Products

automatic drain filter AD402 series

  • When there is no pressure in the condensate bowl: The float descends due to its own weight, closing the internal orifice; the piston is pushed downward by a spring, and the condensate is discharged.
  • When there is pressure in the condensate bowl: When the pressure exceeds 1 kgf/cm², the piston overcomes the spring force and moves upward, closing the drainage passage and isolating the interior of the bowl from the outside.
  • When condensate accumulates in the bowl: As the condensate reaches a certain level, the float rises due to buoyancy, opening the internal orifice. Pressure then enters the internal chamber, pushing the piston downward (aided by the spring), and the condensate is discharged through the drainage conduit.

Share with friends:


AD402 Series Automatic Drain Specification
ModelAD402 series automatic drain filter
Working MediumAir (filtered through 40μm mesh or above)
Proof Pressure1.0 MPa
Operating Pressure Range0.15~0.85 MPa
Port ThreadG1/2
Working Temperature-5~60°C (No Freezing)
Drain Port ThreadG3/8
Recommended OilTurbine Oil No.1 (ISO VG32)
Body MaterialDie-cast Aluminum with Corrosion-resistant Paint
Note:
1. When installing the drain pipe, use a tube with inner diameter ≥10mm, length ≤5m, and do not bend upward.
2. Compressor power must be ≥3.7kW, 400 L/min (ANR) or above.


MYFEQD Logo NEW2

Send us a message

Pneumatic Manufacturers in China