제품

MF 시리즈 소형 공압 실린더

  •  JIS 표준을 준수하며;
  • 이 피스톤 씰은 콤팩트하면서도 오일 유지 기능을 갖춘 특수한 복동식 설계를 특징으로 하며;
  • Fixed bumpers on the front and rear covers reduce impact during cylinder reversal;
  • Various rear cover configurations facilitate convenient installation;
  • A reliable connection is achieved by mechanically crimping the front and rear covers to the stainless steel cylinder barrel;
  • The cylinder barrel is made of high-precision stainless steel tubing, offering high strength and corrosion resistance;
  • For the same bore size and stroke, the MF series cylinder is more compact in length than ISO 6432 standard cylinders.

친구들과 공유하기:

MF 시리즈 소형 공압 실린더 is a JIS-standard, compact stainless steel pneumatic actuator—a widely used miniature round cylinder characterized by its small size and lightweight design, making it ideal for the restricted installation spaces found in automation equipment.

다양한 장착용 액세서리: 축 방향 장착 브래킷(LB), 전면 플랜지(FA), 후면 클레비스 브래킷(SDB) 및 중간 트러니언 브래킷(TC).

MF Cylinder Various mounting accessories

리벳 접합 및 롤링 이음 구조: 전면 및 후면 커버는 리벳과 롤링 이음 구조를 통해 스테인리스 스틸 실린더 본체에 결합되어 있어, 견고한 연결을 보장합니다.

다음과 같은 다양한 후면 커버 구성이 제공됩니다:
CA (clevis mount), U (radial air inlet),  and CM (round end cap) options facilitate installation and use across various operating conditions.

Diagram of MF Stainless Steel Mini Cylinder Rear Cap Types

A wide range of cylinder specifications is available: MF (double-acting), MSF (single-acting, push type), MTF (single-acting, pull type), MFD (dual-shaft, double-acting), MFJ (dual-shaft, double-acting, adjustable stroke), MFC (double-acting, adjustable cushioning), MFCD (dual-shaft, double-acting, adjustable cushioning), and MFCJ (dual-shaft, double-acting, adjustable stroke and cushioning).

MF Mini Cylinder: Specifications and Diagrams

 

The front and rear covers feature fixed anti-collision cushioning pads, and the adjustable cylinder utilizes an air-cushioning mode.

공압 실린더의 이론적 출력 힘 차트

MF Cylinder Output Force Table

Technical Specifications for MF Pneumatic Cylinders

내경 mm (구경)20253240
실린더 작동 방식Double-acting, double-acting with cushioning, single-acting (push type), single-acting (pull type)
작업 매체공기 (40 µm 메쉬 스크린을 통해 여과된)
작동 압력 범위양방향 작동 방식0.15~1.0 MPa(22~145 psi)(1.5~10 bar)
단동식0.2~1.0MPa(28~145psi)(2.0~10bar)
압력 내성 보장1.5 MPa(215 psi)(15 bar)
작동 온도-20°C~70°C (내열성이 뛰어난 밀봉 재료를 선택하십시오. 작동 온도 범위: 0–150°C.)
작동 속도 범위양방향 작동 방식: 30–800 mm/s 단방향 작동 방식: 50–800 mm/s
스트로크 허용 범위0~150 +1.0 >150 +1.5
버퍼링 양식MFC, MFCD, and MFCJ series feature adjustable air cushioning, while other series utilize rubber bumpers for cushioning.
인터페이스 나사 규격PT1/8PT1/4
자석식 스위치 센서와 호환됨Airtac 규격 CS1 시리즈, Airtac 규격 DMS 시리즈, SMC 규격 D-Z73/A93 시리즈

표준 스트로크

내경 mm (구경)표준 스트로크(mm)최대 스트로크스트로크 허용
MF MFC2010  15  20  25  30  40  50  60  75  80  100  125  150  160  175  200  250  300 350 400 450 500500800
2510  15  20  25  30  40  50  60  75  80  100  125  150  160  175  200  250  300 350 400 450 500500800
3210  15  20  25  30  40  50  60  75  80  100  125  150  160  175  200  250  300 350 400 450 500500800
4010  15  20  25  30  40  50  60  75  80  100  125  150  160  175  200  250  300 350 400 450 500500800
MFD MFCD MFJ MFCJ2010  15  20  25  30  40  50  60  75  80  100  125  150  160  175  200  250  300300..
2510  15  20  25  30  40  50  60  75  80  100  125  150  160  175  200  250  300300..
3210  15  20  25  30  40  50  60  75  80  100  125  150  160  175  200  250  300 350 400 450 500500..
4010  15  20  25  30  40  50  60  75  80  100  125  150  160  175  200  250  300 350 400 450 500500..
MSF MTF2010  15  20  25  30  40  50  60  75  80  100  125  150....
2510  15  20  25  30  40  50  60  75  80  100  125  150....
3210  15  20  25  30  40  50  60  75  80  100  125  150....
4010  15  20  25  30  40  50  60  75  80  100  125  150....

완제품 주문 코드

MF Mini Stainless Steel Finished Product Order Code Chart

For further details about this product—such as dimensions, internal structure, material specifications, or accessory information—please contact our technical engineers and sales managers.

Contact us.

MYFEQD 로고 NEW2

메시지를 보내주세요

중국의 공압 장비 제조업체