Arkadaşlarınızla paylaşın:
HFY series pneumatic parallel gripper is a pivot-style (Y-type/angular) pneumatic gripper cylinder that utilizes a hinged lever mechanism to actuate the opening and closing of the gripper jaws; this differs from the parallel-style HFD and HFP models. Air pressure drives the piston, and a linkage mechanism causes the two jaws to rotate around a pivot point, opening and closing in a Y-shaped motion. It is classified as an angular gripper; a single-acting, normally open version (HFTY) is also available.
An internal single-piston drive mechanism actuates two sets of gripper jaws, causing them to pivot around a bottom fulcrum;
HFY (Double-acting): Controlled by dual air supply lines; air pressure drives both opening and clamping actions; no return spring;
HFTY (Single-acting, normally open): Springs hold the jaws open; air pressure engages clamping; the workpiece is automatically released when air pressure is cut off.
An optimal clamping angle ensures a wide range of practical applications.
Single-piston structure; high clamping torque.
Equipped with a built-in variable throttle valve, allowing for convenient adjustment of the gripper’s opening and closing speed.
Precise positioning accuracy ensures greater accuracy and reliability when gripping workpieces.
Three-sided mounting: Mounting holes are provided on both the sides and the bottom, facilitating installation and use under various conditions.
Built-in mounting grooves for sensors (magnetic switches).
| Delik çapı (mm) | 6 | 10 | 16 | 20 | 25 | 32 | |
| Silindirli çalışma tipi | Double-acting type, single-acting normally open type | ||||||
| Çalışma Ortamı | Hava (40 µm’lik bir tel süzgeçten süzülmüş) | ||||||
| Çalışma basıncı aralığı | Çift etkili tip | 0.2~0.7Mpa(29~100psi) | 0,15–0,7 MPa (22–100 psi) | ||||
| Tek etkili tip | 0.3~0.7Mpa(45~100psi) | 0.25~0.7Mpa(36~100psi) | |||||
| Çalışma Sıcaklığı | -20 °C ~ 70 °C | ||||||
| Yağ sürmek / Yağ eklemek / Yağlamak | Cylinder section: Not required; Gripper moving parts: Required (apply grease to parts with relative motion). | ||||||
| Yastıklama türü | Çarpışma önleyici ped | ||||||
| Maksimum çalışma frekansı | 180 （C.P.M） | ||||||
| Installation Method | Side mounting, front threaded hole mounting, front through-hole mounting, rear mounting | ||||||
| Arayüz diş boyutu | M3*0,5 | M5*0,8 | |||||
| Manyetik sensör anahtarı | CMSG.DMSG.EMSG.CMSH.DMSH.EMSH | ||||||
| Silindirli çalışma tipi | Double-acting type （HFY） | single-acting normally open type（HFTY） | |||||||||||
| Delik çapı (mm) | 6 | 10 | 16 | 20 | 25 | 32 | 6 | 10 | 16 | 20 | 25 | 32 | |
| Theoretical clamping torque (N·cm) | closure | 7.4*P | 17.6*P | 90*P | 152*P | 304*P | 637*P | 5.7*P | 11.8*P | 71.2*P | 122.4*P | 252*P | 589*P |
| Open wide | 10.6*P | 29.4*P | 129*P | 252*P | 473*P | 904*P | — | — | — | — | — | — | |
| Maximum gripping point length (L) (mm) | 30 | 30 | 40 | 60 | 70 | 85 | 30 | 30 | 40 | 60 | 70 | 85 | |
| Opening angle (°) | 30 +3 | ||||||||||||
| Closing angle (°) | -10 -3 | ||||||||||||
In the clamping torque values shown in the table above, “P” represents the actual operating air pressure.
Çin'deki Pnömatik Üreticileri
