Produkty

Precyzyjny siłownik suwakowy z podwójnym tłoczyskiem serii HLQ

HLQ Series Twin-Rod Precision Slide Cylinder 1

Precyzyjny siłownik suwakowy z podwójnym tłoczkiem serii HLQ 2

HLQ Series Twin-Rod Precision Slide Cylinder 3

Precyzyjny siłownik suwakowy z podwójnym tłoczyskiem serii HLQ

Double the thrust, high torsional rigidity
High precision, low friction; stable at high speeds.
Multi-directional mounting; suitable for various compact devices.
Durable sealing, long service life
Modular configuration and easy commissioning.

Udostępnij znajomym:

Precyzyjny siłownik suwakowy z podwójnym tłoczyskiem serii HLQ is a double-acting, precision linear pneumatic actuator that integrates dual piston rods with a dual-row recirculating ball linear guide system. Designed as a direct alternative to the MXQ series, it is available in two variants: the standard HLQ and the symmetrical HLQL. Its symmetrical dual-shaft structure delivers double the thrust and exceptional torsional rigidity, making it a versatile, high-precision slide unit for transfer and positioning tasks on automated production lines, balancing installation flexibility with robust load-bearing capacity.

A variety of external stop configurations are available, facilitating selection for different operating conditions.

Dual precision linear guides ensure high precision and high rigidity, while offering rust and dust resistance.

Through-holes are provided above the slider to facilitate top-down mounting of the main body; the bottom and end faces feature threaded mounting holes, and the bottom face includes integrated holes for positioning pins, allowing the cylinder to be mounted and secured from three directions.

Dual-piston design delivers double the output force.

The use of a floating joint design ensures the piston rod is not subjected to additional load moments.

The top and front side surfaces of the slide unit are equipped with mounting holes for securing fixtures, while the top surface of the slide block features integrated holes for mounting positioning pins.

A mounting groove for a magnetic sensor switch is provided on the side of the unit body.

Available in standard (HLQ) and symmetrical (HLQL) types.

Cylinder Theoretical Output Force Chart Unit: Newton (N)

Cylinder bore	Cylinder outer diameter	Action Type		Compressed area (mm²)	Air Pressure (MPa)
Cylinder bore	Cylinder outer diameter	Action Type		Compressed area (mm²)	0.2	0.3	0.4	0.5	0.6	0.7
6	3	Dwustronnego działania	Side-press	42	8	13	17	21	25	29
6	3	Dwustronnego działania	Pull- side	57	11	17	23	29	34	40
8	4	Dwustronnego działania	Side-press	75	15	23	30	38	45	53
8	4	Dwustronnego działania	Pull- side	101	20	30	40	51	61	71
12	6	Dwustronnego działania	Side-press	170	34	51	68	85	102	119
12	6	Dwustronnego działania	Pull- side	226	45	68	90	113	136	158
16	8	Dwustronnego działania	Side-press	302	60	91	121	151	181	211
16	8	Dwustronnego działania	Pull- side	402	80	121	161	201	241	281
20	10	Dwustronnego działania	Side-press	471	94	141	188	236	283	330
20	10	Dwustronnego działania	Pull- side	628	126	188	251	314	377	440
25	12	Dwustronnego działania	Side-press	756	151	227	302	378	454	529
25	12	Dwustronnego działania	Pull- side	982	186	295	393	491	589	687

Technical Specification

Bore diameter (mm)	6	8	12	16	20	25
Rodzaj działania	Typ dwustronnego działania
Środek roboczy	Powietrze (przefiltrowane przez sito o oczkach 40 µm)
Zakres ciśnienia roboczego	0.2~0.7Mpa(29~100psi)(2.0~7.0bar)		0.15~0.7Mpa(22~100psi)(1.5~7.0bar)
Gwarantowana odporność na ciśnienie	1.2Mpa（175psi)(12.0bar)
Temperatura pracy	-20°C–70°C (Należy wybrać materiały uszczelniające odporne na wysokie temperatury. Zakres temperatur roboczych: 0–150°C.)
Zakres prędkości roboczej	50–500 mm/s
Zakres tolerancji uderzeń	Stroke ≦100 +1.0 Stroke＞100 +1.5
Formularz buforowania	Cushioning at both ends; hydraulic shock absorber cushioning.
Compatible with magnetic switch sensors	CMSH/DMSH/EMSH
Interface thread size	M5*0,8				PT1/8

Dostępne typy gwintów do połączeń to PT, G i NPT.

Standardowy skok

Średnica wewnętrzna w mm (średnica otworu)	Skok standardowy (mm)	Maksymalny skok
6	10.20.30.40.50	50
5	10.20.30.40.50.75	75
12	10.20.30.40.50.75.100	100
16	10.20.30.40.50.75.100.125	125
20	10.20.30.40.50.75.100.125.150	150
25	10.20.30.40.50.75.100.125.150	150

Kod zamówienia gotowego produktu

To select the right product, determine the specific model and specifications based on actual application requirements, perform a verification check, and obtain the external dimensions. Please contact us (Wenzhou Maifeng Pneumatic Co., Ltd. / MYFEQD).