Arkadaşlarınızla paylaşın:
QDK series Swing clamp cylinder is a horizontal rotary clamping cylinder (also known as a rotary pneumatic cylinder). Unlike the QCK model—which descends while rotating—the QDK maintains a constant height during rotation (zero vertical travel during the rotary phase) and only performs the vertical clamping stroke after rotation is complete; it is designed primarily for use in tooling fixtures within confined spaces.
Operating Principle:
1. Horizontal Swivel Phase: The swing arm rotates 90° within a single horizontal plane; the piston rod height remains unchanged, allowing the arm to clear the top of the workpiece.
2. Vertical Clamping Phase: Once rotation is complete, the piston rod moves vertically downward—a short stroke of 5 mm—to clamp the workpiece.
There is no mechanical self-locking mechanism; the clamp releases upon loss of air pressure, so a continuous air supply is required to maintain clamping force. Clamping force is generated only during the downward stroke; the arm cannot exert clamping force during the rotation phase.
Planar rotary structure: The rotary motion is completed at the same horizontal level—meaning the vertical travel during rotation is zero.
Available with a clamping arm; please contact us for details and separate purchase.
Multiple mounting options: Available in a panel-mount type with a raised boss on the front cover or a type with a flat front cover.
Dual-pin rotary guide slot, featuring high repeat positioning accuracy.
Integrated sensor mounting slots (magnetic switch mounting slots)
| Delik çapı (mm) | Outer diameter of the rotating shaft | Etki şekli | Air Pressure (MPa) | |||||||
| 0.1 | 0.2 | 0.3 | 0.4 | 0.5 | 0.6 | 0.7 | 0.8 | |||
| 20 | 12 | IN (Clamping) | – | 20.1 | 40.2 | 60.3 | 80.4 | 100.5 | 120.6 | 140.7 |
| 25 | 12 | IN (Clamping) | 17.7 | 55.5 | 93.3 | 131.1 | 168.9 | 206.7 | 244.5 | 282.3 |
| 32 | 12 | IN (Clamping) | 43.1 | 111.2 | 181.3 | 250.4 | 319.5 | 388.6 | 457.7 | 526.8 |
| 40 | 16 | IN (Clamping) | 75.2 | 180.7 | 286.2 | 391.7 | 497.2 | 602.7 | 708.2 | 813.7 |
| Delik çapı (mm) | 20 | 25 | 32 | 40 |
| Etki şekli | Çift etkili tip | |||
| Çalışma Ortamı | Hava (40 µm’lik bir tel süzgeçten süzülmüş) | |||
| Çalışma basıncı aralığı | 0,15~1,0 MPa (22~145 psi) (1,5~10 bar) | |||
| Garantili basınç direnci | 1,5 MPa (215 psi) (15 bar) | |||
| Çalışma Sıcaklığı | -20 °C ~ 70 °C | |||
| Rotation angle | 90° | |||
| Repeat positioning accuracy | ±2° | |||
| Direction of rotation | Left-handed or right-handed | |||
| Rotary stroke | 0（Planar rotary motion） | |||
| Clamping stroke | 5mm | |||
| Aracı Formu | Çarpışma önleyici ped | |||
| Arayüz diş boyutu | M5*0,8 | PT1/8 | ||
Bağlantı için kullanılabilen diş tipleri arasında PT, G ve NPT bulunmaktadır.
Çin'deki Pnömatik Üreticileri
