Produkty

Siłownik hydrauliczny do lekkich zastosowań MOB

Chrome-Plated Piston Rod: Shaft Material — 45# High-Carbon Steel. Shaft Gloss — 22/58 Degrees. Shaft Precision — G6, G8, H7. Surface Roughness — Ra 0.2–0.4 µm. Hard Chrome Plating Thickness — 0.02 mm. Hardened Layer Depth — 0.8–3 mm.
Premium Oil Seals: Long-lasting and durable; resistant to high pressure, high temperatures, abrasion, corrosion, acids, and alkalis.
High-Temperature Baked Enamel Cylinder Barrel: The inner bore is finely polished and baked at 200°C to ensure a chip-resistant finish, guaranteeing smooth operation and exceptional durability.

Udostępnij znajomym:

lightweight hydraulic cylinder is a compact, lightweight, and small-volume hydraulic actuator primarily utilized in medium-to-low pressure applications to convert hydraulic energy into mechanical energy in the form of linear reciprocating motion.

Product Specifications:

Product Brand：	MYFEQD	Pneumatic Pressure:	1kg/cm²
Product Name:	Tie-Rod Type Light-Duty Hydraulic Cylinder (MOB)	Standard Temperature:	-10°C~+80°C （Customizable to increase heat resistance.）
Rated Pressure:	70kg/cm²	Operating Medium:	46#/32#

Installation Method:


FA Front Flange Mounting	FB Rear Flange Installation	CA Single-Ear Installation

CB Dual-Ear Mounting	TC Trunnion Mount	LB Foot Install

Pneumatic Y-Connector	Pneumatic Fisheye Fittings	Pneumatic I-Type Connector

Using Parameters

Model	Installation distance	Port size	Piston port size
MOB32	36	ZG1/4	M14*1,5
MOB40	45	ZG3/8	M16*1,5
MOB50	50	ZG3/8	M16*1,5
MOB63	60	ZG3/8	M22*1,5
MOB80	74	ZG1/2	M26*1.5
MOB100	90	ZG1/2	M30*1.5
MOB125	110	ZG1/2	M40*2
MOB160	145	ZG3/4	M52*2

How do you interpret a hydraulic cylinder model number?

Measure the length of the cylinder barrel.
Measure the height dimension of the square cover (end cap).
Measure the diameter of the piston rod.
Measure the boss diameter of the end cover.

By measuring the four data points listed above based on the sample you currently have, you can identify the specific product model you require.

How do you calculate the pulling and pushing forces of a hydraulic cylinder?

Effective Cross-sectional Area × Oil Pressure = Output Force

The following calculations are based on a value of 50 kgf/cm².

Cylinder Bore	Cylinder Piston Rod Diameter	pull	thrust
30mm	16mm	255kg	355kg
32mm	16mm	300kg	400kg
40mm	20mm	470kg	630kg
50mm	20mm	825kg	980kg
63mm	25mm	1300kg	1500kg
80mm	30mm	2100kg	2500kg
100mm	35mm	3400kg	3900kg
125mm	50mm	5100kg	6100kg

How is the extension and retraction speed of a hydraulic cylinder calculated?

The extension and retraction speed of a hydraulic cylinder is determined by the cylinder’s volume and the flow rate of the hydraulic system.

For example: If the flow rate of the hydraulic system is 20 L/min, and a single round trip of the hydraulic cylinder requires 2 L of fluid—that is, 20 ÷ 2 = 10—then the cylinder can complete approximately 8 round trips per minute.

To learn more, prosimy o kontakt; we will provide you with detailed answers to your inquiries.