Partager avec ses amis :
pneumatic silencer muffler is a multi-port manifold silencer box, an integrated pneumatic noise-reduction component. The box is fitted with several inlet ports, so multiple exhaust lines are led into the box together and centrally silenced through internal acoustic foam / sintered filter elements, with a single outlet for discharge. It replaces several separate small silencers and is mostly used for centralized exhaust on manifold blocks.
Compressed air exhausted by the multiple valves enters the chamber of the silencer box through each inlet port. The airflow is buffered and diffused inside the chamber, its noise is absorbed by the internal silencing media and its speed is reduced, before it is finally discharged together through the common outlet. By collecting and buffering the multiple airflows, it avoids the overlapping noise caused by direct discharge of several streams.
Centralized silencing of multiple exhaust lines saves mounting space; it simplifies piping and keeps the manifold block layout neat and tidy; noise reduction is better than with scattered small silencers; fewer parts reduce material cost; it prevents splashing of debris and oil; and it allows convenient unified maintenance and cleaning.
For manifold blocks with many valves and dense exhaust ports; for machines with high noise-reduction requirements; for a clean look with fewer scattered silencers; for narrow spaces where individual silencers cannot be mounted; and for dusty, oily conditions requiring centralized protection.
Automation equipment factories, solenoid valve manifold block manufacturers, modular equipment, machine tools, packaging machinery, pneumatic integrators and foreign trade equipment manufacturers.
Centralized exhaust positions of solenoid valve manifold blocks, side-by-side multi-valve groups, production line modules, stamping equipment, and multi-port exhaust points of pneumatic tooling and fixtures.
Equipment used with it includes: dryers, refrigerated air dryers, packaging machines, solenoid valve groups, cylinders, vacuum generators, electronic drain valves, pneumatic motors, pneumatic diaphragms, pneumatic punch presses and hot stamping machines.
| Modèle | XT-120 | XY-175 |
| Fluide de travail | Air (filtered by a 40 μm or finer filter element) | |
| Maximum Operating Pressure | 0~10 kgf/cm² | |
| Temperature | -10~50 ℃ (no freezing) | |
| Matériau de la carrosserie | Plastic ABS | |
| Application Range | 1 cylinder, bore < 80 mm applicable | 3 cylinders, bore < 63 mm applicable |
| Thread Size | φ8 mm push-in port | |