Products

direct acting pneumatic valve 3V2M series

  • Direct-acting design ensures sensitive switching; available in both normally closed (NC) and normally open (NO) configurations.
  • Coaxial poppet-style construction provides excellent sealing and high flow capacity; no lubrication required.
  • Equipped with a manual override for easier installation and commissioning.
  • Designed for use with a manifold base, allowing for the integration of multiple valves to save space.
  • Centralized air supply and wiring simplify troubleshooting in the event of a malfunction.
  • Highly flexible and expandable; the number and type of solenoid valves can be combined or added to as needed.
  • Features a specialized manifold base gasket; note that the gasket cannot be flipped to switch between normally closed and normally open configurations.

Share with friends:


ItemSpecification
Working MediumAir (filtered through 40μm or above filter)
Actuation TypeDirect Acting
Port SizePT1/8
Position Number3 Port 2 Position
Effective Area1.7mm² (Cv=0.1)
Exhaust TypeManifold Exhaust / Independent Exhaust
Operating Pressure Range0~0.8 MPa
Proof Pressure1.2 MPa
Working Temperature-20°C ~ +70°C
Body MaterialAluminum Alloy
LubricationNot required (If lubricated, use ISO VG32 or equivalent)
Max. Operating Frequency10 cycles/sec
Port ThreadPT, NPT, G
Standard VoltageAC220V, AC110V, AC24V, DC24V, DC12V
Voltage ToleranceAC: ±15%  DC: ±10%
Power Consumption (AC: 7VA), (DC: 7.0W)
Protection ClassIP65 (DIN40050)
Insulation ClassClass B
Electrical EntryDIN Plug Type / Lead Wire Type
Response Time0.05 sec or less



3V2M Series Direct-Acting 3/2 Pneumatic Solenoid Valve Order Code Generator

Current Order Code:
3V2M-NC-A

Notes:
1. 3V2M = direct-acting 3-port 2-position solenoid valve. Initial state: NC = normally closed, NO = normally open.
2. Voltage: A=AC220V, B=DC24V, C=AC110V, E=AC24V, F=DC12V. Wiring: blank=DIN socket, I=lead wire. Thread: blank=PT, G=G, T=NPT.
3. Manifold stations: blank = single valve; 1F ~ 20F = number of stations. Exhaust type becomes available only when manifold stations are selected: blank = centralized exhaust (default), D = independent exhaust.
4. Blind plate (R2: sub-base blind plate) can be purchased separately.
▲ For non-standard options or special requirements, please contact sales.

MYFEQD Logo NEW2

Send us a message

Pneumatic Manufacturers in China