotation

Cylinder Applications

Packaging Machinery

Bag feeding, sealing head, hopper gate, carton flap folding, discharge pusher

Non-standard Automated Assembly Line

Workpiece positioning and clamping, lifting mechanisms for loading and unloading, stopping mechanisms, and component press-fitting.

Automotive assembly

Welding fixture positioning, workpiece clamping, and component transfer

Logistics Conveying Equipment

Assembly line stoppers, sorting pushers, and pallet lifting units.

General-purpose machinery

Machine tool door opening/closing, workpiece feeding, and scrap ejection.

Light Industry and Food Machinery

Conveyor guide plate, simple hold-down device (stainless steel version available for humid environments)

Key Information for Placing an Order

Rotary Cylinder: Frequently Asked Questions

MYFEQD offers a comprehensive range of Rotary Cylinder solutions.

Our pneumatic actuators comply with the technical standards of major global brands,

providing quick solutions for model selection across various industrial

pneumatic systems.

Model Selection & Technical Usage FAQ
Can it rotate continuously 360°?

No, only swing within preset angle. Choose air motor for endless rotation.

Equipped with adjustable stopper for fine angle tuning.

Yes, install flow control valve to adjust swing speed.

Overload torque, unclean compressed air, impact without buffer.

Not recommended. Extra support structure needed for heavy radial load.

Calculate load torque from workpiece weight & rotation radius, add safety margin (1.5~2 times).

Suitable for intermittent automation cycle; continuous high-frequency operation needs derating.

NBR nitrile rubber, for general air environment.

FAQ Before Placing a Preliminary Order
Can we customize the rotation angle?

Non-standard swing angle available, please send your requirement for quotation.

Positioning error increases, internal parts wear rapidly, even cause permanent damage.

Can be installed horizontally, vertically or upside down, keep load within specification.

Yes, use synchronous air circuit or proportional valve for synchronization control.

Align shaft concentricity, avoid forced assembly, reserve buffer space.

Double vane delivers higher torque within same size; single vane has larger swing angle range.

Heavy dust will accelerate seal wear, protective cover is recommended.

Pick rack-pinion for high precision; choose vane if compact dimension is priority.

Logotipo MYFEQD NEW2

Envíanos un mensaje

Fabricantes de neumáticos en China