– Uses only compressed air; eliminates the need for a hydraulic power unit, resulting in lower costs and simple installation.
– Delivers high output force with a compact footprint; smaller than a hydraulic cylinder for the same force output.
– Provides stable output with adjustable pressure and stroke.
– Operates quietly and carries a lower risk of oil leakage compared to standalone hydraulic systems.
20 عامًا من الخبرة في قطاع التصنيع، نقدم حلولًا مخصصة مصممة وفقًا لمواصفاتكم ومتطلباتكم الإنتاجية بالضبط.
أكثر من 20 عامًا من الخبرةتضاهي الجودة التي نقدمها جودة العلامات التجارية الكبرى، حيث نلتزم التزامًا صارمًا بالمعايير الفنية للعلامات التجارية الرائدة على الصعيدين المحلي والدولي.
جودة متوافقة مع معايير ISOتقع شركتنا في مدينة ليوشي، بمقاطعة يوتشينغ، في مدينة ونتشو، بمقاطعة تشجيانغ، الصين، وتتميز بسلسلة إمداد شاملة لمكونات المنتجات، ومعدات متطورة وعالية الجودة، وتاريخ عريق في مجال التصنيع.
أسعار المصنع المباشرةA booster cylinder (also known as a pneumatic-hydraulic booster cylinder or force-amplifying cylinder) is a force-amplifying actuator that combines pneumatic and hydraulic technologies;
it accepts low-pressure compressed air as input and outputs high-pressure hydraulic force,
requiring only an air supply and no hydraulic pump station.
1. Integrated design requiring only an air supply; eliminates the need for oil pumps, oil tanks, and hydraulic power units, simplifying installation.
2. Rapid approach to the workpiece with pre-pressure; automatic pressure intensification upon contact ensures a “soft landing” to protect the mold.
3. High output force; more compact than hydraulic cylinders of the same tonnage, with low noise operation.
4. Pressure is adjustable via an air pressure regulator; maintenance is simple.
| Item | Total Output (T) | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| 1 | 3 | 5 | 10 | 13 | 15 | 20 | 30 | 40 | |
| Bore (mm) | 63 | 63 | 80 | 100 | 100 | 125 | 125 | 125 | 160 |
| Action Type | مزدوج المفعول | ||||||||
| Working Medium | Air (filtered through 40μm) + ISO VG68 Oil, 2~7 kg/cm² | ||||||||
| درجة حرارة العمل | -5°C ~ +60°C | ||||||||
| Operating Speed | 50~700 mm/s | ||||||||
| Oil Cylinder Proof Pressure | 300 kg/cm² | ||||||||
| Air Cylinder Proof Pressure | 15 kg/cm² | ||||||||
| Operating Frequency | 20~30 cycles/min | 10 cycles/min | |||||||
| Piston Rod End Thread | M30×1.5 | M30×1.5 | M30×1.5 | M39×2 | M39×2 | M48×2 | M48×2 | M48×2 | M63×2 |
| موضوع الميناء | G3/8 | G1/2 | |||||||
1. High-speed reciprocating motion; suitable for continuous operation with short cycle times on automated production lines.
2. Strict separation of oil and air minimizes bubble formation, ensuring more stable output and longer seal life.
3. Integrated design; supports standard vertical mounting (output force directed downward) as well as horizontal installation.
4. Pressure is adjustable via an air supply regulator; maintenance is simple.
| Item | Total Output (T) | ||||||||
|---|---|---|---|---|---|---|---|---|---|
| 1 | 3 | 5 | 10 | 13 | 15 | 20 | 30 | 40 | |
| Bore (mm) | 63 | 63 | 80 | 100 | 100 | 125 | 125 | 125 | 160 |
| Action Type | مزدوج المفعول | ||||||||
| Working Medium | Air (filtered through 40μm) + ISO VG68 Oil, 2~7 kg/cm² | ||||||||
| درجة حرارة العمل | -5°C ~ +60°C | ||||||||
| Operating Speed | 50~1000 mm/s | ||||||||
| Oil Cylinder Proof Pressure | 300 kg/cm² | ||||||||
| Air Cylinder Proof Pressure | 15 kg/cm² | ||||||||
| Operating Frequency | 20~30 cycles/min | 10 cycles/min | |||||||
| Piston Rod End Thread | M30×1.5 | M30×1.5 | M30×1.5 | M39×2 | M39×2 | M48×2 | M48×2 | M48×2 | M63×2 |
| موضوع الميناء | G3/8 | G1/2 | |||||||
1. Maintains high-pressure thrust throughout the entire piston rod stroke; no need for workpiece contact to trigger pressure intensification.
2. Compact, integrated design allows for easy installation and eliminates the need for a hydraulic pump station.
3. Delivers stable output force; pressure can be adjusted via an air supply regulator.
4. Features a built-in pressure gauge port for direct pressure monitoring.
| Item | Total Output (T) | |||||
|---|---|---|---|---|---|---|
| 1 | 2 | 3 | 5 | 8 | 13 | |
| Bore (mm) | 50 | 50 | 50 | 50 | 80 | 80 |
| Action Type | مزدوج المفعول | |||||
| Working Medium | Air (filtered through 40μm) + ISO VG32 Oil, 2~7 kg/cm² | |||||
| درجة حرارة العمل | -5°C ~ +60°C | |||||
| Operating Speed | 50~700 mm/s | |||||
| Oil Cylinder Proof Pressure | 300 kg/cm² | |||||
| Air Cylinder Proof Pressure | 15 kg/cm² | |||||
| Operating Frequency | ≥ 20 cycles/min | |||||
| Piston Rod End Thread | M16×2 | M16×2 | M16×2 | M30×1.5 | M30×1.5 | M39×2 |
| موضوع الميناء | G1/4 | G1/4 | G1/4 | G1/4 | G3/8 | G1/2 |
1. Special sealing materials ensure the sealing performance of the hydraulic cylinder;
2. The hydraulic cylinder barrel undergoes special treatment, significantly enhancing wear and corrosion resistance;
3. Features a spindle air-blast function.
| Total Output at 0.6MPa | 3.5T | 4.5T | 6.0T |
|---|---|---|---|
| Action Type | Oil End: Single Acting Air End: Double Acting | ||
| Working Medium | Air (filtered through 40μm) + ISO VG32 Oil, 2~7 kg/cm² | ||
| درجة حرارة العمل | -5°C ~ +60°C | ||
| Operating Pressure Range | 0.5~0.8 MPa | ||
| Air Cylinder Proof Pressure | 1.0 MPa | ||
| موضوع الميناء | PT3/8 | PT3/8 | PT3/8 |
| No. | Series | النوع | الميزات الرئيسية | Typical Application |
|---|---|---|---|---|
| 01 | MPT | Standard pre-press booster | Most common standard air-oil booster; faster than hydraulic, oil-level output; total stroke adjustable; leak-proof design; output 1T–40T; simple setup, easy maintenance, low noise | General press-fitting, punching, riveting, bending; electronics / automotive |
| 02 | MPTF | High-speed booster | Upgraded from MPT for speed; fast pre-press approach and quick boost response; high-cycle operation; for high-takt automation lines | High-frequency press-fitting, fast stamping, assembly lines |
| 03 | MPTC | Direct-press booster | Direct-pressure structure (no pre-press stroke, presses in one go); short stroke, high force; more compact body; for direct-force applications | Short-stroke press, riveting, punching |
| 04 | NPM | Compact booster | Compact mounting variant; same air-oil principle as MPT but smaller footprint; for space-constrained booster stations | Compact equipment, small press-fitting |
يتم ذكر أسماء العلامات التجارية الواردة في هذا الموقع الإلكتروني لغرض الإشارة إلى المعايير الفنية فقط. هذا المنتج ليس منتجًا أصليًّا من العلامة التجارية المعنية، كما أنه غير معتمد من قبلها. وقد تم تصنيعه وفقًا للمواصفات الفنية للعلامة التجارية المعنية ويتميز بمظهر مشابه لها؛ إلا أنه منتج تم تطويره بشكل مستقل ولا تربطه أي صلة بالعلامة التجارية المذكورة.
Suitable for stamping, press-fitting, riveting, punching,
bending, fixture clamping, and mold locking; widely used in automation equipment for applications such as bearing pressing,
plastic component pressing, and hardware riveting.
وحدة تغذية الأكياس، رأس الختم، بوابة القادوس، طي أجنحة الكرتون، دافع التفريغ
تحديد موضع قطعة العمل وتثبيتها، وآليات الرفع للتحميل والتفريغ، وآليات التوقف، وتركيب المكونات بالضغط.
تحديد موضع أجهزة اللحام، وتثبيت قطعة العمل، ونقل المكونات
موانع خط التجميع، ودافعات الفرز، ووحدات رفع المنصات.
فتح وإغلاق أبواب الآلات المكنية، وتغذية قطع العمل، وإخراج المخلفات.
لوحة توجيه الناقل، جهاز تثبيت بسيط (تتوفر نسخة من الفولاذ المقاوم للصدأ للبيئات الرطبة)
MYFEQD تقدم مجموعة شاملة من Booster Cylinder الحلول.
تتوافق مشغلاتنا الهوائية مع المعايير الفنية للعلامات التجارية العالمية الكبرى،,
تقديم حلول سريعة لاختيار النماذج في مختلف المجالات الصناعية
الأنظمة الهوائية.
No hydraulic power unit, pump or oil lines—high force from shop air, clean, energy-saving and low maintenance.
A pneumatic-hydraulic hybrid: air input, high-pressure oil output—a converter and amplifier.
Low-pressure fast approach saves time; high pressure engages only after contact, balancing speed and force.
Air drives the booster piston, compressing a sealed oil chamber; oil is incompressible, so pressure spikes.
Insufficient oil lets air enter the oil during stroke, causing unstable force, creeping and noise.
If oil runs out before the stroke ends, cavitation occurs; oil must cover the full stroke.
Complete air-oil separation prevents gas mixing, stabilizing force and avoiding cavitation/emulsification.
Output tonnage, total stroke and power stroke.
Pre-pressure is taller with two-stage structure; direct-pressure is shorter with one stage.
High-speed type, large-flow valve and air-oil separated design.
Fill to the gauge mark via the filler port and vent air initially.
Different ports/valves control them; boost triggers after contact.
Check supply pressure, internal leakage, low oil and valve leaks.
Dry hits release high force without a workpiece, shocking and damaging parts.
Damaged seals, overfilled oil, damaged barrel or oil through the valve.
Provide process, workpiece, tonnage, strokes and dimensions for the manufacturer to assist.
الشركات المصنعة للهواء المضغوط في الصين
