친구들과 공유하기:
TCL TCM 시리즈 가이드 로드 공압 실린더 are three-rod, non-rotating, three-axis pneumatic cylinders (commonly referred to as compact three-axis cylinders with guide rods). Structurally, they integrate a piston rod, two parallel guide rods, and a top load-mounting plate; this design counteracts lateral forces and prevents piston rod rotation, making them suitable for applications such as workpiece lifting, clamping, stopping, and precision pushing. While the two models share identical external mounting dimensions and profiles, the key difference lies in the type of internal guide bearings used, allowing them to meet diverse operating requirements; they are highly versatile, compact pneumatic components widely used in the automation industry.
Optional guide bearings: steel ball linear bearings (TCL) and brass sliding bearings (TCM).
Guide rod structure: Two guide rods made of special bearing steel, featuring high resistance to torsional and lateral loads.
The top and side surfaces of the unit are each equipped with a set of air inlet and outlet ports, facilitating use under various operating conditions.
Available in TCL(M) standard and TCL(M)J adjustable models.
The cylinder body features mounting slots for magnetic sensors along its periphery.
Mounting holes are provided on the top, bottom, and rear surfaces of the unit, allowing for various installation and mounting methods.
| 구경 (mm) | 6 | 10 | 12 | 16 | 20 | 25 | 32 | 40 | 50 | 63 | 80 | 100 | |
| 작용 형태 | 양방향 작동 방식 | ||||||||||||
| 작업 매체 | 공기 (40 µm 메쉬 스크린을 통해 여과된) | ||||||||||||
| 작동 압력 범위 | 0.2~0.7 MPa(29~100 psi) | 0.15~1.0 MPa(22~145 psi) | |||||||||||
| 압력 내성 보장 | 1.2Mpa(175psi) | 1.5Mpa(215psi) | |||||||||||
| 작동 온도 | -20°C~70°C (내열성이 뛰어난 밀봉 재료를 선택하십시오. 작동 온도 범위: 0–150°C.) | ||||||||||||
| 작동 속도 범위 | 50~500mm/s | 30~500mm/s | 50~400mm/s | ||||||||||
| 스트로크 허용 범위 | ≼100 +1.0 ＞100+1.5 | ||||||||||||
| 버퍼링 양식 | 충돌 방지 패드 | ||||||||||||
| Non-reversal accuracy | Linear bearing | .. | ±0.08° | ±0.07° | ±0.06° | ±0.05° | ±0.04° | ||||||
| Bronze sleeve bearings | ±0.1° | ±0.10° | ±0.09° | ±0.08° | ±0.06° | ±0.05° | |||||||
| 인터페이스 나사 규격 | M3*0.5 | M5×0.8 | PT1/8 | PT1/4 | PT3/8 | ||||||||
| 자석식 스위치 센서와 호환됨 | DS1 Series, CS1 Series, DMSG Series, DMSE Series, DMSH Series, CMS Series, D-A93 Series, D-Z73 Series, D-C73 Series | ||||||||||||
이 연결부에 사용할 수 있는 나사산 유형으로는 PT, G, NPT가 있습니다.
| 내경 mm (구경) | 표준 스트로크(mm) | 최대 스트로크 |
| 6 | 5.10.15.20 | 20 |
| 10 | 5.10.15.20.25.30 | 30 |
| 12 | 10.20.25.30.40.50.60.70.75.80.90.100.125.150 | 150 |
| 16 | 10.20.25.30.40.50.60.70.75.80.90.100.125.150.175.200 | 200 |
| 20/25 | 20.25.30.40.50.60.70.75.80.90.100.125.150.175.200.225.250 | 250 |
| 32/40/50/63 | 25.30.40.50.60.70.75.80.90.100.125.150.175.200.225.250 | 250 |
| 80/100 | 25.30.40.50.60.70.75.80.90.100.125.150.175.200.225.250 | 250 |
중국의 공압 장비 제조업체
