Produits

Pneumatic speed control muffler

  • Combines flow control and silencing in a single unit, replacing the traditional two-piece setup (flow control valve + standard silencer) to save costs and installation space.
  • Features a top adjustment knob to regulate exhaust flow and precisely control cylinder operating speed; includes a locking nut to prevent loosening due to vibration.
  • Equipped with a sintered copper filter element that provides effective noise reduction—lowering sound levels by approximately 20 dB at 0.5 MPa.
  • Standard PT/G external threads allow for direct, convenient installation into exhaust ports.
  • Operating pressure range: 0–1.0 MPa; pressure resistance: 1.5 MPa; suitable for standard compressed air applications.
  • Materials: Brass body with a sintered copper silencing element.
  • Limitations: Controls only the exhaust side (exhaust throttling); the filter element is prone to clogging from oil accumulation, which increases back pressure and impairs cylinder operation; not suitable for vacuum circuits.
  • Note: As an exhaust-side flow control device, it can only regulate cylinder speed; it cannot adjust the intake flow rate.

Partager avec ses amis :

BESL pneumatic speed control muffler is a combined exhaust throttling and silencing fitting. With an adjustment knob and a sintered bronze filter element, it is threaded directly onto the exhaust ports of solenoid valves and cylinders to adjust the exhaust flow while reducing noise.

The exhaust airflow first passes through the top throttling structure; turning the knob changes the flow area to control the exhaust speed. The regulated airflow then passes through the sintered porous filter element, where it is dispersed and slowed down and sound waves are absorbed before being discharged into the atmosphere. After adjustment, the lock nut can be tightened to prevent drift caused by vibration.

Caractéristiques

One component provides both speed control and silencing, eliminating a separate exhaust throttle valve. Turning the knob controls the exhaust speed and thus the cylinder speed. The noise reduction is stable, while mounting space is saved and the pneumatic circuit is simplified.

For applications where the cylinder action speed needs to be controlled while exhaust noise is reduced; and where mounting space is limited.

Large éventail d'applications

Automation equipment plants, packaging machinery, non-standard equipment, production lines, pneumatic integrators and pneumatic component traders.

Exhaust ports of pneumatic components such as cylinders, solenoid valves, mechanical valves and foot pedal valves, at stations where the cylinder extend / retract speed needs to be controlled while noise is reduced.


Caractéristiques techniques

Nom du produitPneumatic Speed Control Muffler
Fluide de travailClean Air
Pression d'essai maximale1,32 MPa (13,5 kgf/cm²)
Plage de pression de service0 à 0,9 MPa (0 à 10,2 kgf/cm²)
Température ambiante et température du fluide0 à 60 °C
Fil de discussion disponibleFil de discussion PT
Matériau de la carrosserieAll Brass





Pneumatic Speed Control Muffler Order Code Generator

Code de commande actuel :
BESL-01
BESL
2
01

Remarques :
1. Spec: BESL copper pneumatic speed control muffler. Thread sizes: PT1/8, PT1/4, PT3/8, PT1/2, PT3/4, PT1.
2. For other requirements, please contact us for consultation.

Logo MYFEQD NEW2

Envoyez-nous un message

Fabricants de matériel pneumatique en Chine