Alıntı

Ürünler

pneumatic cylinder with solenoid valve 1
SCF series Pneumatic Cylinder With Solenoid Valve - Görsel 2
SCF series Pneumatic Cylinder With Solenoid Valve - Görsel 3

SCF series Pneumatic Cylinder With Solenoid Valve

  • It features an aluminum alloy cylinder barrel with a standard wall thickness based on Airtac technical specifications.
  • Its piston rod is precision-ground and formed from #45 high-carbon steel.
  • The sealing ring utilizes a high-quality Nitrile rubber seal. (Upgrades to higher-standard sealing rings are available upon request.)

Arkadaşlarınızla paylaşın:

WhatsApp Facebook Instagram Weixin YouTube
Hemen teklif isteyin
Ücretsiz Örnek Alın

SCF series Pneumatic Cylinder With Solenoid Valve belongs to a derivative series of pneumatic cylinders formed by combining standard SC-series cylinders with solenoid valves.

  1. Designed for use in conjunction with 4M210 and 4M310 solenoid valves.
  2. Enables one-to-one control, eliminating the need to install a separate control valve.
  3. Saves both installation time and space, making it ideal for decentralized application within pneumatic systems.
  4. A wide range of mounting accessories is available, ensuring simple installation.

pneumatic cylinder with solenoid valve symbol

Technical Parameters

Pneumatic Cylinder Section
İç çap (mm) (delik çapı)3240506380100
Eylem FormuÇift etkili tip
Çalışma OrtamıHava (40 µm’lik bir tel süzgeçten süzülmüş)
Mounting ConfigurationsBasic Type FA, FB, CA, CB, LB, TC, TCM1
Çalışma Basıncı Aralığı0,15~1,0 MPa (22~145 psi) (1,5~10,0 bar)
Garantili Basınç Dayanımı1.5Mpa（215Psi）（15bar）
Çalışma Sıcaklığı-20 °C ~ 70 °C
Çalışma Hızı Aralığı30~800mm/s
Travel Range（0~250  +1.0）（250~1000   +1.5）（1001~1500   +2.0）
Aracı FormuAyarlanabilir Yastıklama (Hava Yastıklama)
Yastık Hareketi (mm)212829
Connection Thread TypePT1/8PT1/4PT3/8PT1/2
PU Air Tubing Specifications (Outer Diameter × Inner Diameter)φ8mmXφ5mmφ10mmXφ6.5mm
Piston Çubuğu Bağlantı AksesuarlarıI: I Tipi Bağlantı U: Balık Gözü Bağlantı Y: Y Tipi Bağlantı F: Yüzer Bağlantı
Manyetik Anahtarlarla UyumluSC1-U  SC1-F  CS1-G  D-A93  D-M9B  D-273 D-M9N DS1-E DMSH CS-9D CS-8G DFSH DFSE
Pneumatic Solenoid Valve Section
Model4M210-06/4M210-084M310-08/4M310-10
Çalışma OrtamıHava (40 µm’lik bir tel süzgeçten süzülmüş)
Etki MekanizmasıInternally Piloted
Interface Thread SpecificationsInlet: PT1/4 Outlet: PT1/8Inlet: PT3/8 Outlet: PT1/4
Effective Cross-Sectional Area4M210-06:14.0mm²（cv=0.78）

4M210-08:16.0mm²（Cv=0.89）

4M310-08:25.0mm²（cv=1.4）

4M31010:30.0mm²（Cv=1.68）

Number of positionsFive-Hole Socket, Two-Gang
Çalışma Basıncı Aralığı0.15~0.8Mpa（21~114psi）
Garantili Basınç Dayanımı1.2Mpa（175psi）
Çalışma Sıcaklığı-20 °C ~ 70 °C
Body MaterialAlüminyum Alaşımı
yağlamaLubricant has been appropriately added internally.
Maximum Operating Frequency5 times per second4 times per second
Solenoid Valve Electrical Parameters
Standard VoltageAC220V AC110V AC24V DC24V DC12V
Operating Voltage RangeAC:±15%    DC±：10%
power consumptionAC:3.5VA  DC:3.0W
Protection LevelIP65(DIN40050)
Heat Resistance RatingGrade B
Connection TypeDIN Socket-type / Lead-wire type
Excitation TimeLess than 0.05 seconds

Not:
The connection threads are available in PT or G thread types.
If lubricant is applied, operation must not be interrupted; ISO VG32 lubricant (or an equivalent grade) is recommended.
The maximum operating frequency applies under no-load conditions.

Pneumatic Cylinder Stroke

İç çap (mm) (delik çapı)Standart Hareket Mesafesi (mm)shortest StrokeMaksimum Strokİzin Verilen Seyahatler
32Standard Model50.75.80.100.125.150.160.175.200.250.300.350.400.450.5005010002000
TC-Type100.125.150.160.175.200.250.300.350.400.450.50010010002000
40 50Standard Model50.75.80.100.125.150.160.175.200.250.300.350.400.450.500.600.700.800.900.10005012002000
TC-Type100.125.150.160.175.200.250.300.350.400.450.500.600.700.800.900.100010012002000
63 80 100Standard Model75.80.100.125.150.160.175.200.250.300.350.400.450.500.600.700.800.900.10007515002000
TC-Type125.150.160.175.200.250.300.350.400.450.500.600.700.800.900.100012515002000

For other special itineraries, please contact our company.

For the output force data of this pneumatic cylinder model, please refer to the output force table for the SC series pneumatic cylinders.

Bitmiş Ürün Sipariş Kodu

pneumatic cylinder with solenoid valve Finished Product Order Code

Pneumatic cylinder accessories are compatible with the SAU pneumatic cylinder series.
TC cylinder accessories are designed for use with the TCM1 series.

SCF series Pneumatic Cylinder With Solenoid Valve Main Components

SCF series Pneumatic Cylinder With Solenoid Valve Main Components

Seri NumarasıProduct NameSeri NumarasıProduct Name
14M Series Pneumatic Solenoid Valves4Pneumatic Air Hose
2Connecting Aluminum Block5SC Series Standard Cylinders
3Straight Pneumatic Fittings (Male) PC6External Hexagon 90-Degree Elbow Fitting PH

SCF series Pneumatic Cylinder With Solenoid Valve Dimensional Drawing

pneumatic cylinder with solenoid valve Dimensional Drawing

Delik / SembolAABACADAEAFAGBBABCBDCCBDDAEEAFFAMMA
32140479327.527.5118534567677789671232M10*1,25221762815
40142499327.527.5118535068.56780.594721634M12*1,25241773215
50150579327.527.51205162726789106842042M16*1,5322383815
63153579627.527.5135.554.57577.569.596.5124972042M16*1,5322383815
80182751073333137539486.569.5106.51431162554M20*1,54026104721
100188751133333135.554.51129669.51151611342554M20*1,54026104721
Delik / SembolEquipped with Solenoid ValvePQKKAKBH
324M210-06PT18PT1/8M6*114.53310
4M210-08PT1/4
404M210-06PT18PT1/8M6*114.53713
4M210-08PT1/4
504M210-06PT18PT1/8M6*114.54717
4M210-08PT1/4
634M310-08PT1/4PT1/4M8*1,2514.55617
4M310-10PT3/8
804M310-08PT1/4PT1/4M10*1,5177022
4M310-10PT3/8
1004M310-08PT1/4PT1/4M10*1,5178422
4M310-10PT3/8

The magnetic and non-magnetic versions share identical dimensions.

SCF series Pneumatic Cylinder With Solenoid Valve Precautions for Use

pneumatic cylinder with solenoid valve Usage Diagram

  1. Based on actual operating requirements, two working modes can be selected: the piston rod retracts when energized, or the piston rod extends when energized.
  2. By default, the piston rod retracts when power is applied. To reverse this—so that the piston rod extends when powered—simply remove the solenoid valve, flip it around, and reinstall it, as shown in Figure 2.

Note: During disassembly and assembly, pay special attention to ensure that the seal between the solenoid valve and the connecting block is in the specified position.

Yukarıda verilen silindirlerle ilgili bilgilere ek olarak, aşağıdaki ilgili ayrıntılar da gözden geçirilmelidir.

MYFEQD Logosu YENİ2

Bize bir mesaj gönderin

Çin'deki Pnömatik Üreticileri