Produits

HFT series pneumatic parallel gripper

Long finger stroke, suitable for gripping large objects;
Dual-piston drive for increased gripping force;
Rack-and-pinion mechanism ensures synchronized finger opening and closing with high repeatability;
All models come equipped with magnets for easy control.

Partager avec ses amis :

HFT series pneumatic parallel gripper is a wide-stroke, parallel-opening pneumatic gripper (double-acting type) designed specifically for handling large workpieces, distinguishing it from the standard HFZ narrow-stroke series. It utilizes a dual-piston and rack-and-pinion synchronization mechanism, delivering a long opening/closing stroke and high gripping force. The unit ensures excellent synchronization between the left and right grippers and offers precise repeatability. With mounting holes available on multiple sides of the body, it is well-suited for applications such as handling large components on assembly lines and internal bore expansion tasks.

The rack-and-pinion structure offers high repeatability.

The cylinder body features four sensor mounting grooves.

Dual-piston drive effectively increases holding force.

The jig is easy to install.

The main unit can be mounted and secured in multiple orientations.

Large-bore opening gripper (pneumatic expanding gripper): Features a long finger stroke, making it suitable for gripping large-sized objects.

Caractéristiques techniques

Diamètre de l'alésage (mm)	10	16	20	25	32
Type à action par vérin	Type à double effet
Milieu de travail	Air (filtré à travers un tamis à mailles de 40 µm)
Plage de pression de service	0.2~0.7Mpa(36~100psi)	0,15 à 0,7 MPa (22 à 100 psi)
Résistance à la pression garantie	1.2Mpa（175psi)(12.0bar)
Température de fonctionnement	-20 °C à 70 °C (Choisissez des matériaux d'étanchéité résistants aux hautes températures. Plage de températures de fonctionnement : 0 à 150 °C.)
Appliquer de l'huile / Ajouter de l'huile / Lubrifier	Cylinder section: No lubrication required.
Formulaire de mise en mémoire tampon	Plaque anti-collision
Repeatability	±0.1mm
Clamping force (N)	14	45	74	131	228
Fréquence maximale de fonctionnement	40 times per minute				20 times per minute
Taille du filetage d'interface	M5*0,8				PT1/8

Les types de filetage disponibles pour le raccordement sont notamment les filetages PT, G et NPT.

Standard Stroke

Diamètre intérieur en mm (diamètre de l'alésage)	Course standard (mm)	Course maximale
10	20.30.40.60	60
16	30.40.60.80	80
20	40.60.80.100	100
25	40.60.80.100	100
32	60.80.100.150	150