Ürünler

doğrudan etkili pnömatik valf 3V2M serisi

  • Direct-acting design ensures sensitive switching; available in both normally closed (NC) and normally open (NO) configurations.
  • Coaxial poppet-style construction provides excellent sealing and high flow capacity; no lubrication required.
  • Equipped with a manual override for easier installation and commissioning.
  • Designed for use with a manifold base, allowing for the integration of multiple valves to save space.
  • Centralized air supply and wiring simplify troubleshooting in the event of a malfunction.
  • Highly flexible and expandable; the number and type of solenoid valves can be combined or added to as needed.
  • Features a specialized manifold base gasket; note that the gasket cannot be flipped to switch between normally closed and normally open configurations.

Arkadaşlarınızla paylaşın:


ÜrünTeknik Özellikler
Çalışma OrtamıHava (40 μm veya daha büyük gözenekli filtreden geçirilmiş)
Çalıştırma TürüDoğrudan Etkili
Port BoyutuPT1/8
Pozisyon Numarası3 Bağlantı Noktalı, 2 Konumlu
Etkili Alan1.7mm² (Cv=0.1)
Exhaust TypeManifold Exhaust / Independent Exhaust
Çalışma Basıncı Aralığı0~0,8 MPa
Test Basıncı1,2 MPa
Çalışma Sıcaklığı-20 °C ~ +70 °C
Gövde MalzemesiAlüminyum Alaşımı
YağlamaGerekli değildir (Yağlama yapılacaksa, ISO VG32 veya eşdeğeri kullanılmalıdır)
Maks. Çalışma Frekansı10 döngü/saniye
Liman KonusuPT, NPT, G
Standart GerilimAC 220 V, AC 110 V, AC 24 V, DC 24 V, DC 12 V
Gerilim ToleransıAC: ±15% DC: ±10%
Güç Tüketimi (AC: 7 VA), (DC: 7,0 W)
Koruma SınıfıIP65 (DIN 40050)
Yalıtım SınıfıB Sınıfı
Elektrik GirişiDIN Fiş Tipi / Kablo Tipi
Tepki Süresi0,05 saniye veya daha az



3V2M Series Direct-Acting 3/2 Pneumatic Solenoid Valve Order Code Generator

Mevcut Sipariş Kodu:
3V2M-NC-A

Notlar:
1. 3V2M = direct-acting 3-port 2-position solenoid valve. Initial state: NC = normally closed, NO = normally open.
2. Voltage: A=AC220V, B=DC24V, C=AC110V, E=AC24V, F=DC12V. Wiring: blank=DIN socket, I=lead wire. Thread: blank=PT, G=G, T=NPT.
3. Manifold stations: blank = single valve; 1F ~ 20F = number of stations. Exhaust type becomes available only when manifold stations are selected: blank = centralized exhaust (default), D = independent exhaust.
4. Blind plate (R2: sub-base blind plate) can be purchased separately.
▲ Standart dışı seçenekler veya özel talepleriniz için lütfen satış departmanımızla iletişime geçin.

MYFEQD Logosu YENİ2

Bize bir mesaj gönderin

Çin'deki Pnömatik Üreticileri