Produits

Vérin d'arrêt des séries TWH et TWM

Conforme aux normes JIS ;
Features a thickened piston rod, effectively enhancing the cylinder’s impact resistance;
Heavy-duty stopper cylinders are equipped with hydraulic shock absorbers (fixed or adjustable) to reliably absorb impact energy;
Lever-type roller stopper cylinders feature a self-locking mechanism to prevent the rocker arm from rebounding and pushing back against the stopped object;
A wide range of stopper cylinder series and specifications is available for customer selection.

Partager avec ses amis :

TWH TWM series Stopper Cylinder—also known as lever-roller type stopper cylinders—are designed specifically to withstand high impact forces and are intended for use on heavy-duty assembly lines.

Operating Principle
A pneumatic cylinder lifts, causing the rocker arm to pivot upward and the roller to protrude, thereby blocking the moving workpiece pallet; when air pressure is applied to retract the arm, the workpiece is released.
Supports two operating modes: double-acting and single-acting (with automatic spring-assisted extension).

Lever-type roller blocking mechanism.

Equipped with a self-locking mechanism to prevent the rocker arm from rebounding and pushing back against the obstructed object.

Thickened piston rod.

Heavy-duty stopper cylinders equipped with hydraulic shock absorbers—or adjustable hydraulic shock absorbers—reliably absorb impact energy.

The unit features built-in sensor mounting grooves, facilitating the installation of magnetic switches.

Technical Specifications

Série		TWH							TWM
Bore diameter (inner diameter mm)		20	25	32	40	50	63	80	50
Type d'action		Double-acting type, single-acting pilot-operated type
Milieu de travail		Air (filtré à travers un tamis à mailles de 40 µm)
Plage de pression de service	Type à double effet	0.15~1.0Mpa(23~145psi)
	Single-acting push-type	φ20：0.25~1.0Mpa(35~145psi) Other：0.2~1.0Mpa(28~145psi)
Résistance à la pression garantie		1.5Mpa（215psi)
Température de fonctionnement		-20 °C à 70 °C
Travel tolerance range		+1.0
Cushioning type		Plaque anti-collision
lubricating		No
Méthode d'installation		Flanged type
Blocking method		Lever-type roller (non-adjustable shock absorber)		Lever-actuated roller type (adjustable shock absorber)
Connection port size		M5*0,8		PT1/8			PT1/4		PT1/8
Proximity sensor thread profile		M5*0.5				M8*1.0