제품

HFR 시리즈 핑거 실린더 180° 개폐형

  • Extra-wide 180° opening angle
  • Wear-resistant, reinforced structure
  • Dust-proof design
  • Multi-directional mounting
  • Standard magnet included; built-in sensor slot
  • Rubber shock-absorbing pads

친구들과 공유하기:

HFR series Finger cylinder 180° Opening/Closing Type consists of pneumatic grippers featuring a 180° wide-opening, pivot-style action; all models are double-acting and designed as direct equivalents to the SMC MHY2 series. Utilizing a cam drive mechanism to rotate the two gripper jaws around a pivot point, they achieve a maximum opening angle of 180°—allowing the jaws to lie completely flat—making them specialized cylinders for wide-angle gripping applications.

Dual-piston and cam-driven mechanism with dual-port pneumatic control:
Air Inlet 1: Gripper jaws retract inward to clamp;
Air Inlet 2: Gripper jaws rotate outward to open, spreading flat to 180°;
No internal springs; opening and closing are controlled by air pressure, and the jaws maintain their current position upon loss of air supply.

A metal sheet separates the gripper and the front cover, reducing wear and extending service life.

The finger opening and closing mechanism features a special design that effectively prevents debris from entering.

180° opening/closing action simplifies pick-and-place operations and avoids the workspace occupied by moving workpieces.

Mounting holes are provided on both the side and bottom surfaces to facilitate installation and use under various conditions; mounting options include side, rear, and front configurations.

Mounting slots for round sensors (magnetic switches) are provided on two sides, eliminating the need for mounting accessories and offering convenience and flexibility.

기술 사양

구경 (mm)1016202532
작용 형태양방향 작동 방식
작업 매체공기 (40 µm 메쉬 스크린을 통해 여과된)
작동 압력 범위0.2~0.7Mpa(29~100psi)(2.0~7.0bar)0.15~0.7Mpa(22~100psi)(1.5~7.0bar)
작동 온도-20°C~70°C
오일 도포 / 오일 주입 / 윤활Cylinder section: Not required; Gripper moving parts: Required (apply grease to parts with relative motion).
쿠션 유형충돌 방지 패드
최대 동작 주파수60 (C.P.M)
재현성±0.2mm
Clamping torque (N·m)0.160.551.12.35
Opening/closing angle (°)Closure: -2 to -5      Opening: 180 ±2
설치 방법Side mounting, front threaded hole mounting, front through-hole mounting, rear mounting
인터페이스 나사 규격M5×0.8
Magnetic sensor switchCMSH  DMSH  EMSH

The clamping torque value applies when using an air pressure of 0.5 MPa.

HFR series Finger cylinder 180° Opening/Closing Type Finished Product Order Code

HFR series Finger cylinder 180° Opening/Closing Type Finished Product Order Code

내부 구조, 재질 사양, 외부 치수 및 부속품에 대해 더 자세히 알아보시려면,

“문의하기”를 클릭하세요.”

MYFEQD 로고 NEW2

메시지를 보내주세요

중국의 공압 장비 제조업체